2 layers74 × 83.8 mm
PCB Board
RunningJoke/reactionButton
ReactPod: ESP32-C3 reaction buzzers – firmware, Config App (PWA), tools, hardware
70 parts
Open-source KiCad boards
159 match “SL-RU”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers36 × 122 mm
ESP32 Soil Moisture Sensor
rup2014/Soil-Moisture-Sensor-PCB-Schematic
This project contains the KiCad schematic and PCB layout for a soil moisture reader built around the ESP32-WROVER module.
9 parts - 2 layers100 × 100 mm
- 2 layers160.5 × 100.2 mm
8080 Board
sladek/SBC_8080_ECB
This is my attempt to build a single-board microcomputer based on the Intel 8080 CPU. It contains the following features:
112 parts - 2 layers151.4 × 45.7 mm
CNC Boosterpack
speters/CNC_BoosterWing
CNC breakout board for the TM4C1294CL Launchpad running grbHAL
159 parts - 2 layers249.7 × 99.4 mm
Kicadproj
steven-na/saria
An rp2040 based, wired, split-ergo, mechanical keyboard. Running on QMK firmware
148 parts - 2 layers120 × 90 mm
Garage controller
TheKeno/Garage_Opener_Logicer
A barebones board for GarageOpenerLogicerR6: an ATmega328P on a 16 MHz crystal, powered from USB-C, with connectors for everything in the garage. The chip is pinned out exactly like an Uno, so the sketch runs unchanged.
68 parts - 4 layers85 × 25 mm
- 4 layers85 × 67 mm
- 2 layers346.1 × 116.8 mm
Kbd classic
osiweb/unified_retro_keyboard
Project to provide keyboard replacements for various classic computers, as well as classic ASCII keyboard
143 parts122 - 4 layers125.7 × 76.5 mm
UGC Main
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
128 parts62 - 2 layers100 × 60 mm
Axis V2 HV
Meigs2/Axis
An open source espresso machine controller inspired by the Gaggiuinio Project
43 parts8 - 4 layers78.7 × 63.5 mm
Hdmi trigger interface
ruffner/MojoV3_HDMI_Interface
FPGA SLI controller with dual HDMI and Basler machine vision camera trigger interface PCB
19 parts4 - 2 layers92 × 44 mm
- 4 layers76 × 100 mm
Power hub
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
181 parts - 2 layers100 × 120 mm
Micromouse pcb
MukeshSethy/micromouse-runner
This is my repo for the first version of full size micromouse development.
135 parts - 2 layers100 × 120 mm
Micromouse pcb simplified
MukeshSethy/micromouse-runner
This is my repo for the first version of full size micromouse development.
103 parts - 2 layers88.4 × 80 mm
LHS Controller PCB
dmcke5/ZenDeck
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
76 parts133CERN-OHL-S-2.0 - 2 layers100.2 × 63.1 mm
Fg99
endlos99/finalgrom99
A cartridge for the TI 99/4A that runs ROM and GROM images from an SD card
34 parts96GPL-3.0 - 2 layers214.6 × 162.6 mm
Scorpion-256-Turbo
romychs/Scorpion256TPlus
Scorpion ZS-256 Turbo+. Russian ZX Spectrum clone. Schematics and PCB.
733 parts52 - 2 layers125.7 × 76.5 mm
UGC Main
HandHeldLegend/HHL-GameCube-Parts
Open repo with 3d GameCube models. STEP files!
28 parts38GPL-3.0 - 4 layers190.8 × 12.1 mm
- 4 layers145.5 × 64 mm
Muffin
JunOllyLi/TX_PCB
NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.
138 parts17 - 2 layers108 × 55 mm
