Skip to the content

ADS7038IRTER

Texas InstrumentsExtended

-40℃~+125℃ 0.5LSB 12 1MHz 2.35V~5.5V 600uA 60MHz 73.1dB 8 Built-in Built-in No Not supported SAR SPI WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS7038IRTER
Category
Analog To Digital Converters (ADC)
Package
WQFN-16-EP(3x3)
Pins
17
In stock
0 at JLCPCB (C2871580)
Used on
4 open-source boards

Overview

The ADS7038IRTER is an analog To Digital Converter made by Texas Instruments in a WQFN-16-EP(3x3) package with 17 pins. -40℃~+125℃ 0.5LSB 12 1MHz 2.35V~5.5V 600uA 60MHz 73.1dB 8 Built-in Built-in No Not supported SAR SPI WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS7028IRTER, from EasyEDA) and its footprint (EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-TL-EP1.7, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2871580). 4 open-source boards in 2 repositories on GitHub use it.

Symbol

1AIN2/GPIO22AIN3/GPIO33AIN4/GPIO44AIN5/GPIO55AIN6/GPIO66AIN7/GPIO77AVDD8DECAP9GND10DVDD11CS#12SDO13SCLK14SDI15AIN0/GPIO016AIN1/GPIO117EP
EasyEDA_Cloud:ADS7028IRTERFrom EasyEDA

Footprint

EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-TL-EP1.7From EasyEDA

Pinout

17
The pins of the ADS7038IRTER
PinNameType
1AIN2/GPIO2Unspecified
2AIN3/GPIO3Unspecified
3AIN4/GPIO4Unspecified
4AIN5/GPIO5Unspecified
5AIN6/GPIO6Unspecified
6AIN7/GPIO7Unspecified
7AVDDUnspecified
8DECAPUnspecified
9GNDUnspecified
10DVDDUnspecified
11CS#Unspecified
12SDOUnspecified
13SCLKUnspecified
14SDIUnspecified
15AIN0/GPIO0Unspecified
16AIN1/GPIO1Unspecified
17EPUnspecified

Open-source boards using it

4
  • 2 layers238 × 114 mmPanel, the printed circuit board in 3D

    Panel

    sbarisic/MagMouse

    Open source hall-effect based mouse - no mechanical contacts - no failure points

    384 parts2
  • 4 layers68.6 × 53.3 mmPhyduino pico2, the printed circuit board in 3D

    Phyduino pico2

    perc-sw/phyduino_pico2

    CAD files for the student workshop Phyduino Pico2 Arduino IDE compatible board.

    179 partsGPL-3.0
  • 2 layers70 × 100 mmUpper, the printed circuit board in 3D

    Upper

    sbarisic/MagMouse

    Open source hall-effect based mouse - no mechanical contacts - no failure points

    92 parts2
  • 2 layers70 × 67 mmWheel, the printed circuit board in 3D

    Wheel

    sbarisic/MagMouse

    Open source hall-effect based mouse - no mechanical contacts - no failure points

    87 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADS7038IRTER?

Yes. The symbol is EasyEDA_Cloud:ADS7028IRTER and the footprint EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-TL-EP1.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS7038IRTER?

WQFN-16-EP(3x3), with 17 pins. Its footprint is drawn on this page.

Where is the ADS7038IRTER datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS7038IRTER?

JLCPCB lists it as part C2871580, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ADS7038IRTER?

Parts like it in the library: the TLA2518IRTE by Texas Instruments, the ADC08060CIMTX by Texas Instruments, the ADS7047IRUGR by Texas Instruments and the MCP33131-10-E/MS by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADS7038IRTER?

4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.