
UGC Trigger
HandHeldLegend/HHL-GameCube-Parts
Open repo with 3d GameCube models. STEP files!

Open repo with 3d GameCube models. STEP files!
UGC Main is an open-source printed circuit board by HandHeldLegend, from the HandHeldLegend/HHL-GameCube-Parts repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 125.7 × 76.5 mm with 28 parts on 99 nets.
It is built around the TS09-63-25-R-260-SMT-TR and UJ31-CH-G1-SMT-TR. Its parts include 13 switches, 12 connectors and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.
3D Printable GameCube controller parts.
Do whatever you want with the files according to the license. Keep these parts open and available for anyone to use.
Mold them, print them, sell them, we don't care. Just provide attribution and retain the same license for derivatives.
Ergo trigger profiles modelled after work from Mikey with permission provided.
Controller shell is, in large part, modelled using great reference scans provided by Wesk on BitBuilt.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x01_Pin | hhl:YZ72015053P-01 | J5, J6, J7, J8, J9, J10, J11, J12 |
| 4 | SW_Push | hhl:progcc_dpad | SW10, SW11, SW12, SW13 |
| 4 | SW_Push | hhl:progcc_bpad | SW1, SW2, SW3, SW4 |
| 2 | SW_Push | hhl:Z_Switch_Edge_Omron | SW7, SW8 |
| 2 | Slider_GCC-Gamecube_MB | hhl:GCC_Slider | RV1, RV2 |
| 1 | ESP32-PICO-MINI-02 | hhl:MODULE_ESP32-PICO-MINI-02 | U1 |
| 1 | GL18_SW | hhl:GL18 | SW6 |
| 1 | LT | hhl:rumble_pins | J2 |
| 1 | RT | hhl:rumble_pins | J3 |
| 1 | Rumble | hhl:rumble_pins | J1 |
| 1 | SW_Push | hhl:snes_pad | SW5 |
| 1 | TS09-63-25-R-260-SMT | hhl:TS09 | SW9 |
| 1 | UJ31-CH-G1-SMT-TR | hhl:CUI_UJ31-CH-G1-SMT-TR | J4 |

HandHeldLegend/HHL-GameCube-Parts
Open repo with 3d GameCube models. STEP files!

HandHeldLegend/HHL-GameCube-Parts
Open repo with 3d GameCube models. STEP files!

HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .


Sutej2907/PCB_DESIGN_STM_AS5600
STM32 BLUE PILL F103C8 AND MAGNETIC ENCODER AS5600 CHIPS INTEGRATED PCB

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
It measures 125.7 × 76.5 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the TS09-63-25-R-260-SMT-TR and UJ31-CH-G1-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HandHeldLegend/HHL-GameCube-Parts repository on GitHub, at the commit this page was made from: the board is PCB/Main/UGC_Main.kicad_pcb and its schematic PCB/Main/UGC_Main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).