
Open-source KiCad boards
28 match “Keystone 3568”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 6 layers105 × 70 mm

- 2 layers163.8 × 100 mm

- 4 layers143 × 55 mm

- 4 layers126 × 57 mm

- 4 layers100 × 100 mm

A SGSS cskpin routed
ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module
571 parts1 - 4 layers230 × 135 mm

Vancontroller
Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.
259 parts - 2 layers60 × 46 mm

Cardboard bot
ColumbiaGadgetWorks/cardboard-bot-v2
60 × 46 mm, 2-layer, 2 oz copper, for a 2S or 3S LiPo on a screw terminal. JLCPCB assembles the SMD parts on the top side; CGW hand-solders the through-hole parts. Nothing goes on the back.
67 parts - 2 layers185 × 128 mm

Scorbot controller
ColumbiaGadgetWorks/scorbot
KiCad project for the replacement controller: an ESP32 DevKit, six Pololu DRV8874 carriers and a DROK mini 5 V buck module plug into a master board, and the robot's DD-50 cable plugs straight into the board edge.
102 parts - 4 layers100 × 100 mm

Smc power
efebasol/StepperMotorController
Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).
104 parts - 2 layers100 × 100 mm

WindTunnel Pico Carrier RevE
Mega-Gorilla/Wind_Tunnel
Independent control electronics, software, mounting parts and experiments for a wind tunnel based on MyWindTunnel.
61 parts - 6 layers115 × 70 mm

- 2 layers113.1 × 44.7 mm

Wakeuplight
solderdev/wakeuplight_v2
ESP32 LED-strip wakeuplight with audio stream, NTP, etc.
82 partsGPL-3.0 - 2 layers158 × 109.9 mm

- 2 layers116.7 × 99.3 mm

- 2 layers120.1 × 99.3 mm

- 6 layers240 × 160 mm

Pcb a power
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
397 parts4CERN-OHL-S-2.0 - 4 layers285 × 160 mm

Pcb a power
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
279 parts4CERN-OHL-S-2.0 - 4 layers285 × 160 mm

Pcb a power
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
214 parts4CERN-OHL-S-2.0 - 6 layers240 × 160 mm

Pcb a power
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
400 parts4CERN-OHL-S-2.0 - 4 layers285 × 160 mm

Pcb a power
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
137 parts4CERN-OHL-S-2.0 - 4 layers267 × 68 mm

Pcb e1-dock
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
189 parts4CERN-OHL-S-2.0 - 4 layers278 × 60 mm

Pcb e1-dock
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
97 parts4CERN-OHL-S-2.0 - 2 layers250 × 44 mm

Pcb e1-dock
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
24 parts4CERN-OHL-S-2.0 - 2 layers70 × 44 mm

Pcb p pack
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
60 parts4CERN-OHL-S-2.0
Parts matching “Keystone 3568”
See them in the parts library3000
-- ROHSKeystone ElectronicsBattery Connector5110
06030Ω 500mW 0603 Chip Resistor - Surface Mount ROHSKeystone ElectronicsChip Resistor - Surface Mount5117
-2.5mm Blue Pin Type (Through-Board) - Test Points / Test Rings ROHSKeystone ElectronicsPogo Pin Spring Probe Connector5108
1206Chip Resistor - Surface MountKeystone Electronics