

Glowbuck
Together with Firefly Luciferin, you can create your own ambilight that connects via USB-C to your computer and draws power from a USB-C PD power supply. Glowbuck is in no way associated with the linked project.
- Size
- 80 × 50 mm
- Copper layers
- 4
- Thickness
- 1.56 mm
- Parts
- 132
- Nets
- 109
- Pads
- 457
- Tracks, vias
- 645, 542
- Pours
- 389
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Nov 2025
- Updated
- 1 Feb 2026
Overview
Glowbuck is an open-source printed circuit board by Diamantenmine, from the Diamantenmine/glowbuck repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 80 × 50 mm with 132 parts on 109 nets, routed with 645 tracks and 542 vias.
It is built around the ESP32-S3-WROOM-1-N8, AP63203WU and SIC437AED, with the SN74LVC1T45DBV, TPD2E2U06DCK and 2N7002NXAKR among its other parts. Its parts include 38 resistors, 30 capacitors, 8 connectors, 7 ICs and 5 diodes. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersSIC437AED
MLP44-24L(4x4)-40℃~+125℃ 1 12A 300kHz~1MHz 3V~28V 50uA 600mV~20V Adjustable Buck Buck Built-in Yes MLP44-24L(4x4) DC-DC Converters ROHSVishay IntertechnologyDC-DC ConvertersSN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTPD2E2U06DCK
SC-70-3-40℃~+125℃ 1.5pF 10nA 12.4V 2 5.5A@8/20us 5.5V 6.5V 75W@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5 TVS SC-70-3 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)2N7002NXAKR
SOT-23-55℃~+150℃ 1 N-channel 190mA、300mA 2.1V 20pF 265mW、1.33W 4.5Ω@10V 430pC@4.5V 60V SOT-23 MOSFETs ROHSNexperiaMOSFETsSMBJ22A-TR
SMB(DO-214AA)-55℃~+150℃ 200nA 22V 25.7V 48.3A@8/20us 48.3V 4kW@8/20us IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdglowbuck
Glowbuck is a voltage converter and control board that allows you to power addressable LED strips with USB-C PD.
Together with Firefly Luciferin, you can create your own ambilight that connects via USB-C to your computer and draws power from a USB-C PD power supply. Glowbuck is in no way associated with the linked project.
Quick Facts:
- Output: 5 V @ 10 A
- Input: 20 V @ 3 A. Via I2C, the microcontroller can reconfigure the PD controller and negotiate other voltage and current requirements for the input.
- Microcontroller: ESP32 S3
- Output current measurement with an integrated shunt
Warning and Disclaimer
Warning: This project is in a alpha state and the hardware has not yet been tested.
This project is provided "as is" without warranty of any kind, either expressed or implied. The author makes no guarantees regarding the functionality, reliability, or suitability of this project for any particular purpose. By using this project, you acknowledge and agree that:
- No liability is accepted for any damages, losses, or issues arising from the use or inability to use this project
- There is no guarantee that this project will work as intended or work at all
- The author shall not be held responsible for any direct, indirect, incidental, or consequential damages
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP103, TP104, TP105, TP106, TP107, TP108, TP109, TP110, TP111, TP401, TP402, TP403, TP404, TP405 |
| 13 | 100k | Resistor_SMD:R_0603_1608Metric | R107, R108, R203, R204, R205, R207, R208, R210, R211, R402, R407, R408, R410 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C102, C103, C104, C105, C106, C107, C108, C202, C301, C402, C403, C404 |
| 12 | 5k1 | Resistor_SMD:R_0603_1608Metric | R101, R102, R104, R105, R106, R110, R206, R212, R213, R214, R401, R405 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C101, C204, C207, C208, C304, C305 |
| 6 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID101, FID102, FID103, FID104, FID105, FID106 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H101, H102, H103, H104 |
| 4 | NetTie_2 | glowbuck:NETTIE_0.3mm | NT101, NT102, NT301, NT402 |
| 4 | SolderJumper_2_Open | glowbuck:SolderJumper_Open_HighCurrent | JP101, JP102, JP103, JP104 |
| 3 | 0R | Resistor_SMD:R_0603_1608Metric | R103, R201, R406 |
| 3 | 10u | Capacitor_SMD:C_1210_3225Metric | C201, C203, C303 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C408, C409, C410 |
| 3 | 22k | Resistor_SMD:R_0603_1608Metric | R209, R404, R409 |
| 3 | 3k | Resistor_SMD:R_0603_1608Metric | R202, R215, R411 |
| 3 | 47 uF | Capacitor_SMD:C_1210_3225Metric | C405, C406, C407 |
| 3 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_3.0x3.0mm | J104, J105, J106 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R111, R112 |
| 2 | 330p | Capacitor_SMD:C_0603_1608Metric | C205, C206 |
| 2 | MSS1P4-M3/89A | Diode_SMD:D_MicroSMP_AK | D101, D102 |
| 2 | SW_Push | rise:PTS526_GPins_NoGround_2Pole | SW101, SW102 |
| 2 | SolderJumper_3_Bridged12 | glowbuck:SolderJumper_123_0603 | JP201, JP202 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP301, TP302 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_3.0x3.0mm | TP101, TP102 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J201, J202 |
| 1 | 0R002 | Resistor_SMD:R_0805_2012Metric | R109 |
| 1 | 100u | Capacitor_SMD:CP_Elec_8x10 | C401 |
| 1 | 2N7002NXAKR | Package_TO_SOT_SMD:SOT-23-3 | Q401 |
| 1 | 2R2 | Resistor_SMD:R_0603_1608Metric | R403 |
| 1 | 2u2 | Inductor_SMD:L_Vishay_IHLP-6767 | L401 |
| 1 | 3u9 | rise:BOURNS_SRR7045 | L301 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U301 |
| 1 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_1.0x1.0mm | J103 |
| 1 | Conn_01x04_Socket | glowbuck:PTS 1,5_ 4-5,0-H | J102 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x08_P2.00mm_Vertical | J101 |
| 1 | D_Photo | Diode_SMD:D_1206_3216Metric | D104 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U101 |
| 1 | INA181A3 | Package_TO_SOT_SMD:SOT-23-6 | U102 |
| 1 | LED Green | LED_SMD:LED_0603_1608Metric | D103 |
| 1 | NetTie_2 | glowbuck:NETTIE_0.2mm | NT401 |
| 1 | SIC437A | Package_DFN_QFN:Vishay_PowerPAK_MLP44-24L_ThermalVias | U401 |
| 1 | SMBJ22A-TR | Diode_SMD:D_SMB | D201 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U103 |
| 1 | TPD2E2U06DCK | Package_TO_SOT_SMD:SOT-323_SC-70 | U202 |
| 1 | TPS25730D | Package_DFN_QFN:Texas_REF0038A_WQFN-38-2EP_6x4mm_P0.4 | U201 |
Similar boards
- 4 layers100 × 80 mm

- 4 layers58.8 × 29 mm

SparkAltBatteryBoardV1
fahreddinaykut/SparkAltBatteryBoard
A custom research-oriented battery interface and telemetry board for the DJI Spark platform, built around a standard 3S LiPo battery pack instead of the discontinued, hard-to-find OEM Smart Battery.
46 parts20 - 2 layers100 × 100 mm

- 4 layers108.6 × 87.7 mm

Blinky badge light
rowr111/blinky-badge-light
lighting badge with unique patterns and sound reactivity
123 parts9MIT - 2 layers95 × 95 mm

- 4 layers88.7 × 49.5 mm

- 4 layers

- 2 layers137 × 84 mm

ESP32-Geiger Counter
AronASzucs/Avalanche32
Handheld ESP32-S3 Geiger counter with a firmware-regulated 400 V boost, SBM-20 tube, USB-C charging and OLED display.
89 parts3
Questions
How big is the Glowbuck PCB?
It measures 80 × 50 mm and has 4 copper layers, 1.56 mm thick.
What parts does the Glowbuck use?
132 parts, built around the ESP32-S3-WROOM-1-N8, AP63203WU, SIC437AED and SN74LVC1T45DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glowbuck KiCad files?
From the Diamantenmine/glowbuck repository on GitHub, at the commit this page was made from: the board is hardware/glowbuck.kicad_pcb and its schematic hardware/Buck3V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glowbuck design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).