Skip to the content

Boards using the TPS26600RHFR

7 boards

Boards in 6 GitHub repositories, designed in KiCad, that use the TPS26600RHFR by Texas Instruments (-40℃~+125℃@(Tj) 1 150mΩ 1mm 4.2V~60V 4mm 5mm Integrated FET Surface Mount VQFN-24(5x4) Surge Protection Devices (SPDs) ROHS). See how each wires it, with its parts, size, README and files; the TPS26600RHFR’s symbol, footprint and pinout are on its own page.

  • 6 layers65 × 50 mmSwitch main v4, the printed circuit board in 3D

    Switch main v4

    ben5049/switch-v4-hardware

    KiCad design files for the 4th iteration of my single pair Ethernet (SPE) switch. The firmware can be found in unified-switch-firmware.

    471 parts33GPL-3.0
  • 6 layers93 × 50 mmSwitch main v5, the printed circuit board in 3D

    Switch main v5

    ben5049/switch-v5-hardware

    KiCad design files for the 5th iteration of my single pair Ethernet (SPE) switch. It is similar to v4 but with more ports and an RJ45 connector so an external media converter isn't needed to connect to regular Ethernet…

    646 parts25AGPL-3.0
  • 6 layers70 × 80 mmCm5-carrier v2, the printed circuit board in 3D

    Cm5-carrier v2

    ben5049/cm-carrier-hardware

    Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.

    334 parts1AGPL-3.0
  • 4 layers35 × 35 mmCanonical, the printed circuit board in 3D

    Canonical

    AnasSarkiz/smart-nema14-motor-controller

    STEPPERONLINE 14HM11-0404S controller — unrouted work-in-progress prototype; mechanical and electrical qualification pending

    213 parts
  • 2 layers50 × 50 mmOpen Battery Charger, the printed circuit board in 3D

    Open Battery Charger

    DavidVeloz95/Open-Source-Battery-Smart-Charger

    Embedded power electronics project: intelligent 2S Li-Ion charger with protection, power switching and monitoring, designed in KiCad.

    47 partsMIT
  • 4 layers55 × 85 mmSAE Cellular Module, the printed circuit board in 3D

    SAE Cellular Module

    ephrenm/VehiCell

    NRF9151-based cellular telemetry device designed for a FSAE EV vehicle.

    152 parts
  • 6 layers70 × 80 mmCm5-carrier v1, the printed circuit board in 3D

    Cm5-carrier v1

    ben5049/cm-carrier-hardware

    Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.

    245 parts1AGPL-3.0