Skip to the content

Boards using the TPD2E2U06DCK

25 boards

Boards in 24 GitHub repositories, designed in KiCad, that use the TPD2E2U06DCK by Texas Instruments (-40℃~+125℃ 1.5pF 10nA 12.4V 2 5.5A@8/20us 5.5V 6.5V 75W@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5 TVS SC-70-3 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the TPD2E2U06DCK’s symbol, footprint and pinout are on its own page.

  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 4 layers58.8 × 29 mmSparkAltBatteryBoardV1, the printed circuit board in 3D

    SparkAltBatteryBoardV1

    fahreddinaykut/SparkAltBatteryBoard

    A custom research-oriented battery interface and telemetry board for the DJI Spark platform, built around a standard 3S LiPo battery pack instead of the discontinued, hard-to-find OEM Smart Battery.

    46 parts20
  • 2 layers93.6 × 102.8 mmMote hardware, the printed circuit board in 3D

    Mote hardware

    empriselab/mote

    A low cost, high confidence mobile robot optimized for education.

    75 parts5MIT
  • 4 layers52.7 × 42.5 mmOmniProbe, the printed circuit board in 3D

    OmniProbe

    emertcakir/OmniProbe

    Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040

    77 parts4MIT
  • 2 layers66.6 × 41.3 mmUPIC46, the printed circuit board in 3D

    UPIC46

    emertcakir/uPIC46

    PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs

    111 parts2MIT
  • 4 layers100 × 100 mmBase module, the printed circuit board in 3D

    Base module

    KoNarRobotics/ModuCard-base-module

    Template for ModuCard PCBs

    163 parts2
  • 4 layers22.9 × 50.8 mmSpethernet featherwing, the printed circuit board in 3D

    Spethernet featherwing

    parzivail/adin1110-breakout

    ADIN1110 Single-pair Ethernet controller breakout with SPI

    48 parts2CERN-OHL-P-2.0
  • 2 layers125 × 78.2 mmRC ESP32 V2, the printed circuit board in 3D

    RC ESP32 V2

    Poent/RC-Snowblower

    Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.

    84 parts2
  • 2 layers74.5 × 49 mmEEG, the printed circuit board in 3D

    EEG

    wangq22/ADS1299-BioAmp

    ADS1299 BioAmp is an 8-channel biopotential acquisition board designed for research and development of EEG, EMG, ECG, and other low-amplitude bioelectrical signals.

    76 parts2
  • 4 layers80 × 80 mmTravel router, the printed circuit board in 3D

    Travel router

    0x62b/travel-router

    CM5 travel router carrier board with dual 1G ethernet, wifi

    56 parts1
  • 4 layers80 × 50 mmGlowbuck, the printed circuit board in 3D

    Glowbuck

    Diamantenmine/glowbuck

    Together with Firefly Luciferin, you can create your own ambilight that connects via USB-C to your computer and draws power from a USB-C PD power supply. Glowbuck is in no way associated with the linked project.

    132 parts1GPL-3.0
  • 4 layers100 × 100 mmOrangePie, the printed circuit board in 3D

    OrangePie

    ArthorH/ModuCard-OrangePie

    Orange Pi 5 pro adapter board for ModuCard System

    166 parts
  • 6 layersGateway X6, the printed circuit board in 3D

    Gateway X6

    bgmbzk/Gateway-X6

    STM32 mimarisi ve SDRAM arayüzü üzerine kurulu, yüksek hızlı 6 katmanlı endüstriyel gateway PCB tasarımı. Kesintisiz GND/PWR referans katmanları, +24V güç mimarisi ve üretime hazır Gerber çıktıları içerir.

    65 parts
  • 2 layers59.1 × 49.1 mmCustom RP2040, the printed circuit board in 3D

    Custom RP2040

    dsaketh/kicad-projects

    KiCad PCB designs

    35 parts
  • 2 layers135 × 21 mmUsbc pd airsoft module, the printed circuit board in 3D

    Usbc pd airsoft module

    Fluffik214/airsoft-battery-module

    This is a USB-C PD charger and cell monitor for a 3S LiPo that lives in an airsoft stock tube. It has one USB-C port.

    98 parts
  • 4 layers87 × 55 mmFSC BT1104QI Breakout, the printed circuit board in 3D

    FSC BT1104QI Breakout

    fsanzeni/FSC-BT1104QI-Breakout

    Breakout board for Feasycom FSC-BT1104QI (Bluetooth 5.4 / QCC3095) with USB-C/UART bridge, 3.3V LDO regulation, I2S digital audio, differential speaker outputs, and all pads broken out.

    77 partsMIT
  • 2 layers180 × 135 mmFarmHqRelay R1, the printed circuit board in 3D

    FarmHqRelay R1

    kjdykstra406/Pivot-Control-PCB

    "# Pivot-Control-P(kicadsch (version 20250114) (generator "eeschema") (generatorversion "9.0") (uuid "5632ba6c-34ff-4a54-b5e1-022e30e0e773") (paper "A0") (libsymbols (symbol "Adafruit I2C to 8 Channel Solenoid…

    230 parts
  • 2 layers60 × 50 mmESP32-P4-CAM MAIN, the printed circuit board in 3D

    ESP32-P4-CAM MAIN

    momszx/esp32-p4-cam

    ESP32-P4 compact WiFi streaming camera - KiCad 10 hardware (MAIN rev A, 4-layer 45x45 mm) and design docs

    127 parts
  • 4 layers105 × 120 mmTvac, the printed circuit board in 3D

    Tvac

    thanasipantazides/tate-thermovac

    Readout board and code for the Tate 220 thermovacuum chamber

    154 parts
  • 4 layers100 × 100 mmModuCard mms extension pdw board, the printed circuit board in 3D

    ModuCard mms extension pdw board

    X-Lemon-X/ModuCard-mms-extension-pdw-board

    This repository provides a template design for creating modules in the ModuCard system. Each module is designed to seamlessly interface with the ModuCard backplane, enabling a modular and expandable robotics platform.

    161 parts
  • 4 layers98 × 58 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    melair/ktane

    Keep Talking and Nobody Explodes - Physical Edition

    94 parts5
  • 2 layers25 × 6.5 mmConnector, the printed circuit board in 3D

    Connector

    marksdude/Pikne

    A modular and repairable power bank

    7 parts1
  • 2 layers37.5 × 10 mmConnector, the printed circuit board in 3D

    Connector

    marksdude/Pikne

    A modular and repairable power bank

    5 parts1