2 layers78.2 × 106.2 mm
Pwmcontroller
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
67 parts2
2 layers364 × 157.5 mm
Cloudfridge
plantalytix/hardware2Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
- Size
- 364 × 157.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 77
- Pads
- 376
- Tracks, vias
- 976, 362
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 Oct 2025
- Updated
- 30 Oct 2025
Overview
Cloudfridge is an open-source printed circuit board by plantalytix, from the plantalytix/hardware repository on GitHub. It is a 2-layer board of 364 × 157.5 mm with 90 parts on 77 nets, routed with 976 tracks and 362 vias.
It is built around the ESP32-WROVER-E(4MB), ACST410-8BTR and IRM-30-12, with the MOC3063SM, BCP56 and 1N4148W among its other parts. Its parts include 29 resistors, 15 capacitors, 14 connectors, 8 ICs and 6 diodes. It belongs with the ESP32 boards of this library.
Main components
6
ESP32-WROVER-E(4MB)
SMD,18x31.4mmSMD,18x31.4mm WiFi Modules ROHSEspressif SystemsWiFi Modules
ACST410-8BTR
TO-252(DPAK)-40℃~+125℃ 1.7V 10mA 1V 20mA 32A@60Hz 4A 800V TO-252(DPAK) Power Distribution Switches ROHSSTMicroelectronicsThyristors (SCR)/Modules
IRM-30-12
-- Power Module/Power Supply ROHSMWPower Module/Power Supply
MOC3063SM
SOP-6-2.54mm-55℃~+110℃ 1 1.3V 1000V/us 100mA 330mW 5kV 6 600V 60mA TRIAC Yes SOP-6-2.54mm Triac, SCR Output Optoisolators ROHSAOTETriac, SCR Output Optoisolators
BCP56
SOT-223-55℃~+150℃ 1 NPN 1.5W 100MHz 100nA 1A 250 500mV 5V 80V NPN SOT-223 Bipolar (BJT) ROHSHXY MOSFETBipolar (BJT)
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
README.mdPlantalytix Hardware Repository
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
plantalytix-programmer
USB-C Programming adapter for all plantalyix devices. Used to flash firmware directly onto the device using the RJ12 connector on the device
plantalytix-fridgegrow2
Fridgegrow 2.0, multiple boards.
plantalytix-fan
Controller for EC Fans
plantalytix-light
Controller for dimmable LED lights
plantalytix-socket
Smart socket
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R12, R17, R18, R21, R22, R23, R24, R27, R28, R29 |
| 12 | 360R | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R8, R9, R10, R11, R13, R15, R16, R19 |
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C6, C7, C10, C14 |
| 7 | MountingHole_Pad | MountingHole:MountingHole_5.3mm_M5_Pad_Via | H1, H2, H3, H4, H5, H6, H7 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R14, R20, R25, R26 |
| 4 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D3, D4, D5 |
| 4 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5, J12, J16, J17 |
| 3 | BCP56 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q6, Q7, Q8 |
| 3 | MOC3063SM | Package_DIP:SMDIP-6_W9.53mm | U3, U4, U5 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C8, C11 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D6, D7 |
| 2 | 47pf 25v | Capacitor_SMD:C_0402_1005Metric | C13, C15 |
| 2 | ACST410-8BTR | Package_TO_SOT_SMD:TO-252-2 | Q4, Q5 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J7, J8 |
| 2 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2, J11 |
| 2 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J1, J14 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 0.1UF 25V | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C4 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | ACST830-8GTR | Package_TO_SOT_SMD:TO-263-2 | Q3 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J10 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapIn | C9 |
| 1 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Conn_02x04_Odd_Even | flexogrow:pushthrough_8p | J4 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | ESP32-WROVER-E | Espressif:ESP32-WROVER-E | U1 |
| 1 | IRM-30-12 | flexogrow:Converter_ACDC_MeanWell_IRM-30-xx_THT | PS1 |
| 1 | LOGO | fridgegrow:logo | l1 |
| 1 | MCP7940N-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | RJ12 | Connector_RJ:RJ12_Amphenol_54601 | J9 |
| 1 | SCD41 | flexogrow:SCD41 | U6 |
| 1 | TLV272IS-13 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
More from plantalytix/hardware
6- 2 layers78.2 × 106.2 mm
Lightcontroller
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
65 parts2 - 2 layers52.5 × 98.5 mm
Uniplug
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
60 parts2 - 2 layers66 × 128 mm
Cloudfridge external
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
20 parts2 - 2 layers51 × 21.9 mm
Fg programmer
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
19 parts2 - 2 layers71 × 40 mm
Fridge display
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
17 parts2
Similar boards
- 2 layers100 × 75 mm
- 2 layers396.1 × 133.9 mm
Cropdroid doser
jeremyhahn/cropdroid-doser
Dosing / nutrient controller for the CropDroid automation system.
41 parts - 2 layers316.2 × 178.4 mm
Cropdroid reservoir
jeremyhahn/cropdroid-reservoir
Please consider supporting this project for ongoing success and sustainability. I'm a passionate open source contributor making a professional living creating free, secure, scalable, robust, enterprise grade…
42 parts - 2 layers377.2 × 131.1 mm
Cropdroid room
jeremyhahn/cropdroid-room
Please consider supporting this project for ongoing success and sustainability. I'm a passionate open source contributor making a professional living creating free, secure, scalable, robust, enterprise grade…
63 parts - 4 layers138 × 114 mm
Glitchwave567
jdg511/567Terror
Software simulation of the Glitchwave 567 (LM567 glitch pedal) — JUCE Standalone + VST3
299 partsMIT - 4 layers71 × 67 mm
Power board
AndreiVladescu/Vector-UGV
An 18-DOF hexapod research platform: a smart controller per leg on CAN, a Raspberry Pi CM5 carrier, camera and SDR payload, ELRS / Wi-Fi / 4G links. Built for the PCBWay 9th Project Design Contest.
144 partsCERN-OHL-S-2.0 - 2 layers56.4 × 25.4 mm
- 2 layers77.7 × 73.2 mm
BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
40 parts22GPL-3.0
Questions
How big is the Cloudfridge PCB?
It measures 364 × 157.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cloudfridge use?
90 parts, built around the ESP32-WROVER-E(4MB), ACST410-8BTR, IRM-30-12 and MOC3063SM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cloudfridge KiCad files?
From the plantalytix/hardware repository on GitHub, at the commit this page was made from: the board is plantalytix-fridgegrow2/mainboard/cloudfridge.kicad_pcb and its schematic plantalyitx-programmer/fg_programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cloudfridge design in my own project?
Its repository states no licence, so its author keeps all rights: ask plantalytix before reusing the design.