Skip to the content

Open-source KiCad boards

31 match “dynamix”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers50 × 20 mmM5stack board dynamixel ttl rs3485, the printed circuit board in 3D

    M5stack board dynamixel ttl rs3485

    kim-xps12/m5stack_board_dynamixel_ttl_rs3485

    When using this repository in your own environment, please import HY2.0-4P.kicadmod into the appropriate library. I import it into the global library so that it can be used from other projects as well.

    20 parts6MIT
  • 2 layers18 × 18 mmDynamixel Interface Pro v2, the printed circuit board in 3D

    Dynamixel Interface Pro v2

    bombarie/haribo_kimchi_toad

    Code and PCB design for the transmitter and receiver + driver board to control the Toad robot. The wireless control is achieved ising an ExpressLRS wireless link, controlled and read using arduino-compatible…

    19 parts
  • 2 layers20.3 × 15.2 mmL0 Dynamixel, the printed circuit board in 3D

    L0 Dynamixel

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    16 parts546MIT
  • 2 layers500 × 499.9 mmLolly, the printed circuit board in 3D

    Lolly

    dynamix/lolly

    Who does not like a LOLLY!

    555 parts
  • 2 layers73 × 101.5 mmCore, the printed circuit board in 3D

    Core

    dynamix/lolly

    Who does not like a LOLLY!

    13 parts
  • 2 layers500 × 500 mmManual, the printed circuit board in 3D

    Manual

    dynamix/lolly

    Who does not like a LOLLY!

    524 parts
  • 2 layers263 × 257.9 mmLolly, the printed circuit board in 3D

    Lolly

    dynamix/lolly

    Who does not like a LOLLY!

    139 parts
  • 2 layers262 × 262 mmLolly, the printed circuit board in 3D

    Lolly

    dynamix/lolly

    Who does not like a LOLLY!

    138 parts
  • 2 layers51.6 × 23.9 mmZero Palm V1, the printed circuit board in 3D

    Zero Palm V1

    molanocortes/takto-one

    Open-source hand exoskeleton that reads twelve finger joints with magnetic encoders and drives them through tendons. Full build (TAKTO ONE) or sensing-only (TAKTO Lite).

    56 parts83
  • 2 layers134.5 × 70 mm6dof, the printed circuit board in 3D

    6dof

    Ramahabir/6-DOF-Robotics-Arm-Dynamixel

    Open-source 6-DOF robot arm controller using STM32F411, Dynamixel servos, custom KiCad PCB, PWM gripper control, data logging, and planned ESP32-C3 wireless communication.

    17 parts19MIT
  • 2 layers101.6 × 53.3 mmPcb files, the printed circuit board in 3D

    Pcb files

    daveydaid/Stewart-Platform-Head-Massager

    Stewart-Gough Platform utilising Dynamixel servo motors. Control loop and simulation handled by PC side, sending control information to Arduino for servo actuation.

    28 parts12GPL-3.0
  • 2 layers52.6 × 25.9 mmPreampV3, the printed circuit board in 3D

    PreampV3

    ouspg/SOP-Robot

    Robot project for the Embedded Software Project [521275A] and Software Project [521479S]

    18 parts5
  • 2 layers68.6 × 53.3 mmTophat, the printed circuit board in 3D

    Tophat

    dbd/AdafruitMetroESP32-DynamixelHat

    A HAT designed for the AdaFruit Metro ESP32-S3 to communicate with Dynamixel servos using this library

    26 parts
  • 2 layers10.5 × 11.5 mmEncoder board, the printed circuit board in 3D

    Encoder board

    molanocortes/takto-one

    Open-source hand exoskeleton that reads twelve finger joints with magnetic encoders and drives them through tendons. Full build (TAKTO ONE) or sensing-only (TAKTO Lite).

    8 parts83
  • 2 layers14.5 × 11.9 mmMic board, the printed circuit board in 3D

    Mic board

    ouspg/SOP-Robot

    Robot project for the Embedded Software Project [521275A] and Software Project [521479S]

    4 parts5
  • 2 layers70 × 56 mmOrbigator, the printed circuit board in 3D

    Orbigator

    wyolum/orbigator

    Analog orbit propagator.

    61 parts17
  • 2 layers100 × 100 mmHexabot, the printed circuit board in 3D

    Hexabot

    Caerbannog/hexabot

    Design files and source code of a mobile robot for the Eurobot competition

    125 parts1GPL-3.0
  • 2 layers65 × 56 mmLARA hat, the printed circuit board in 3D

    LARA hat

    LuHer10/LARA

    LARA: Low-cost Assistive Robot Arm

    33 parts1
  • 2 layers39.2 × 36.6 mmLink101, the printed circuit board in 3D

    Link101

    robocore-labs/link101-hardware

    link101 is a multi-protocol USB interface board. One Type-C cable gives you CAN-FD, RS485, Dynamixel, Feetech, UART, I2C, and MIT Cheetah-protocol ports, all as stable Linux devices.

    71 parts1CERN-OHL-S-2.0
  • 2 layers25.6 × 40 mmSprit, the printed circuit board in 3D

    Sprit

    stevegt/sprit

    Raspberry Pi I/O interface board for Dynamixel XL-320 (and possibly others)

    14 parts1
  • 2 layers25.8 × 17.8 mmDynasheild, the printed circuit board in 3D

    Dynasheild

    imandel/tiltybot

    PCB adapter board for mounting a Waveshare ESP32-S3-Zero underneath, with a Dynamixel XL330 connector on top.

    4 parts
  • 2 layers85 × 56 mmLara hat v2, the printed circuit board in 3D

    Lara hat v2

    LuHer10/LARA_V2

    First flash the latest Raspberry Pi OS image to your preferred storage device. The official Raspberry Pi Imager can be used for that.

    31 parts
  • 2 layers46 × 24 mmElec BMS plus charger, the printed circuit board in 3D

    Elec BMS plus charger

    pollen-robotics/elec_battery_mngt

    Differents PCB for battery management

    52 partsCERN-OHL-W-2.0