2 layers116.7 × 99.3 mm
2 layers163.8 × 100 mm
MicroPanda
farmerbriantee/Ace7Modular Development of AOG
- Size
- 163.8 × 100 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 51
- Nets
- 106
- Pads
- 233
- Tracks, vias
- 267, 17
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Feb 2023
- Updated
- 14 Oct 2023
Overview
MicroPanda is an open-source printed circuit board by farmerbriantee, from the farmerbriantee/Ace repository on GitHub, published under the MIT licence. It is a 2-layer board of 163.8 × 100 mm with 51 parts on 106 nets, routed with 267 tracks and 17 vias.
Its parts include 16 capacitors, 14 connectors, 8 diodes, 6 ICs and 5 resistors.
README
README.mdAgOpenGPS **** Ace
Ace is a new way to run AOG where the modules are small, and everything is on the udp network.
This is a development Repo and changes often.
*** Important ****
If you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights as Outlined in the GPLv3 License.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C9, C11, C14, C15, C17 |
| 5 | LED | LED_THT:LED_D2.0mm_W4.0mm_H2.8mm_FlatTop | D4, D5, D6, D7, D8 |
| 4 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3, C4, C7, C8 |
| 4 | 470uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2, C5, C6 |
| 3 | 1N5401 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1, D2, D3 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | 1uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C10, C12, C13 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R4, R5 |
| 2 | 5V | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J9, J11 |
| 2 | B Micro USB | AA_Foots:USB_Mini_B_AdamTech_musb_b5_s_vt_02_TH | J2, J3 |
| 1 | 3.3V | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8 |
| 1 | 3.3V Reg | Converter_DCDC:Converter_DCDC_Murata_OKI-78SR_Vertical | U1 |
| 1 | 4 Pos DIP | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | 4x Terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J5 |
| 1 | 5V Reg | Converter_DCDC:Converter_DCDC_Murata_OKI-78SR_Vertical | U2 |
| 1 | Ada BNO085 | AA_Foots:BNO085_Adafruit_4754 | U4 |
| 1 | Chassis Gnd | Connector_Pin:Pin_D1.3mm_L11.0mm_LooseFit | J4 |
| 1 | F9P Micro Left | AA_Foots:MODULE_AS-RTK2B-MICRO-F9P-L1L2SMATH-00 | U5 |
| 1 | F9P Micro Right | AA_Foots:MODULE_AS-RTK2B-MICRO-F9P-L1L2SMATH-00 | U6 |
| 1 | GND | Connector_Pin:Pin_D1.3mm_L11.0mm_LooseFit | J14 |
| 1 | Keystone 3568 | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | POE Jumper | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | POE V+ | Connector_Pin:Pin_D1.3mm_L11.0mm_LooseFit | J13 |
| 1 | POE V- | Connector_Pin:Pin_D1.3mm_L11.0mm_LooseFit | J12 |
| 1 | RJ45 Abracon ARJP11A | Connector_RJ:RJ45_Abracon_ARJP11A-MA_Horizontal | J1 |
| 1 | Teensy 4.1 | AA_Foots:Teensy41_BGT | U3 |
| 1 | Tx3 Rx3 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | TxR RxL | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J10 |
More from farmerbriantee/Ace
4- 2 layers120.1 × 99.3 mm
- 2 layers158 × 109.9 mm
- 2 layers120.1 × 99.3 mm
Similar boards
- 2 layers216.9 × 86.8 mm
Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
51 parts2.1k - 2 layers49.4 × 94.2 mm
- 2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT - 2 layers170 × 162 mm
Snowflake
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
51 parts915 - 2 layers33 × 50 mm
- 2 layers
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
51 parts530 - 2 layers45.7 × 123.5 mm
- 2 layers50.8 × 69.2 mm
Uikit
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
51 parts341Apache-2.0
Questions
How big is the MicroPanda PCB?
It measures 163.8 × 100 mm and has 2 copper layers, 1.58 mm thick.
What parts does the MicroPanda use?
51 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicroPanda KiCad files?
From the farmerbriantee/Ace repository on GitHub, at the commit this page was made from: the board is KiCad/MicroPandaPOE/MicroPanda.kicad_pcb and its schematic KiCad/DualWithIMU/DualWithIMU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicroPanda design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).