
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

STM32 based CO2 low power sensor with logging into a SD card.
CO2 stm sensor is an open-source printed circuit board by awicek, from the awicek/STM32_CO2_LowPowerSensor repository on GitHub. It is a 2-layer board of 35 × 92 mm with 71 parts on 104 nets, routed with 573 tracks and 125 vias.
It is built around the SCD41-D-R2. Its parts include 20 capacitors, 16 resistors, 10 ICs, 4 connectors and 3 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C11, C14, C15, C19 |
| 8 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 4 | 10k R | Resistor_SMD:R_0805_2012Metric | R4, R5, R12, R13 |
| 4 | 47k R | Resistor_SMD:R_0805_2012Metric | R6, R7, R8, R9 |
| 4 | MountingHole | MountingHole:MountingHole_4mm | H1, H2, H3, H4 |
| 3 | 1u F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C17, C20 |
| 3 | 5k R | Resistor_SMD:R_0805_2012Metric | R1, R15, R16 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 2 | 2.2u F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 200p F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C18 |
| 2 | 480 R | Resistor_SMD:R_0805_2012Metric | R10, R14 |
| 2 | Conn_1x4 | JLC:CONN-TH_4P-P2.00_S4B-PH-K-S-LF-SN | J1, J2 |
| 2 | Conn_1x6 | JLC:CONN-TH_6P-P2.00_S6B-PH-K-S-LF-SN | J3, J4 |
| 2 | SWITCH_TPS22917DBVR | JLC:SOT95P280X145-6N | IC2, IC3 |
| 1 | 10u F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 20K R | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 22u F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 24MHz | JLC:CRYSTAL-SMD_4P-L2.0-W1.6-BL | Y1 |
| 1 | 30k R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 50k R | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 6.8p F | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 6.8pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | Battery_Cell | JLC:BATTERY-SMD_18650-1S-L77.1-W20.7-1 | BT1 |
| 1 | ESC_Protection_USBLC6-2SC6 | JLC:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U4 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LDO-AMS1117-3.3 | JLC:SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR | LDO1 |
| 1 | LDO_TPS7A0228PDBVR | JLC:SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U8 |
| 1 | P_MOSFET_AO3407A | JLC:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U2 |
| 1 | SCD41-D-R2 | JLC:SCD41DR2 | IC1 |
| 1 | STM32G474RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | USBC_16PIN | JLC:USB-C-SMD_TYPE-C-6PIN-2MD-073 | U3 |
| 1 | USR_BTN | JLC:pushbutton_EVQPUC02K | S2 |
| 1 | USR_WAKEUP | JLC:pushbutton_EVQPUC02K | S1 |
| 1 | sd_card_slot | JLC:TF-SMD_TF-CARD-H1.8 | U6 |
| 1 | ~ | Package_SON:MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U7 |

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.


pushtiujeniya/esp32-c6-environmental-logger
This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.

scattym/kicad-duct-turbo-fan-controller
Fan controller projects for the duct turbo, terrabloom and ac infinity fans

tomn127/Meshtastic-With-Sensors
Utilizing Meshtastic radios to transmit values from sensors that aren't natively supported by Meshtastic.

aleemacc/air_quality_sensor
PCB design for a custom air quality measuring device

Anderman/Renovent
Display is een liteon De 8 segementen worden in volgorde aan gestuurd met een freq van 500uS Welke segmenten verlicht worden gaat met digit 1 - 4

benjamincrockett/Weather-Feather-Wing
A circuit board incorporating temperature, humidity, atmospheric pressure, and CO2 sensors into an Adafruit Feather Wing form factor with Stemma QT connectors.
It measures 35 × 92 mm and has 2 copper layers, 1.61 mm thick.
71 parts, built around the SCD41-D-R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the awicek/STM32_CO2_LowPowerSensor repository on GitHub, at the commit this page was made from: the board is HW/CO2_stm_sensor/CO2_stm_sensor.kicad_pcb and its schematic HW/CO2_stm_sensor/CO2_stm_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask awicek before reusing the design.