
Cm5-carrier v1
ben5049/cm-carrier-hardware
Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.

Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.
Cm5-carrier v2 is an open-source printed circuit board by ben5049, from the ben5049/cm-carrier-hardware repository on GitHub, published under the AGPL-3.0 licence. It is a 6-layer board of 70 × 80 mm with 334 parts on 377 nets, routed with 4,211 tracks and 890 vias.
It is built around the ADS7128IRTER, MAX20008AFOC/VY+T and TPS62825DMQR, with the TPS62827DMQR, PESD4USB3BTTS-QX and AT24C64D-MAHM-E among its other parts. Its parts include 134 capacitors, 87 resistors, 24 ICs, 17 diodes and 11 connectors. It belongs with the computers and single-board computers boards of this library.
Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 100n | project_footprints:C_0402 | C1008, C1009, C1022, C1023, C1031, C1032, C1035, C1039, C1041, C1043, C1045, C1047, C1048, C1050, C1101, C1102 +18 |
| 33 | 1.5mm | project_footprints:TestPoint_Pad_D1.5mm | TP101, TP102, TP103, TP1001, TP1002, TP1003, TP1004, TP1005, TP1006, TP1007, TP1008, TP1009, TP1101, TP1102, TP1103, TP1104 +17 |
| 28 | 1n | project_footprints:C_0402 | C1001, C1002, C1003, C1004, C1005, C1006, C1007, C1012, C1013, C1014, C1019, C1020, C1021, C1026, C1027, C1028 +12 |
| 26 | 10k | project_footprints:R_0402 | R1001, R1002, R1003, R1005, R1008, R1017, R1018, R1019, R1020, R1025, R1101, R1102, R1103, R1104, R1105, R1106 +10 |
| 25 | 4u7 | project_footprints:C_0402 | C601, C602, C603, C604, C609, C610, C611, C612, C613, C614, C615, C1049, C1103, C1109, C1116, C1123 +9 |
| 15 | 1u | project_footprints:C_0402 | C301, C303, C304, C402, C501, C502, C605, C1010, C1011, C1024, C1025, C1033, C1107, C1108, C1117 |
| 12 | 22R | project_footprints:R_0402 | R1011, R1012, R1013, R1014, R1015, R1016, R1107, R1108, R1109, R1110, R1111, R1112 |
| 12 | 22u | project_footprints:C_0805 | C403, C404, C405, C406, C415, C416, C417, C418, C802, C803, C804, C805 |
| 11 | 1k | project_footprints:R_0402 | R301, R302, R703, R704, R1004, R1006, R1021, R1022, R1026, R1027, R1116 |
| 10 | 100k | project_footprints:R_0402 | R401, R403, R407, R411, R501, R601, R603, R1007, R1009, R1023 |
| 7 | PESD4USB3BTTS-QX | project_footprints:PESD4USB3BTTSQX | U801, U802, U803, U804, U805, U806, U808 |
| 5 | 12k1 | project_footprints:R_0402 | R309, R409, R413, R803, R1113 |
| 5 | PMEG4002EL-QYL | project_footprints:PMEG4002EL-QYL | D401, D402, D701, D702, D1001 |
| 4 | 100n | project_footprints:C_0603 | C302, C408, C1124, C1125 |
| 4 | 10p | project_footprints:C_0402 | C1052, C1053, C1121, C1122 |
| 4 | 220n | project_footprints:C_0402 | C1015, C1016, C1017, C1018 |
| 4 | 9774015951R | project_footprints:9774015951 | H101, H102, H104, H105 |
| 4 | DMN21D2UFB-7B | project_footprints:DMN21D2UFB7B | Q401, Q402, Q403, Q701 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5_Pad | H103, H106, H107, H108 |
| 3 | 22k | project_footprints:R_0402 | R308, R404, R414 |
| 3 | 2k2 | project_footprints:R_0402 | R901, R902, R1010 |
| 3 | 47k | project_footprints:R_0402 | R311, R408, R604 |
| 3 | 4k7 | project_footprints:R_0402 | R306, R415, R416 |
| 3 | RED | project_footprints:LED_0402 | D403, D404, D704 |
| 3 | SZESD7241N2T5G | project_footprints:SZESD7462N2T5G | D301, D1103, D1104 |
| 3 | SZESD8472MUT5G | project_footprints:SZESD7462N2T5G | D801, D802, D803 |
| 2 | 1M | project_footprints:R_0402 | R405, R406 |
| 2 | 2n2 | project_footprints:C_0402 | C409, C410 |
| 2 | 450k | project_footprints:R_0402 | R310, R602 |
| 2 | 470R | project_footprints:R_0402 | R801, R802 |
| 2 | 56k | project_footprints:R_0402 | R502, R605 |
| 2 | 9774015243R | project_footprints:9774025243R | H1201, H1202 |
| 2 | DFE201610E-R47M=P2 | Inductor_SMD:L_Murata_DFE201610P | L601, L602 |
| 2 | FH12-20S-0.5SH | project_footprints:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | J801, J802 |
| 2 | FH12-22S-0.5SH | project_footprints:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J901, J902 |
| 2 | GREEN | project_footprints:LED_0402 | D703, D1101 |
| 2 | XRCGB25M000F3A16R0 | project_footprints:XRCGB25M000F3A16R0 | Y1001, Y1101 |
| 1 | 120k | project_footprints:R_0402 | R304 |
| 1 | 120p | project_footprints:C_0402 | C607 |
| 1 | 200R | project_footprints:R_0402 | R1024 |
| 1 | 220p | project_footprints:C_0402 | C608 |
| 1 | 2u2 | project_footprints:C_0402 | C411 |
| 1 | 43045-0201 | project_footprints:43045-02YY | J301 |
| 1 | 47n | project_footprints:C_0402 | C305 |
| 1 | 48406-0003 | project_footprints:48406-0003 | J804 |
| 1 | 4p7 | project_footprints:C_0402 | C414 |
| 1 | 4u7 | project_footprints:C_0603 | C407 |
| 1 | 680R | project_footprints:R_0402 | R412 |
| 1 | 7443844020010 | project_footprints:L_Wurth_WE-MXGI-4020 | L401 |
| 1 | 824012823 | project_footprints:824012823 | D1102 |
| 1 | ACT1210G-800-2P-TL10 | project_footprints:ACT1210G | FL1101 |
| 1 | ADS7128IRTER | project_footprints:QFN50P300X300X80-17N-D | U301 |
| 1 | AP22653FDZ-7 | project_footprints:SON65P200X200X80-7N-D | U807 |
| 1 | ARJM11D7-502-AB-EW2 | project_footprints:ARJM11D7-502-AB-EW2_ABR | J805 |
| 1 | ASEK-32.768KHZ-LRT | project_footprints:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1201 |
| 1 | AT24C64D-MAHM-E | project_footprints:SON50P300X200X60-9N | U1003 |
| 1 | AZV3001FZ4-7 | project_footprints:AZV3001FZ47 | U401 |
| 1 | JST-SH-4-Horizontal | project_footprints:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J803 |
| 1 | JST-SH-4-Vertical | project_footprints:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J701 |
| 1 | LAN8870 | project_footprints:lan8870 | U1101 |
| 1 | LOGO | project_footprints:aquila-8mm | G*** |
| 1 | LOGO | project_footprints:red-scorpions-10mm | G*** |
| 1 | LOGO | project_footprints:adeptus-mechanicus-10mm | G*** |
| 1 | MAX20008AFOC/VY+T | project_footprints:MAX20004AFOC_VY+ | U403 |
| 1 | MDT420E0X001 | project_footprints:MDT420E0X001 | J1201 |
| 1 | MSPE-J2L0-x00 | project_footprints:MSPEJ2L0x00 | J1101 |
| 1 | NX3DV221GM | project_footprints:NX3DV221GM115 | U701 |
| 1 | PCI11010C | project_footprints:PCI11010C | U1002 |
| 1 | PCM12SMTBR | project_footprints:PCM12SMTBR | S701 |
| 1 | RP-CM5 | project_footprints:Raspberry-Pi-5-Compute-Module | SOM701 |
| 1 | SYA75603A | project_footprints:SYA7560x | U1001 |
| 1 | TPS2116DRL | project_footprints:SOTFL50P160X60-8N | U502 |
| 1 | TPS22991CNRAAR | project_footprints:TPS22991CNRAAR | U601 |
| 1 | TPS259470ARPW | project_footprints:TPS259472ARPWR | U402 |
| 1 | TPS26600RHFR | project_footprints:QFN50P400X500X100-25N-D | U303 |
| 1 | TPS62825DMQR | project_footprints:TPS6282xDMQR | U603 |
| 1 | TPS62827DMQR | project_footprints:TPS6282xDMQR | U602 |
| 1 | TPS7B8133QDRVRQ1 | project_footprints:SON65P200X200X80-7N | U501 |
| 1 | TS20-42-25-WT-160-SMT-TR | project_footprints:TS204225WT160SMTTR | SW701 |
| 1 | TVS2701DRBR | project_footprints:SON65P300X300X100-9N-D | U302 |
The 333 most common of 334 parts.

ben5049/cm-carrier-hardware
Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.

ben5049/switch-v4-hardware
KiCad design files for the 4th iteration of my single pair Ethernet (SPE) switch. The firmware can be found in unified-switch-firmware.

ben5049/switch-v5-hardware
KiCad design files for the 5th iteration of my single pair Ethernet (SPE) switch. It is similar to v4 but with more ports and an RJ45 connector so an external media converter isn't needed to connect to regular Ethernet…


northernpaws/pocketsequencer
STM32H743ZI-based pocket-sized sequencer with synth engines and sampler, velocity pads, MPE aftertouch, BLE MIDI, Bluetooth audio, and more.


JunOllyLi/TX_PCB
NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.

n416/katanori
⚠ 2026-09-15 に全体を書き直した(2026-08-19 の状態のまま止まっていて、「筐体 v2 を設計中」「電池はまだ」と書いてあった)。

o7-machinehum/flipper-blackhat
Linux based WiFi pentesting device for the Flipper Zero.
It measures 70 × 80 mm and has 6 copper layers, 1.05 mm thick.
334 parts, built around the ADS7128IRTER, MAX20008AFOC/VY+T, TPS62825DMQR and TPS62827DMQR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ben5049/cm-carrier-hardware repository on GitHub, at the commit this page was made from: the board is pcbs/cm5-carrier-v2/cm5-carrier-v2.kicad_pcb and its schematic pcbs/CM5IO/CM5IO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).