2 layers79.6 × 36.3 mm
WiRSa
nullvalue0/WiRSa
Wifi RS232 Serial Modem adapter with SD file transfer, SLIP & PPP features
27 parts48MIT
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers83.8 × 91.4 mm
HIDControls
profdc9/HIDPanel
A customizable HID USB device with buttons, encoders, sliders, potentiometers, etc.
65 parts48 - 2 layers100 × 100 mm
Panel
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
342 parts48 - 2 layers102 × 71 mm
REF1329 Altera
RWeick/REF1329-N64-Gameshark-Clone
This implements the original LZ9FC17 GAL on an Altera EPM240. It fully supports all functionality to include: parallel port, 7 segment display, and the GS button
41 parts48GPL-3.0 - 2 layers134 × 91 mm
- 2 layers79 × 38.7 mm
- 2 layers49.9 × 21.4 mm
- 2 layers110 × 117 mm
Add sub
tmarhguy/alu
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
200 parts48MIT - 2 layers85 × 56 mm
Basicengine
uli/basicengine-pcb
Schematics and PCB layout for the BASIC Engine home computer
115 parts48 - 2 layers
- 2 layers80 × 50 mm
- 2 layers335 × 125 mm
- 2 layers72 × 93.2 mm
SD-10005v
aotta/SD-1000
Sega flash multicart for SC-3000, SG-1000 and Mark III based on Pico Clone
6 parts47GPL-3.0 - 2 layers30 × 30 mm
- 2 layers89.6 × 60.1 mm
- 2 layers
- 2 layers310 × 229.8 mm
- 4 layers36 × 64 mm
- 2 layers71.2 × 38.1 mm
- 2 layers51 × 33.1 mm
V0 miniAB pancake board
christophmuellerorg/voron_0_pancake_board
The pancake board is a passive tool board mounting on the back of the MiniAB pancake stepper of the Voron 0.1. The board solidly mounts with 20mm brass standoffs to the back of the mini after burner mounting screws and…
13 parts47CC-BY-SA-4.0 - 2 layers48.8 × 50.5 mm
- 2 layers254.9 × 62.2 mm
- 4 layers155 × 75 mm
GTI V5
fotherja/Grid_Tie_Inverter_V5
Please refer to my site ( www.jamesfotherby.com ) where this project is being documented in detail
165 parts47MIT - 2 layers48.3 × 27.9 mm
C06
galopago/misistemita
Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup.
44 parts47MIT