
H C6-ulp
martinberlin/H-C6-ulp
ESP32C6 in a very low power design with a 24 pin FPC for a small SPI Epaper
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

martinberlin/H-C6-ulp
ESP32C6 in a very low power design with a 24 pin FPC for a small SPI Epaper


simplyzetax/ciu
Firmware for a connected motorcycle system, including bike telemetry, helmet communication, and a HUD.

martinberlin/H-C6-ulp
ESP32C6 in a very low power design with a 24 pin FPC for a small SPI Epaper

lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices

AskAlice/home-automation-pcbs
Daily Kimi-generated home automation PCB designs with KiCad sources, 3D models, and rendered documentation

ckh7488/iot
각 폴더에는 .kicadsch, ERC 보고서, 검토용 PDF/PNG와 설계감사용 CSV BOM이 있다. 이 CSV는 JLC에 바로 올리는 생산 BOM이 아니다. 실제 PCB 배치가 끝난 뒤 JLC 형식 BOM과 CPL(좌표·회전·면)을 별도로 생성해야 한다.

lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices

paulmikael02/ESP32-BLDC-Motor-Controller
ESP32-based BLDC motor controller built with ESP-IDF, utilizing Hall sensors and the hardware MCPWM peripheral.

AskAlice/home-automation-pcbs
Daily Kimi-generated home automation PCB designs with KiCad sources, 3D models, and rendered documentation

AskAlice/home-automation-pcbs
Daily Kimi-generated home automation PCB designs with KiCad sources, 3D models, and rendered documentation

AskAlice/home-automation-pcbs
Daily Kimi-generated home automation PCB designs with KiCad sources, 3D models, and rendered documentation

AskAlice/home-automation-pcbs
Daily Kimi-generated home automation PCB designs with KiCad sources, 3D models, and rendered documentation

MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.

pushtiujeniya/esp32-c6-environmental-logger
This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.


Batterhead221/esp32-c6_microcontroller
custom esp32-c6 development board with rgb status led, user input, i2c expansion, oled support, and onboard environmental sensing.

LayerDynamics/KiClaude
Browser-native, AI-native, KiCad-compatible EDA — Claude Code's hardware counterpart.


thelad-dev/ESP32-USB-PWM-Board
ESP32-Firmware & Hardware für 4-Pin-PWM-Lüfter: Duty-Steuerung, Tacho/RPM, serielle CLI.

tomjtoth/ESP32-C6-USB-switch
I found 1x type-A to 3x type-A wireless USB switches on AliExpress.

xmyoot/esp32c6-epaper-calendar
USB-powered XIAO ESP32C6 carrier for a bare 7.5-inch e-paper panel: KiCad hardware, firmware, fabrication files, and review evidence. Prototype testing pending.

AntoG00/ESP32-C6-CO2-Monitor
Low-power CO2, temperature and humidity monitor using ESP32-C6 and E-Paper display.

Chockalingam-M/PCB-Designing
🚀 Designed and developed this PCB as a demonstration of my skills in hardware design and precision layout. From component placement to trace optimization, every part of this board reflects my commitment to clean…