Skip to the content

ADS7128IRTER

Texas InstrumentsExtended

-40℃~+85℃ 1.65V~5.5V、2.35V~5.5V 12 1MHz 2LSB 430uA 72dB 8 Auto calibration、Multiplexers、Power-on reset、Soft reset Built-in I2C No SAR WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS7128IRTER
Category
Analog To Digital Converters (ADC)
Package
WQFN-16-EP(3x3)
Pins
17
In stock
1 at JLCPCB (C2867992)
Used on
2 open-source boards

Overview

The ADS7128IRTER is an analog To Digital Converter made by Texas Instruments in a WQFN-16-EP(3x3) package with 17 pins. -40℃~+85℃ 1.65V~5.5V、2.35V~5.5V 12 1MHz 2LSB 430uA 72dB 8 Auto calibration、Multiplexers、Power-on reset、Soft reset Built-in I2C No SAR WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS7138IRTER, from EasyEDA) and its footprint (EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-TL-EP1.7, from EasyEDA), ready for a KiCad board. 1 are in stock at JLCPCB (part C2867992). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1AIN2/GPIO22AIN3/GPIO33AIN4/GPIO44AIN5/GPIO55AIN6/GPIO66AIN7/GPIO77AVDD8DECAP9GND10DVDD11ADDR12ALERT13SCL14SDA15AIN0/GPIO016AIN1/GPIO117EP
EasyEDA_Cloud:ADS7138IRTERFrom EasyEDA

Footprint

EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-TL-EP1.7From EasyEDA

Pinout

17
The pins of the ADS7128IRTER
PinNameType
1AIN2/GPIO2Unspecified
2AIN3/GPIO3Unspecified
3AIN4/GPIO4Unspecified
4AIN5/GPIO5Unspecified
5AIN6/GPIO6Unspecified
6AIN7/GPIO7Unspecified
7AVDDUnspecified
8DECAPUnspecified
9GNDUnspecified
10DVDDUnspecified
11ADDRUnspecified
12ALERTUnspecified
13SCLUnspecified
14SDAUnspecified
15AIN0/GPIO0Unspecified
16AIN1/GPIO1Unspecified
17EPUnspecified

Open-source boards using it

2
  • 6 layers70 × 80 mmCm5-carrier v2, the printed circuit board in 3D

    Cm5-carrier v2

    ben5049/cm-carrier-hardware

    Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.

    334 parts1AGPL-3.0
  • 6 layers74 × 140 mmPocket synth, the printed circuit board in 3D

    Pocket synth

    northernpaws/pocketsequencer

    STM32H743ZI-based pocket-sized sequencer with synth engines and sampler, velocity pads, MPE aftertouch, BLE MIDI, Bluetooth audio, and more.

    385 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the ADS7128IRTER?

Yes. The symbol is EasyEDA_Cloud:ADS7138IRTER and the footprint EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-TL-EP1.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS7128IRTER?

WQFN-16-EP(3x3), with 17 pins. Its footprint is drawn on this page.

Where is the ADS7128IRTER datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS7128IRTER?

JLCPCB lists it as part C2867992, with 1 in stock; the sellers' links on this page open their listings.

What can replace the ADS7128IRTER?

Parts like it in the library: the TLA2528IRTE by Texas Instruments, the ADS7038QRTERQ1 by Texas Instruments, the TLA2518IRTE by Texas Instruments and the ADS7946SRTE by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADS7128IRTER?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.