Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers50.8 × 22.9 mmFeatherWing, the printed circuit board in 3D

    FeatherWing

    jenschr/FeatherWing

    A bare Feather Wing project for Kicad

    6 parts8MIT
  • 2 layers165.1 × 110 mmRDL revE4, the printed circuit board in 3D

    RDL revE4

    jericholab/rdl

    Resistance Data Logger

    120 parts8GPL-2.0
  • 2 layers36.8 × 69.9 mmXt60board, the printed circuit board in 3D

    Xt60board

    jesseaster/xt60board

    This is a XT60 Board with 12 connectors designed using KiCad.

    13 parts8
  • 2 layers53.3 × 85.1 mmRom cart, the printed circuit board in 3D

    Rom cart

    JiggleSoft/atari2600_cart_prog

    Atari 2600 Budget ROM Cartridge, Budget ROM/RAM/Bank Switching Cartridge, Budget Programmer.

    13 parts8
  • 2 layers66.3 × 57.7 mm6847PiVGA, the printed circuit board in 3D

    6847PiVGA

    jimbro1000/6847Pi

    A recreation of the Motorola 6847P using a modern microcontroller

    51 parts8GPL-3.0
  • 2 layers253 × 169.1 mmDragon32, the printed circuit board in 3D

    Dragon32

    jimbro1000/Dragon32Issue2

    Recreation of early Dragon 32 mainboard

    209 parts8MIT
  • 2 layers101.9 × 285.8 mmHhkb, the printed circuit board in 3D

    Hhkb

    jinhwanlazy/hhkb-pcb

    Yet another PCB for HHKB copy.

    136 parts8
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers81.3 × 99.7 mmSTM32F407VET6, the printed circuit board in 3D

    STM32F407VET6

    jmz52/Hardware

    First public release. Corrected version of prototype board.

    103 parts8CC-BY-4.0
  • 4 layers165 × 50 mmHUB0402, the printed circuit board in 3D

    HUB0402

    jobitjoseph/All-in-one-USB-3.1-Hub-for-EE-Engineers

    311 parts8
  • 2 layers155 × 288 mmMC8P Midi Controller, the printed circuit board in 3D

    MC8P Midi Controller

    joebmz98/MC8P-Midi-Controller

    8 Potentiometer Standalone MIDI Controller based on the Teensy 4.0.

    61 parts8MIT
  • 2 layers135.8 × 128.4 mmMoog Filter, the printed circuit board in 3D

    Moog Filter

    jojo-monk/Yusynth-MiniMoog-Filter

    Eurorack adaptation

    78 parts8
  • 2 layers13 × 12.7 mmADcmXL3021 adapter, the printed circuit board in 3D

    ADcmXL3021 adapter

    jolau/VibrationDAQ

    Data Acquisition (DAQ) of the Analog Devices ADcmXL3021 vibration sensor.

    5 parts8MPL-2.0
  • 2 layers37.5 × 16 mmSk-1-octave, the printed circuit board in 3D

    Sk-1-octave

    jonaspaulkarlsson/sk-1-octave

    Octave switch for the Casio SK-1 keyboard

    20 parts8CC0-1.0
  • 4 layers55 × 35 mmCarrier, the printed circuit board in 3D

    Carrier

    jonsole/toyotune

    Daughter-board for reprogramming 1990's Toyota ECUs

    30 parts8GPL-3.0
  • 4 layers42 × 30 mmSx1238RfModule, the printed circuit board in 3D

    Sx1238RfModule

    jonthomasson/sx1238-500mw-rf-transceiver

    SX1238 915MHz 500mW RF Transceiver Module

    41 parts8
  • 4 layers133.9 × 165.1 mmMain VCO board, the printed circuit board in 3D

    Main VCO board

    JordanAceto/micro_ox

    Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.

    295 parts8CC-BY-4.0
  • 2 layersPerfboardPrototype, the printed circuit board in 3D

    PerfboardPrototype

    jostsalathe/focan-uart

    Reverse engineering effort for the UART protocol used between Focan E-Scooter/-Bike displays (GZ3 is the actual test subject) and motor controllers..

    24 parts8
  • 2 layers52 × 18 mmESP32-S3-Stick, the printed circuit board in 3D

    ESP32-S3-Stick

    JosueAGtz/ESP32-S3-Stick

    ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides…

    58 parts8
  • 2 layers17 × 19 mm328RFStamp, the printed circuit board in 3D

    328RFStamp

    jp112sdl/328RFStamp

    328RFStamp - Miniplatine für CC1101 und 328P

    20 parts8
  • 2 layers25.3 × 25.3 mmLM49270-PIC, the printed circuit board in 3D

    LM49270-PIC

    JSnowden33/LM49270-PIC

    Method for controlling LM49270 with a PIC microcontroller.

    47 parts8
  • 2 layers57.9 × 65.5 mmPico player pcb, the printed circuit board in 3D

    Pico player pcb

    jstanley0/pico-player

    Music player for Raspberry Pi Pico and a pair of SN76489s

    23 parts8MIT