Skip to the content
2 layers48.3 × 53.3 mmHUB75 Driver, the printed circuit board in 3D

This is the PCB for my custom HUB75 RGB Panel Display.

Size
48.3 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
22
Pads
67
Tracks, vias
40, 0
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 Dec 2021
Updated
16 Jan 2023

Overview

HUB75 Driver is an open-source printed circuit board by ModischFabrications, from the ModischFabrications/HUB75_Driver_PCB repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 48.3 × 53.3 mm with 16 parts on 22 nets, routed with 40 tracks and 0 vias.

Its parts include 2 capacitors, 2 inductors, 1 IC, 1 diode and 1 fuse. It belongs with the ESP32 boards of this library.

README

README.md

KiCad Exports

HUB75_Driver_PCB

This is the PCB for my custom HUB75 RGB Panel Display.

I bought this 64x32 panel and this ESP32 (ESP32-CH9102X) closely researching specifications, costing ~30€ in sum. Others will probably work too, no guarantees either way.

Open like regular in KiCad. Look into the docs zip under Actions/KiCad Exports to see renderings.

This schematic can be soldered manually onto a perfboard, but feel free to order a PCB instead.

Use a 5V power supply with 10W or more! Never connect USB Power and Matrix power together, make sure to remove the jumper when using the USB connector. Powering the Matrix via USB, without the terminals, is possible, but definitely not recommended, the devboard can't handle it.

Max current is ~2A, typical ~0.7A, idle (without output) is still ~0.06A, split between devboard and RGB controllers. Being wireless it nice, but usually, especially in this case, not worth the effort for protoypes. While technically possible, the power draw will reduce battery runtime to less than a day.

Feel free to add external solutions though, should be easy to cram a 18650 USP board into the case.

Decisions

Size and exact positioning is determined by the backing struts of my panel.

Using a 30 Pin Devboard keeps everything compact, but means that IO options are limited. Many pins of the ESP32 have limited usability or are otherwise reserved, check pinouts for reference. This board contains 2 (/3) Touch Inputs for future expansion, a full I2C/SPI/... wasn't included due to size constraints.

Electrical

Short-circuit-resistance of the power leads is archieved using a polyfuse. Resistance of the inputs is build-in, as they are high impedance, but the outputs are at risk.

Reverse polarity protection is given through D1, which will trigger the fuse. Sure, it's not perfect, but it's simple.

Introducing series resistances into every single connection could have made it safer, but I can't be arsed at the moment. Active-Low or High doesn't really matter either, a cross between adjacent leads would result in one overloading regardless. Feel free to insert ~300 ohm everywhere if you want to be safe.

References

To be honest, they are virtually identical solutions with just minor differences. Choose according to your needs.

Parts

16
QtyValueFootprintReferences
3Conn_01x01_MaleConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_HorizontalTOUCH_1, TOUCH_2, TOUCH_3
2MF_LogoMF custom:mf_logo_10mmL1, L2
11000uFw_capacitors:CP_10x20mm_horC1
1100nFCapacitor_SMD:C_0603_1608MetricC2
110uFCapacitor_SMD:C_0603_1608MetricC_PROG_1
15AFuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolderF1
1Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ_VCC_BREAKER_1
1Conn_02x08_Row_Letter_FirstConnector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_VerticalJ_HUB75_1
1ESP32_DevKit_V1_DOITESP32_DevKit_V1_DOIT:esp32_devkit_v1_doitU1
1Logo_Open_Hardware_SmallSymbol:OSHW-Logo2_7.3x6mm_SilkScreenLOGO1
1POLARITY_PROTECTIONDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ_IN_1
1Screw_Terminal_01x04TerminalBlock:TerminalBlock_bornier-4_P5.08mmJ_OUT_1

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the HUB75 Driver PCB?

It measures 48.3 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HUB75 Driver use?

16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HUB75 Driver KiCad files?

From the ModischFabrications/HUB75_Driver_PCB repository on GitHub, at the commit this page was made from: the board is PCB/HUB75_Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the HUB75 Driver design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).