
SparkFun Indoor Air Quality Sensor - SCD41 SEN55 panelized
sparkfun/SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55
An indoor air quality board combining the SCD41 CO2 sensor and the SEN55 PPM/VOX with humidity and temperature as well.
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

sparkfun/SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55
An indoor air quality board combining the SCD41 CO2 sensor and the SEN55 PPM/VOX with humidity and temperature as well.

sparkfun/SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55
An indoor air quality board combining the SCD41 CO2 sensor and the SEN55 PPM/VOX with humidity and temperature as well.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

miekush/pico-scd41-co2-meter
Raspberry Pi Pico and Sensirion SCD41 CO2 Meter

Szymon423/Air-Quality-Sensor
Open-hardware indoor air quality monitor: ESP32-S3, SCD41 CO₂, SHT4x temp/humidity, SPA06 pressure, WS2812 LED ring. Round PCB in KiCad, 3D-printed enclosure.

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.


tjaworski997/whisli-sense
Open-source ESP32 presence sensor with mmWave radar, environmental monitoring, web-based configuration and Home Assistant integration.

MarcFinns/AirSensor-for-HomeAssistant
AirSensor for HomeAssistant (hardware and software)


embedded-purdue/IntelliThings
From IoT to AIoT: ESP32-C6 sensor nodes, Home Assistant and an LLM agent that acts through MCP

heckler/esphome-device-configs
Configuration definitions for local ESPHome files

scattym/kicad-duct-turbo-fan-controller
Fan controller projects for the duct turbo, terrabloom and ac infinity fans



plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

tomn127/Meshtastic-With-Sensors
Utilizing Meshtastic radios to transmit values from sensors that aren't natively supported by Meshtastic.

aleemacc/air_quality_sensor
PCB design for a custom air quality measuring device

AMA-Labs/wearable-air-quality
A prototype Arduino air quality sensor designed to be worn at head level.

Anderman/Renovent
Display is een liteon De 8 segementen worden in volgorde aan gestuurd met een freq van 500uS Welke segmenten verlicht worden gaat met digit 1 - 4

awicek/STM32_CO2_LowPowerSensor
STM32 based CO2 low power sensor with logging into a SD card.



energietransitie/twomes-co2-monitor-hardware
Open hardware design files for the Twomes CO₂ Monitor Shield