Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers345 × 105.6 mmPov display, the printed circuit board in 3D

    Pov display

    usedhondacivic/ECE-4760-POV-Display

    Persistence of vision display. 30 FPS, full RGB color, and 26" diameter. Updates remotely over WIFI.

    50 parts13
  • 2 layers27.6 × 20.4 mmDay1, the printed circuit board in 3D

    Day1

    vhs/vhs-pcbs

    PCB designs from vhs events

    3 parts13
  • 2 layers17.5 × 19.6 mmGo2 pressure sensor, the printed circuit board in 3D

    Go2 pressure sensor

    VincidaB/go2_pressure_sensor

    An add-on pressure sensor module for the unitree GO2 for foot contact detection

    11 parts13
  • 4 layersMezzanine, the printed circuit board in 3D

    Mezzanine

    wafer-space/chip-on-board-wire-bonded-pcbs

    Wire bonded chip on board PCB designs.

    462 parts13Apache-2.0
  • 2 layers285 × 95.8 mmCcd60, the printed circuit board in 3D

    Ccd60

    westfoxtrot/ccd60

    ccd60 is a generic 60% PCB used for Cable Car Designs keyboard designs.

    163 parts13CC-BY-SA-4.0
  • 4 layers80 × 100 mmController, the printed circuit board in 3D

    Controller

    westonb/cute-qcw

    A compact qcw tesla coil system

    198 parts13
  • 2 layers68 × 34.8 mmClass E, the printed circuit board in 3D

    Class E

    westonb/Plasma-Driver

    40W 40.68MHz Class E RF amplifier using a MRF101AN LDMOS Device

    43 parts13
  • 2 layers85 × 50 mmIo8, the printed circuit board in 3D

    Io8

    whowechina/arcade_pico

    Arcade switch replacement

    61 parts13
  • 2 layers198.1 × 63.5 mmUltim bus, the printed circuit board in 3D

    Ultim bus

    wyolum/ultim8x8

    Ultimate LED panel. 8x8 matrix. APA102 RGB LEDs

    186 parts13
  • 4 layers32 × 39 mmBenqS6-SSD, the printed circuit board in 3D

    BenqS6-SSD

    zephray/BenqS6-SSD

    Replacement SSD for Benq S6

    92 parts13MIT
  • 2 layers190.5 × 121.8 mmGantry PCBv2, the printed circuit board in 3D

    Gantry PCBv2

    4rynv/Eklavya_Gantry

    an attempt to automate screwing out and in of screw holes arranged in a matrix formation

    173 parts12MIT
  • 2 layers108 × 55 mmMacroKeyPad, the printed circuit board in 3D

    MacroKeyPad

    9elements/OSKAR

    Open Source Keyboard Appliance powered by Rust

    28 parts12Apache-2.0
  • 2 layers137.2 × 30.5 mmPanaplex, the printed circuit board in 3D

    Panaplex

    74hc595/Panaplex-Clock

    Code/schematics for a clock using a Panaplex (planar gas discharge) display

    30 parts12BSD-3-Clause
  • 2 layersPcb default, the printed circuit board in 3D

    Pcb default

    74th/74th-kicad-parts

    74thが使うKiCad Parts

    10 parts12CC0-1.0
  • 2 layers82 × 70 mmBasic mxm nvme, the printed circuit board in 3D

    Basic mxm nvme

    a-little-wifi/mxm-nvme

    MXM to NVMe SSD adapter

    27 parts12
  • 2 layers143 × 174.7 mmIntellivision t card replic, the printed circuit board in 3D

    Intellivision t card replic

    abzman/intellivision-t-card

    replica of the t-card development cart for the intellivision that takes standard ROMs

    77 parts12Unlicense
  • 2 layers335 × 250 mmACE Board, the printed circuit board in 3D

    ACE Board

    acwright/6502-ACE

    6502-ACE 8-Bit Retro Computer Project

    205 parts12CERN-OHL-P-2.0
  • 2 layers36.4 × 29.4 mmKicad Smart Watch, the printed circuit board in 3D

    Kicad Smart Watch

    AFLProjects/DIY-Smart-Watch

    DIY Smart Watch with ATMEGA32U4 , ST7789 SPI display and RV3028-C7 Extreme Low Power RTC Module

    63 parts12
  • 4 layers65 × 30 mmAntidote audio board, the printed circuit board in 3D

    Antidote audio board

    aliadnani/antidote

    Budget neural amp modelling on a Radxa Cubie A7Z.

    62 parts12Apache-2.0
  • 2 layers40 × 60 mmJoint controller board rev d logic, the printed circuit board in 3D

    Joint controller board rev d logic

    aliahumanoid/alia-humanoid-core

    Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.

    43 parts12GPL-3.0
  • 2 layersCtrl brd reduced, the printed circuit board in 3D

    Ctrl brd reduced

    alsav/stm8-soldering-station-controller

    Tomizawa FZ-880B soldering station controller open-source firmware

    14 parts12
  • 2 layers70 × 50 mmRGBSVideo, the printed circuit board in 3D

    RGBSVideo

    amigalisa/RGBSvideoConverter

    RGB to SVideo converter for Amiga computers

    37 parts12CERN-OHL-S-2.0
  • 2 layers100 × 100 mmCaveboard, the printed circuit board in 3D

    Caveboard

    and3rson/caveboard

    https://youtu.be/Klj2Q3trmW8

    44 parts12MIT
  • 2 layers79 × 16 mmSCSI HDI30-DB25, the printed circuit board in 3D

    SCSI HDI30-DB25

    anthony-bernaert/scsi-hdi30-adapter

    SCSI HDI30 to DB25 adapter for PowerBooks

    5 parts12CERN-OHL-P-2.0