Skip to the content
4 layers75 × 95 mmGalvo controller, the printed circuit board in 3D

Galvo controller

jeffkub/esp32-galvo8
Size
75 × 95 mm
Copper layers
4
Thickness
1.6 mm
Parts
136
Nets
116
Pads
458
Tracks, vias
864, 186
Pours
7
Routed
Yes
KiCad
KiCad 4
Created
8 Mar 2018
Updated
18 Mar 2018

Overview

Galvo controller is an open-source printed circuit board by jeffkub, from the jeffkub/esp32-galvo repository on GitHub, published under the MIT licence. It is a 4-layer board of 75 × 95 mm with 136 parts on 116 nets, routed with 864 tracks and 186 vias.

It is built around the CP2104EK, ESP-WROOM-32D and SN74LV1T34DBV, with the LME49724MR, OPA2134UA and PCM3060PW among its other parts. Its parts include 56 capacitors, 44 resistors, 10 ICs, 8 connectors and 5 diodes.

Main components

10

README

README.md

esp32-galvo

Laser galvo controller board using the ESP32.

alt text

Parts

136
QtyValueFootprintReferences
2210kResistors_SMD:R_0603R3, R10, R13, R14, R15, R16, R19, R20, R21, R22, R23, R24, R31, R32, R33, R34 +6
1910uCapacitors_SMD:C_0805C4, C13, C19, C22, C24, C27, C29, C30, C32, C43, C44, C45, C46, C47, C51, C52 +3
170.1uCapacitors_SMD:C_0603C3, C11, C15, C16, C23, C28, C31, C33, C34, C41, C42, C48, C49, C50, C54, C55 +1
6330pCapacitors_SMD:C_0603C35, C36, C37, C38, C39, C40
51kResistors_SMD:R_0603R1, R11, R12, R25, R26
51uCapacitors_SMD:C_0805C1, C2, C5, C6, C18
40Resistors_SMD:R_0603R39, R40, R41, R42
422uCapacitors_SMD:C_1206C10, C12, C20, C21
48.06kResistors_SMD:R_0603R27, R28, R29, R30
3Conn_01x03Connectors_JST:JST_XH_B03B-XH-A_03x2.50mm_StraightJ2, J7, J8
2100uCapacitors_SMD:CP_Elec_6.3x7.7C25, C26
210nCapacitors_SMD:C_0603C14, C17
220kResistors_SMD:R_0603R37, R38
222.1kResistors_SMD:R_0603R9, R18
247kResistors_SMD:R_0603R43, R44
2BAT54STO_SOT_Packages_SMD:SOT-23D4, D5
2Jumper_NO_SmallPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJP1, JP2
2LME49724Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mmU9, U10
2MMBT2222TO_SOT_Packages_SMD:SOT-23Q1, Q2
1124kResistors_SMD:R_0603R8
12.2ufootprint:CLF7045-DL2
13.3ufootprint:CLF7045-DL1
1390kResistors_SMD:R_0603R2
14.7uCapacitors_SMD:C_0805C9
173.2kResistors_SMD:R_0603R17
1CP2104Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mmU3
1Conn_01x03Connectors_Molex:Molex_KK-6410-03_03x2.54mm_StraightJ3
1ESP-WROOM-32Dfootprint:ESP32-WROOMU4
1GRNDiodes_SMD:D_0603D3
1JS1400BFQfootprint:JS1400BFQSW1
1Micro_SD_Card_Detfootprint:503182-1853J4
1NCP1117LPTO_SOT_Packages_SMD:SOT-223-3_TabPin2U7
1OPA2134Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU8
1ORGDiodes_SMD:D_0603D1
1PCM3060Housings_SSOP:TSSOP-28_4.4x9.7mm_Pitch0.65mmU6
1REDDiodes_SMD:D_0603D2
1Redfootprint:RCJ-01xJ5
1SN74LV1T34TO_SOT_Packages_SMD:SOT-23-5U1
1TPS54295PWPHousings_SSOP:HTSSOP-16-1EP_4.4x5mm_Pitch0.65mm_ThermalViasU5
1UG-2832HSWEG02footprint:UG-2832HSWEG02U2
1USB_OTGfootprint:10118192J1
1Whitefootprint:RCJ-01xJ6

The 130 most common of 136 parts.

Similar boards

  • 2 layers106 × 80 mmDisplayboard, the printed circuit board in 3D

    Displayboard

    PyroVision-ThermalCam/Displayboard

    Displayboard for the PyroVision thermal camera.

    27 parts4GPL-3.0
  • 2 layers46 × 124.8 mmLazy Mouse, the printed circuit board in 3D

    Lazy Mouse

    WeBuildAnything/Wireless-Media-Control-Mouse

    The IMU sensor uses the MPU6050 library by Electronic Cats.

    62 parts
  • 4 layers100 × 100 mmIdeal groove box, the printed circuit board in 3D

    Ideal groove box

    centrevillage/ideal-groove-box

    理想のグルーブボックスは俺たちの手で作る

    180 parts10MIT
  • 4 layers40 × 68 mmKit Brainboard, the printed circuit board in 3D

    Kit Brainboard

    4ms/mp153-brainboard-pcb

    PCB for STM32MP153 brainboard

    248 parts
  • 2 layers119.4 × 109.2 mmSpace, the printed circuit board in 3D

    Space

    kitspace-test-repos/kicad6-file-collection

    174 partsMIT
  • 2 layers97.1 × 97.1 mmESP32 IMU Module V1.1, the printed circuit board in 3D

    ESP32 IMU Module V1.1

    shaun-lloyd/dev-ardupilot-obal

    ArduPi is an open hardware Raspberry Pi hat to run Ardupilot.

    87 parts2CC0-1.0
  • 2 layers50 × 48 mmDled esp32-controller, the printed circuit board in 3D

    Dled esp32-controller

    CalinRadoni/pax-DLED

    Efficiency, hardware control for digital LEDs and Wi-Fi communications - these are just some of the caracteristics of this controller.

    40 partsGPL-3.0

Questions

How big is the Galvo controller PCB?

It measures 75 × 95 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Galvo controller use?

136 parts, built around the CP2104EK, ESP-WROOM-32D, SN74LV1T34DBV and LME49724MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Galvo controller KiCad files?

From the jeffkub/esp32-galvo repository on GitHub, at the commit this page was made from: the board is hardware/galvo_controller/galvo_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Galvo controller design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).