

Moog Filter
Eurorack adaptation
- Size
- 135.8 × 128.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 66
- Pads
- 231
- Tracks, vias
- 449, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 May 2023
- Updated
- 29 May 2023
Overview
Moog Filter is an open-source printed circuit board by jojo-monk, from the jojo-monk/Yusynth-MiniMoog-Filter repository on GitHub. It is a 2-layer board of 135.8 × 128.4 mm with 78 parts on 66 nets, routed with 449 tracks and 4 vias.
It is built around the TL072, BC547 and BC557. Its parts include 34 resistors, 14 capacitors, 9 connectors, 7 transistors and 3 ICs.
Main components
3TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC557
TO-921 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
README
README.mdYusynth-MiniMoog-Filter
Adaptation du Yusynth MiniMoog Filter au format Eurorack
testé et fonctionnel.
petit défaut esthetique : sérigraphie un peu trop petite et trop proche des boutons.
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | BC547 | Package_TO_SOT_THT:TO-92_HandSolder | Q2, Q3, Q4, Q5, Q6, Q7 |
| 5 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R10, R29, R30, R32, R33 |
| 4 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R6, R7, R12 |
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11, R20, R21, R34 |
| 4 | 47nF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C3, C4, C5, C6 |
| 3 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C10, C11 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R25, R26 |
| 2 | 120K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R24, R31 |
| 2 | 220K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R17, R22 |
| 2 | 220nF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C8, C9 |
| 2 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C13, C14 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4, R14 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8, R9 |
| 2 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R15, R16 |
| 2 | 56K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R23 |
| 2 | CA3046 | Package_DIP:DIP-14_W7.62mm_LongPads | U2, U3 |
| 2 | INPUT LEVEL 50K Log | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV5, RV6 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 1.8K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 100nF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C12 |
| 1 | 100pF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C1 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 150K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R28 |
| 1 | 180 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R19 |
| 1 | 1K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV3 |
| 1 | 22 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R18 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R13 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C7 |
| 1 | 500 | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R27 |
| 1 | BC557 | Package_TO_SOT_THT:TO-92_HandSolder | Q1 |
| 1 | CV1 | Audio_Jack:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J5 |
| 1 | CV2 | Audio_Jack:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J6 |
| 1 | CV3 | Audio_Jack:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J7 |
| 1 | Conn_01x07_Female | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Ctrl LEVEL 50K Lin | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV7 |
| 1 | EURO_PWR_2x5 | eurorack:Eurorack_power_header | J2 |
| 1 | Emphasis 50K antilog | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV8 |
| 1 | Freq 10K Lin | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV4 |
| 1 | IN1 | Audio_Jack:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J3 |
| 1 | IN2 | Audio_Jack:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J4 |
| 1 | LOGO | Logos:Gaston Music-big | G*** |
| 1 | OUT | Audio_Jack:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J9 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_LongPads | U1 |
Similar boards
- 2 layers30.5 × 99.1 mm

- 2 layers167.8 × 146.7 mm

- 4 layers140 × 136 mm

Vinyl adc rev d
MadsRudolph/vinyl-adc
Discrete 3rd-order delta-sigma stereo audio ADC, built from op-amps and logic gates: a four-layer Raspberry Pi HAT made by PCBWay, with KiCad files, SPICE simulations and measurements
184 parts1 - 2 layers241.3 × 190.5 mm

- 2 layers38.1 × 101.6 mm

- 2 layers78 × 108 mm

Corona mainBoard
coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.
88 parts33 - 2 layers94 × 89 mm

- 2 layers110.5 × 54.1 mm

Questions
How big is the Moog Filter PCB?
It measures 135.8 × 128.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Moog Filter use?
78 parts, built around the TL072, BC547 and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Moog Filter KiCad files?
From the jojo-monk/Yusynth-MiniMoog-Filter repository on GitHub, at the commit this page was made from: the board is Moog-Filter/Moog-Filter.kicad_pcb and its schematic Moog-Filter/Moog-Filter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Moog Filter design in my own project?
Its repository states no licence, so its author keeps all rights: ask jojo-monk before reusing the design.