
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

BusinessCard-sized FR4 badge for your keyboard meetup.
Meetup badge 2switch is an open-source printed circuit board by MoltenKhor, from the MoltenKhor/Meetup-Badge repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53.9 × 85.5 mm with 6 parts on 22 nets, routed with 34 tracks and 0 vias.
Its parts include 2 switches, 1 IC and 1 connector. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
An FR4 credit card sized badge that you can use to make your event or meetup more memorable. This repo contains a version with solder pads and traces for a pro-micro controller and 2 MX switches but also a totally clean version if you don't want any component on it.
Photos, instructions will be added soon.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | MX_Switch:MXOnly-1U-NoLED | SW1, SW3 |
| 1 | |||
| 1 | Lily58-cache:OLED | Keebio-Parts:I2C_Breakout | J1 |
| 1 | Lily58-cache:ProMicro_2 | Keebio-Parts:ArduinoProMicro-BackSide | U1 |
| 1 | SW_Push | Diode_THT:D_A-405_P2.54mm_Vertical_KathodeUp | RESET1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 53.9 × 85.5 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MoltenKhor/Meetup-Badge repository on GitHub, at the commit this page was made from: the board is meetup_badge_2switch/meetup_badge_2switch.kicad_pcb and its schematic meetup_badge_2switch/meetup_badge_2switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).