4 layers108 × 69 mm
Fmc2sata
antmicro/fmc-sata-adapter
Adapter board exposing SATA M.2 SSD on FMC board-to-board connector
65 parts17Apache-2.0
Boards using the TPS565208DDC
31 boardsBoards in 26 GitHub repositories, designed in KiCad, that use the TPS565208DDC by Texas Instruments (-40℃~+125℃@(TJ) 1 4.5V~17V 500kHz 5A 760mV~7V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the TPS565208DDC’s symbol, footprint and pinout are on its own page.
- 2 layers100 × 84 mm
Cyclope
RICCIARDI-Adrien/Cyclope
Raspberry Pi powered robot with camera live stream and 360° lidar.
88 parts5MIT - 2 layers99 × 99 mm
2nd mainboard pcb
Fiberprinter/fiberprinter-electronics
Fiberelectronics Control every pulse, master every micron
132 parts4 - 2 layers48 × 78 mm
Sigma1
InSynchronous/mango
An ESP32-S3 based flight computer with an external flash, imu, barometer, magnetometer, 4 servo ports, and 4 pyrotechnic channels with MOSFETs. Designed for Aerospace applications.
62 parts2MIT - 2 layers50 × 87 mm
UltraHawk
InSynchronous/UltraHawk
A custom flight computer designed for drones and flight computers.
81 parts2MIT - 2 layers
Meshtastic node
ben-labs-ltd/BL-N305X
Meshtastic intended LoRa Node - Ben Labs Node 30.5dBm
115 parts1MIT - 4 layers110 × 75 mm
MainBoard nonRJ45
Gold-Rush-Robotics/pcb_2024
A repository to store work done on PCBs for the 2024 season
85 parts1MIT - 2 layers34.7 × 11.3 mm
Buck converter
akashh218/Variable-DC-DC-Buck-Converter
A custom 5A variable buck converter designed in KiCad, supporting a 4–17V input range and an adjustable 1–7V output, with a focus on compact power-stage layout, efficient power delivery, thermal management, and…
15 parts - 4 layers88.4 × 63.2 mm
Robot Controller PCB
akashh218/Voice-and-AI-Enabled-Intelligent-Robot-Controller-PCB
Custom 4-layer PCB for a voice and AI-enabled intelligent robot, integrating ESP32 control, dual DC motors, three servos, voice recognition, AI audio interaction, temperature monitoring, RGB LEDs, and expansion…
84 parts - 4 layers226.7 × 54 mm
Thingy
compressedfish/SAFMC-2025-catE-dev
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa
51 partsMIT - 4 layers109.8 × 59.1 mm
- 4 layers64 × 80 mm
Iris brainstem
HeyPCB/iris-brainstem
Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.
97 partsCERN-OHL-S-2.0 - 4 layers114.3 × 108 mm
Pellet
Mouse-GYM/auto-trainer-hardware
Repository for hardware, firmware, and software related to the Mouse-GYM modules
202 parts - 4 layers
- 2 layers200 × 100.3 mm
OBC PDB
MUN-Baja/OBC-PDB
PCB design of Power Distribution Board and the On Board Computer with a ATMEGA2560 uC.
140 parts - 4 layers45 × 81 mm
RAM R2
nimishcoder1232/Bedroom-Engineering-Propulsive-Landing-Project
This repo has everything that I made for my rocket that can propulsive landing, while still being under ITAR restrictions.
78 parts - 2 layers45.3 × 81 mm
RAM R2
nimishcoder1232/TVC-Rocket
This is the repo for my TVC rocket that took two years to develop.
65 parts - 2 layers68.4 × 36.7 mm
Emf beacon
PolybiusBiotech/led_beacon
The PCBA and firmware for the controllable LED Beacons.
134 parts - 4 layers79 × 80 mm
- 4 layers100 × 85 mm
CM5 Edge Carrier
xmyoot/rpi-cm5-edge-carrier
Raspberry Pi CM5 edge-AI audio carrier: KiCad 10, 4-layer impedance-controlled, USB-C PD, NVMe, USB3, GbE, I2S mic link. DRC-clean, JLCPCB-ready, fully scripted.
90 parts - 2 layers51.6 × 34.3 mm
- 4 layers82.5 × 125.6 mm
SwerveDriveTrain
Gold-Rush-Robotics/pcb_2024
A repository to store work done on PCBs for the 2024 season
39 parts1MIT - 2 layers21.5 × 9.4 mm
DC DC 5V4A
flitebits/rclib
Atmega 4808/4809 hardware support focused on Radio Controlled aircraft
11 partsApache-2.0 - 4 layers109.8 × 59.1 mm
