
C6-40-Flash test
martinberlin/H-C6-ulp
ESP32C6 in a very low power design with a 24 pin FPC for a small SPI Epaper

ESP32C6 in a very low power design with a 24 pin FPC for a small SPI Epaper
H C6-ulp is an open-source printed circuit board by martinberlin, from the martinberlin/H-C6-ulp repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 53.5 × 33 mm with 82 parts on 76 nets, routed with 696 tracks and 113 vias.
It is built around the ESP32-C6FH4, SGM6029CYG/TR and K2-1806SQ-A2DW-04, with the TP4057-42-SOT26-R, MBR0530 and 2450AT42E0100E among its other parts. Its parts include 23 capacitors, 19 resistors, 6 ICs, 6 diodes and 5 connectors. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
This PCB design is based on C6 design guidelines and uses the Buck converter schematic of Seeed XIAO C6 SGM6029
The SGM6029 family is a low voltage, efficient and miniature synchronous Buck converter with ultra-low quiescent current. Operating at high switching frequency (4.0MHz, TYP), miniature inductors and capacitors can be used to achieve minimal solution size.
IO Description
0 EPD_MOSI
1 EPD_CLK
2 EPD_CS
3 EPD_DC
4 EPD_BSY
5 EPD_RST
6 SCL --> I2C ↘
7 SDA --> I2C connected to RV2032 RTC
IO Description
19 Left SW1
20 Right SW2
18 Right SW3
Last version 1.1:

Failed release v1.0: We forgot to add SPI flash. Oh yeah, you won't flash it!

| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R9, R11, R13, R14, R15, R20 |
| 6 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C11, C13, C14, C15 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R16, R17, R18, R19 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9, C10, C12 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 22pF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C23 |
| 3 | K2-1806SQ-A2DW-04 | footprints:KEY-SMD_K2-1806SQ-A3DW-04 | U4, U5, U6 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 10 uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R7, R10 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C19 |
| 2 | L | Inductor_SMD:L_0603_1608Metric | L1, L4 |
| 2 | SW_Push_Dual | footprints:switch_SKSVCCE010 | SW1, SW2 |
| 1 | 0.47 uH | footprints:IND-SMD_L2.5-W2.0_SPH252012 | L2 |
| 1 | 0.47R | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 0Ω | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10 K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 10uH | footprints:SWPA4030S1R0NT | L3 |
| 1 | 1N5817 | Diode_SMD:D_SOD-123 | D5 |
| 1 | 21 | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | 22 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | 23 | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | 2450AT42E0100E | footprints:2450AT42E0100E-ANT | ANT1 |
| 1 | 249k 1% | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 2K2 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 4.7uF 50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | AFC24-S24FIC-00 | footprints:AFC24-S24FIC-00 | J2 |
| 1 | Crystal 40 Mhz 10ppm | footprints:Crystal_ECS-40Mhz_ECS | X1 |
| 1 | ESP32-C6FH4 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U1 |
| 1 | GRE | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | PREVGL | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | RV-3032-C7 | footprints:RV3032C7 | Y1 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | SGM6029CYG/TR | footprints:SGM6029_WLCSP-6 | U2 |
| 1 | SM02B-SRSS-TB(LF)(SN) | footprints:SM02BSRSSTBLFSN | J3 |
| 1 | SM04B-SRSS-TB_LF__SN_ | footprints:QWIIC_SM04B-SRSS-TB_LFSN_ | J4 |
| 1 | Si1308 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | Si2301CDS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | TP4057-42-SOT26-R | footprints:TP4057-42-SOT26-R | U3 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | USB_C_Receptacle_USB2.0 | footprints:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | VCOM | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | VGH | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | superCAP | footprints:superCAP-XH414HG | C24 |

martinberlin/H-C6-ulp
ESP32C6 in a very low power design with a 24 pin FPC for a small SPI Epaper

martinberlin/H-C3-029-eink
This is a joint project between Larry Bank and Fasani Corp with the purpouse to make an easy and unexpensive nRF52 BLE badge with a SPI 2.9", a QWIIC connector, and on board RTC

martinberlin/Sharp-LV
This KiCad board aims to be a low consumption driver for SHARP LCDs w/optional touch. MCU: Nordic RF52 (not tested) | ESP32S3 buy one in Tindie before sending to production


MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.

martinberlin/bistable-smart-switch
An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)

Uspizig/WifiWallSwitch
A WallSwitch with a clever EINK Display that measures your Air Quality, measures Temperature, detects movement, measures Light Conditions... and many more.


vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.
It measures 53.5 × 33 mm and has 4 copper layers, 1.6 mm thick.
82 parts, built around the ESP32-C6FH4, SGM6029CYG/TR, K2-1806SQ-A2DW-04 and TP4057-42-SOT26-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the martinberlin/H-C6-ulp repository on GitHub, at the commit this page was made from: the board is H-C6-ulp.kicad_pcb and its schematic C6-40-Flash-test/C6-40-Flash-test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).