Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers40.1 × 19.8 mmALTIMET02, the printed circuit board in 3D

    ALTIMET02

    mlab-modules/ALTIMET02

    High-accuracy barometric pressure and temperature sensing module with MS561101BA03.

    17 parts2GPL-3.0
  • 2 layers19.8 × 30 mmFRAM01, the printed circuit board in 3D

    FRAM01

    mlab-modules/FRAM01

    8 Mbit FRAM (CY15B108QN) fast data write, low power consumption, and high radiation resistance data storage

    12 parts2GPL-3.0
  • 2 layers40.1 × 30 mmLIGHTNING01, the printed circuit board in 3D

    LIGHTNING01

    mlab-modules/LIGHTNING01

    Lightning sensor module based on AS3935 Franklin Lightning Sensor IO. Sensor can be connected via I2C or SPI bus.

    33 parts2
  • 2 layers80.8 × 60.5 mmLION2CELL01, the printed circuit board in 3D

    LION2CELL01

    mlab-modules/LION2CELL01

    Dual-cell Li-Ion Battery management system.

    100 parts2GPL-3.0
  • 2 layers50.3 × 30 mmPCRD02, the printed circuit board in 3D

    PCRD02

    mlab-modules/PCRD02

    Silicon PIN diode cosmic radiation detector

    40 parts2GPL-3.0
  • 2 layers60.5 × 40.1 mmSIPM01, the printed circuit board in 3D

    SIPM01

    mlab-modules/SIPM01

    Silicon photomultiplier (SiPM) analog front end

    37 parts2
  • 2 layers40.1 × 40.1 mmSOLARMINI01B, the printed circuit board in 3D

    SOLARMINI01B

    mlab-modules/SOLARMINI01

    Small low-power MPPT module for photovoltaic cells.

    28 parts2GPL-3.0
  • 4 layers80.8 × 80.8 mmUsbhub01a, the printed circuit board in 3D

    Usbhub01a

    mlab-modules/USBHUB01

    Four port USB 3.0 HUB configurable via I2C

    145 parts2
  • 4 layers99.4 × 89.3 mmDactyl Shield, the printed circuit board in 3D

    Dactyl Shield

    mmccoyd/hillside_dactyl_shield

    MCU breakout boards to create a small Dactyl keyboard with battery, display, USB-C split, and LED underglow.

    130 parts2CERN-OHL-W-2.0
  • 2 layers53.3 × 17.8 mmPmod, the printed circuit board in 3D

    Pmod

    mmicko/pmod

    3 parts2CC0-1.0
  • 2 layers70 × 110 mmNucleo144 DSP, the printed circuit board in 3D

    Nucleo144 DSP

    mnemocron/Nucleo-DSP-Shield

    Audio DSP Shield for STM32 Nucleo-144 Boards (H723zg) based on the TLV320 CODEC

    70 parts2GPL-3.0
  • 4 layers53.5 × 25 mmSerdes rf hdmi, the printed circuit board in 3D

    Serdes rf hdmi

    mobilinkd/serdes-rf-hdmi

    HDMI test fixture for LVDS to single-ended SMA for RF testing.

    30 parts2
  • 2 layers48.3 × 53.3 mmHUB75 Driver, the printed circuit board in 3D

    HUB75 Driver

    ModischFabrications/HUB75_Driver_PCB

    This is the PCB for my custom HUB75 RGB Panel Display.

    16 parts2CERN-OHL-S-2.0
  • 4 layers100 × 95 mmVCF1 rev1, the printed circuit board in 3D

    VCF1 rev1

    ModularMayhem/mmm

    A eurorack filter created in collaboration by the modular mayhem DIY folks

    201 parts2
  • 2 layers63.6 × 42.5 mmMacroboard v2, the printed circuit board in 3D

    Macroboard v2

    MoeezAnwar/Macroboard-v2

    4-Key Macroboard V2 with Rotary Encoder | Customizable via QMK | Includes PCB, BOM, 3D Model & Gerber Files

    15 parts2MIT
  • 4 layers57 × 54 mmPojet V NOM KiCAD, the printed circuit board in 3D

    Pojet V NOM KiCAD

    MohamedBenabdelhadi/2425_ESE_Projet_V-NOM

    Mohamed Benabdelhadi_Nouhaila Faris_Oliver Belliard_Valerian Priou

    78 parts2
  • 2 layers53.6 × 68.9 mmMECHX Pet Feeder, the printed circuit board in 3D

    MECHX Pet Feeder

    MohamedRadwan180/Automatic-Pet-Feeder

    This project is to build an Automatic Pet feeder and Entertainment DIY device as part of the Mechantronics Course as part of the Bruface masters at VUB and ULB universities.

    13 parts2MIT
  • 2 layers162.3 × 227.8 mmSymm60HE wklbs2-Panel, the printed circuit board in 3D

    Symm60HE wklbs2-Panel

    Mokeded/Symm60HE

    Symmetrical Hall effect Alice keyboard based off of the Doe

    406 parts2GPL-3.0
  • 2 layers52 × 29 mmEsp32 wroom mudule, the printed circuit board in 3D

    Esp32 wroom mudule

    moksh-pcb-design/ESP32-WROOM-Development-Board

    Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.

    26 parts2
  • 4 layers30 × 42 mmM2-ice40, the printed circuit board in 3D

    M2-ice40

    mokus0/m2-ice40

    A M.2 3042 B-key card with an ICE40 FPGA. Currently intended for a specific application, but could easily be used for more general purposes.

    146 parts2
  • 4 layers84 × 78 mmWaferspace main pcb, the printed circuit board in 3D

    Waferspace main pcb

    mole99/waferspace-main-pcb

    Main PCB for wafer.space FABulous FPGA

    276 parts2Apache-2.0
  • 2 layers53.9 × 85.5 mmMeetup badge 2switch, the printed circuit board in 3D

    Meetup badge 2switch

    MoltenKhor/Meetup-Badge

    BusinessCard-sized FR4 badge for your keyboard meetup.

    6 parts2GPL-3.0
  • 2 layers64.5 × 120.5 mmX de link, the printed circuit board in 3D

    X de link

    Monacrylic/Pinscope-benchmark-circuits

    This repository contains a suite of sample KiCad circuits used as benchmarks for Pinscope.

    122 parts2
  • 2 layers116.8 × 25.4 mmGPIO power switch, the printed circuit board in 3D

    GPIO power switch

    moonbuggy/GPIO-power-switch

    A low-side MOSFET switch controlled by a button and GPIO signals

    44 parts2