
SN74LVC1T45DBV
Texas InstrumentsExtended
-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHS
- Part id
- ti/SN74LVC1T45DBV
- Category
- Translators, Level Shifters
- Package
- SOT-23-6
- Pins
- 6
- In stock
- 232,146 at JLCPCB (C7843)
- Used on
- 120 open-source boards
Overview
The SN74LVC1T45DBV is a translators, Level Shifter made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHS.
PCBKit's library has its KiCad symbol (Logic_LevelTranslator:SN74LVC1T45DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 232,146 are in stock at JLCPCB (part C7843). 120 open-source boards in 100 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
12- Supply, least
- 1.65 V · VCCA, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCCA, recommended operating max · p. 4
- Supply, absolute maximum
- 6.5 V · VCCA, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 5
- Works up to
- 85 °C · Operating free-air temperature max · p. 5
- Junction, hottest
- 150 °C · Junction temperature max · p. 4
- Takes working
- 4 µA · sum of ICCA and ICCB max, inputs at rails, IO = 0 · p. 6
- A pin gives at most
- 50 mA · Continuous output source or sink current absolute max · p. 4
- Junction to air (DBV)
- 215.1 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DBV)
- 136.5 K/W · Junction-to-case (top) thermal resistance · p. 5
- Junction to board (DBV)
- 96.6 K/W · Junction-to-board thermal resistance · p. 5
- Data rate, most
- 420 Mbit/s · 3.3V to 5V translation max · p. 13
What it is and has
6- Function
- Single-bit, dual-supply, noninverting voltage level transceiver · p. 13
- Supply rails
- Two independently configurable rails, each 1.65V to 5.5V · p. 13
- Maximum data rate
- 420Mbps, 3.3V to 5V translation · p. 13
- Partial power-down
- Ioff disables inputs and outputs to prevent current backflow when powered down · p. 13
- Outputs
- Balanced high-drive CMOS push-pull · p. 13
- Supply sequencing
- Either rail may be powered on or off in any order without I/O glitches · p. 13
Specifications
266| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCCA | min -0.5 · max 6.5 V | 4 | |
| Input voltage VI | min -0.5 · max 6.5 V | 4 | |
| Voltage range applied to any output in the high-impedance or power-off state VO | min -0.5 · max 6.5 V | 4 | |
| Voltage range applied to any output in the high or low state VO | A port; maximum VCCA + 0.5 V | min -0.5 V | 4 |
| Voltage range applied to any output in the high or low state VO | B port; maximum VCCB + 0.5 V | min -0.5 V | 4 |
| Input clamp current IIK | VI < 0 | max -50 mA | 4 |
| Output clamp current IOK | VO < 0 | max -50 mA | 4 |
| Continuous output current IO | ±50 mA | max 50 mA | 4 |
| Continuous current through VCC or GND | ±100 mA | max 100 mA | 4 |
| Junction temperature TJ | max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 V | max 1000 V | 4 |
| Electrostatic discharge V(ESD) | Machine Model; ±200 V | max 200 V | 4 |
| Supply voltage VCCA | min 1.65 · max 5.5 V | 4 | |
| Supply voltage VCCB | min 1.65 · max 5.5 V | 4 | |
| High-level input voltage VIH | Data inputs; VCCI = 2.3 to 2.7V | min 1.7 V | 4 |
| High-level input voltage VIH | Data inputs; VCCI = 3 to 3.6V | min 2 V | 4 |
| Low-level input voltage VIL | Data inputs; VCCI = 2.3 to 2.7V | max 0.7 V | 4 |
| Low-level input voltage VIL | Data inputs; VCCI = 3 to 3.6V | max 0.8 V | 4 |
| High-level input voltage VIH | DIR, referenced to VCCA; VCCI = 2.3 to 2.7V | min 1.7 V | 4 |
| High-level input voltage VIH | DIR, referenced to VCCA; VCCI = 3 to 3.6V | min 2 V | 4 |
| Low-level input voltage VIL | DIR, referenced to VCCA; VCCI = 2.3 to 2.7V | max 0.7 V | 5 |
| Low-level input voltage VIL | DIR, referenced to VCCA; VCCI = 3 to 3.6V | max 0.8 V | 5 |
| Input voltage VI | min 0 · max 5.5 V | 5 | |
| Output voltage VO | Maximum VCCO | min 0 V | 5 |
| High-level output current IOH | VCCO = 1.65 to 1.95V | max -4 mA | 5 |
| High-level output current IOH | VCCO = 2.3 to 2.7V | max -8 mA | 5 |
| High-level output current IOH | VCCO = 3 to 3.6V | max -24 mA | 5 |
| High-level output current IOH | VCCO = 4.5 to 5.5V | max -32 mA | 5 |
| Low-level output current IOL | VCCO = 1.65 to 1.95V | max 4 mA | 5 |
| Low-level output current IOL | VCCO = 2.3 to 2.7V | max 8 mA | 5 |
| Low-level output current IOL | VCCO = 3 to 3.6V | max 24 mA | 5 |
| Low-level output current IOL | VCCO = 4.5 to 5.5V | max 32 mA | 5 |
| Input transition rise or fall rate Δt/Δv | Data inputs; VCCI = 1.65 to 1.95V | max 20 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | Data inputs; VCCI = 2.3 to 2.7V | max 20 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | Data inputs; VCCI = 3 to 3.6V | max 10 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | Data inputs; VCCI = 4.5 to 5.5V | max 5 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | Control inputs; VCCI = 1.65 to 5.5V | max 5 ns/V | 5 |
| Operating free-air temperature TA | min -40 · max 85 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | DBV (SOT-23), 6 pins | typ 215.1 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DBV (SOT-23), 6 pins | typ 136.5 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DBV (SOT-23), 6 pins | typ 96.6 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DBV (SOT-23), 6 pins | typ 71.5 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DBV (SOT-23), 6 pins | typ 96.3 °C/W | 5 |
| VOH VOH | IOH = –4mA, VI = VIH; VCCA = VCCB = 1.65V | min 1.2 V | 6 |
| VOH VOH | IOH = –8mA, VI = VIH; VCCA = VCCB = 2.3V | min 1.9 V | 6 |
| VOH VOH | IOH = –24mA, VI = VIH; VCCA = VCCB = 3V | min 2.4 V | 6 |
| VOH VOH | IOH = –32mA, VI = VIH; VCCA = VCCB = 4.5V | min 3.8 V | 6 |
| VOL VOL | IOL = 100uA, VI = VIL; VCCA = VCCB = 1.65 to 4.5V | max 0.1 V | 6 |
| VOL VOL | IOL = 4mA, VI = VIL; VCCA = VCCB = 1.65V | max 0.45 V | 6 |
| VOL VOL | IOL = 8mA, VI = VIL; VCCA = VCCB = 2.3V | max 0.3 V | 6 |
| VOL VOL | IOL = 24mA, VI = VIL; VCCA = VCCB = 3V | max 0.55 V | 6 |
| VOL VOL | IOL = 32mA, VI = VIL; VCCA = VCCB = 4.5V | max 0.55 V | 6 |
| II II | DIR; VI = VCCA or GND; VCCA = VCCB = 1.65 to 5.5V; TA = 25 °C; ±1 uA | max 1 uA | 6 |
| II II | DIR; VI = VCCA or GND; VCCA = VCCB = 1.65 to 5.5V; TA = –40 to +85°C; ±2 uA | max 2 uA | 6 |
| Ioff Ioff | A port; VI or VO = 0 to 5.5V; VCCA = 0V, VCCB = 0 to 5.5V; TA = 25 °C; ±1 uA | max 1 uA | 6 |
| Ioff Ioff | A port; VI or VO = 0 to 5.5V; VCCA = 0V, VCCB = 0 to 5.5V; TA = –40 to +85°C; ±2 uA | max 2 uA | 6 |
| Ioff Ioff | B port; VI or VO = 0 to 5.5V; VCCA = 0 to 5.5V, VCCB = 0V; TA = 25 °C; ±1 uA | max 1 uA | 6 |
| Ioff Ioff | B port; VI or VO = 0 to 5.5V; VCCA = 0 to 5.5V, VCCB = 0V; TA = –40 to +85°C; ±2 uA | max 2 uA | 6 |
| IOZ IOZ | A or B port; VO = VCCO or GND; VCCA = VCCB = 1.65 to 5.5V; TA = 25 °C; ±1 uA | max 1 uA | 6 |
| IOZ IOZ | A or B port; VO = VCCO or GND; VCCA = VCCB = 1.65 to 5.5V; TA = –40 to +85°C; ±2 uA | max 2 uA | 6 |
| ICCA ICCA | VI = VCCI or GND, IO = 0; VCCA = VCCB = 1.65 to 5.5V | max 3 uA | 6 |
| ICCA ICCA | VI = VCCI or GND, IO = 0; VCCA = 5.5V, VCCB = 0V | max 2 uA | 6 |
| ICCA ICCA | VI = VCCI or GND, IO = 0; VCCA = 0V, VCCB = 5.5V | max -2 uA | 6 |
| ICCB ICCB | VI = VCCI or GND, IO = 0; VCCA = VCCB = 1.65 to 5.5V | max 3 uA | 6 |
| ICCB ICCB | VI = VCCI or GND, IO = 0; VCCA = 5.5V, VCCB = 0V | max -2 uA | 6 |
| ICCB ICCB | VI = VCCI or GND, IO = 0; VCCA = 0V, VCCB = 5.5V | max 2 uA | 6 |
| ICCA + ICCB ICCA + ICCB | VI = VCCI or GND, IO = 0; VCCA = VCCB = 1.65 to 5.5V; see Table 7-1 | max 4 uA | 6 |
| ΔICCA ΔICCA | A port at VCCA – 0.6V, DIR at VCCA, B port = open; VCCA = VCCB = 3 to 5.5V | max 50 uA | 6 |
| ΔICCA ΔICCA | DIR at VCCA – 0.6V, B port = open, A port at VCCA or GND; VCCA = VCCB = 3 to 5.5V | max 50 uA | 6 |
| ΔICCB ΔICCB | B port at VCCB – 0.6V, DIR at GND, A port = open; VCCA = VCCB = 3 to 5.5V | max 50 uA | 6 |
| Ci Ci | DIR; VI = VCCA or GND; VCCA = VCCB = 3.3V; TA = 25 °C | typ 2.5 pF | 6 |
| Cio Cio | A or B port; VO = VCCA/B or GND; VCCA = VCCB = 3.3V; TA = 25 °C | typ 6 pF | 6 |
| tPLH tPLH | A to B; VCCB = 1.8V ±0.15V | min 3 · max 17.7 ns | 7 |
| tPLH tPLH | A to B; VCCB = 2.5V ±0.2V | min 2.2 · max 10.3 ns | 7 |
| tPLH tPLH | A to B; VCCB = 3.3V ±0.3V | min 1.7 · max 8.3 ns | 7 |
| tPLH tPLH | A to B; VCCB = 5V ±0.5V | min 1.4 · max 7.2 ns | 7 |
| tPHL tPHL | A to B; VCCB = 1.8V ±0.15V | min 2.8 · max 14.3 ns | 7 |
| tPHL tPHL | A to B; VCCB = 2.5V ±0.2V | min 2.2 · max 8.5 ns | 7 |
| tPHL tPHL | A to B; VCCB = 3.3V ±0.3V | min 1.8 · max 7.1 ns | 7 |
| tPHL tPHL | A to B; VCCB = 5V ±0.5V | min 1.7 · max 7 ns | 7 |
| tPLH tPLH | B to A; VCCB = 1.8V ±0.15V | min 3 · max 17.7 ns | 7 |
| tPLH tPLH | B to A; VCCB = 2.5V ±0.2V | min 2.3 · max 16 ns | 7 |
| tPLH tPLH | B to A; VCCB = 3.3V ±0.3V | min 2.1 · max 15.5 ns | 7 |
| tPLH tPLH | B to A; VCCB = 5V ±0.5V | min 1.9 · max 15.1 ns | 7 |
| tPHL tPHL | B to A; VCCB = 1.8V ±0.15V | min 2.8 · max 14.3 ns | 7 |
| tPHL tPHL | B to A; VCCB = 2.5V ±0.2V | min 2.1 · max 12.9 ns | 7 |
| tPHL tPHL | B to A; VCCB = 3.3V ±0.3V | min 2 · max 12.6 ns | 7 |
| tPHL tPHL | B to A; VCCB = 5V ±0.5V | min 1.8 · max 12.2 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 1.8V ±0.15V | min 5.2 · max 19.4 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 2.5V ±0.2V | min 4.8 · max 18.5 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 3.3V ±0.3V | min 4.7 · max 18.4 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 5V ±0.5V | min 5.1 · max 17.1 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 1.8V ±0.15V | min 2.3 · max 10.5 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 2.5V ±0.2V | min 2.1 · max 10.5 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 3.3V ±0.3V | min 2.4 · max 10.7 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 5V ±0.5V | min 3.1 · max 10.9 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 1.8V ±0.15V | min 5.2 · max 21.9 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 2.5V ±0.2V | min 4.9 · max 11.5 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 3.3V ±0.3V | min 4.6 · max 10.3 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 5V ±0.5V | min 2.8 · max 8.2 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 1.8V ±0.15V | min 4.2 · max 16 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 2.5V ±0.2V | min 3.7 · max 9.2 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 3.3V ±0.3V | min 3.3 · max 8.4 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 5V ±0.5V | min 2.4 · max 6.4 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 33.7 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 25.2 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 23.9 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 21.5 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 36.2 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 24.4 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 22.9 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 20.4 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 28.2 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 20.8 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 19 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 18.1 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 33.7 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 27 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 25.5 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 24.1 ns | 7 |
| tPLH tPLH | A to B; VCCB = 1.8V ±0.15V | min 2.3 · max 16 ns | 7 |
| tPLH tPLH | A to B; VCCB = 2.5V ±0.2V | min 1.5 · max 8.5 ns | 7 |
| tPLH tPLH | A to B; VCCB = 3.3V ±0.3V | min 1.3 · max 6.4 ns | 7 |
| tPLH tPLH | A to B; VCCB = 5V ±0.5V | min 1.1 · max 5.1 ns | 7 |
| tPHL tPHL | A to B; VCCB = 1.8V ±0.15V | min 2.1 · max 12.9 ns | 7 |
| tPHL tPHL | A to B; VCCB = 2.5V ±0.2V | min 1.4 · max 7.5 ns | 7 |
| tPHL tPHL | A to B; VCCB = 3.3V ±0.3V | min 1.3 · max 5.4 ns | 7 |
| tPHL tPHL | A to B; VCCB = 5V ±0.5V | min 0.9 · max 4.6 ns | 7 |
| tPLH tPLH | B to A; VCCB = 1.8V ±0.15V | min 2.2 · max 10.3 ns | 7 |
| tPLH tPLH | B to A; VCCB = 2.5V ±0.2V | min 1.5 · max 8.5 ns | 7 |
| tPLH tPLH | B to A; VCCB = 3.3V ±0.3V | min 1.4 · max 8 ns | 7 |
| tPLH tPLH | B to A; VCCB = 5V ±0.5V | min 1 · max 7.5 ns | 7 |
| tPHL tPHL | B to A; VCCB = 1.8V ±0.15V | min 2.2 · max 8.5 ns | 7 |
| tPHL tPHL | B to A; VCCB = 2.5V ±0.2V | min 1.4 · max 7.5 ns | 7 |
| tPHL tPHL | B to A; VCCB = 3.3V ±0.3V | min 1.3 · max 7 ns | 7 |
| tPHL tPHL | B to A; VCCB = 5V ±0.5V | min 0.9 · max 6.2 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 1.8V ±0.15V | min 3 · max 8.1 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 2.5V ±0.2V | min 3.1 · max 8.1 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 3.3V ±0.3V | min 2.8 · max 8.1 ns | 7 |
| tPHZ tPHZ | DIR to A; VCCB = 5V ±0.5V | min 3.2 · max 8.1 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 1.8V ±0.15V | min 1.3 · max 5.9 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 2.5V ±0.2V | min 1.3 · max 5.9 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 3.3V ±0.3V | min 1.3 · max 5.9 ns | 7 |
| tPLZ tPLZ | DIR to A; VCCB = 5V ±0.5V | min 1 · max 5.8 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 1.8V ±0.15V | min 5.2 · max 23.7 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 2.5V ±0.2V | min 4.1 · max 11.4 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 3.3V ±0.3V | min 3.9 · max 10.2 ns | 7 |
| tPHZ tPHZ | DIR to B; VCCB = 5V ±0.5V | min 2.4 · max 7.1 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 1.8V ±0.15V | min 3.9 · max 18.9 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 2.5V ±0.2V | min 3.2 · max 9.6 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 3.3V ±0.3V | min 2.8 · max 8.4 ns | 7 |
| tPLZ tPLZ | DIR to B; VCCB = 5V ±0.5V | min 1.8 · max 5.3 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 29.2 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 18.1 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 16.4 ns | 7 |
| tPZH tPZH | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 12.8 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 32.2 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 18.9 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 17.2 ns | 7 |
| tPZL tPZL | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 13.3 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 21.9 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 14.4 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 12.3 ns | 7 |
| tPZH tPZH | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 10.9 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 21 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 15.6 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 13.5 ns | 7 |
| tPZL tPZL | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 12.7 ns | 7 |
| tPLH tPLH | A to B; VCCB = 1.8V ±0.15V | min 2.1 · max 15.5 ns | 8 |
| tPLH tPLH | A to B; VCCB = 2.5V ±0.2V | min 1.4 · max 8 ns | 8 |
| tPLH tPLH | A to B; VCCB = 3.3V ±0.3V | min 0.7 · max 5.8 ns | 8 |
| tPLH tPLH | A to B; VCCB = 5V ±0.5V | min 0.7 · max 4.4 ns | 8 |
| tPHL tPHL | A to B; VCCB = 1.8V ±0.15V | min 2 · max 12.6 ns | 8 |
| tPHL tPHL | A to B; VCCB = 2.5V ±0.2V | min 1.3 · max 7 ns | 8 |
| tPHL tPHL | A to B; VCCB = 3.3V ±0.3V | min 0.8 · max 5 ns | 8 |
| tPHL tPHL | A to B; VCCB = 5V ±0.5V | min 0.7 · max 4 ns | 8 |
| tPLH tPLH | B to A; VCCB = 1.8V ±0.15V | min 1.7 · max 8.3 ns | 8 |
| tPLH tPLH | B to A; VCCB = 2.5V ±0.2V | min 1.3 · max 6.4 ns | 8 |
| tPLH tPLH | B to A; VCCB = 3.3V ±0.3V | min 0.7 · max 5.8 ns | 8 |
| tPLH tPLH | B to A; VCCB = 5V ±0.5V | min 0.6 · max 5.4 ns | 8 |
| tPHL tPHL | B to A; VCCB = 1.8V ±0.15V | min 1.8 · max 7.1 ns | 8 |
| tPHL tPHL | B to A; VCCB = 2.5V ±0.2V | min 1.3 · max 5.4 ns | 8 |
| tPHL tPHL | B to A; VCCB = 3.3V ±0.3V | min 0.8 · max 5 ns | 8 |
| tPHL tPHL | B to A; VCCB = 5V ±0.5V | min 0.7 · max 4.5 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 1.8V ±0.15V | min 2.9 · max 7.3 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 2.5V ±0.2V | min 3 · max 7.3 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 3.3V ±0.3V | min 2.8 · max 7.3 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 5V ±0.5V | min 3.4 · max 7.3 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 1.8V ±0.15V | min 1.8 · max 5.6 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 2.5V ±0.2V | min 1.6 · max 5.6 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 3.3V ±0.3V | min 2.2 · max 5.7 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 5V ±0.5V | min 2.2 · max 5.7 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 1.8V ±0.15V | min 5.4 · max 20.5 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 2.5V ±0.2V | min 3.9 · max 10.1 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 3.3V ±0.3V | min 2.9 · max 8.8 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 5V ±0.5V | min 2.4 · max 6.8 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 1.8V ±0.15V | min 3.3 · max 14.5 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 2.5V ±0.2V | min 2.9 · max 7.8 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 3.3V ±0.3V | min 2.4 · max 7.1 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 5V ±0.5V | min 1.7 · max 4.9 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 22.8 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 14.2 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 12.9 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 10.3 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 27.6 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 15.5 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 13.8 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 11.3 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 21.1 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 13.6 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 11.5 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 10.1 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 19.9 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 14.3 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 12.3 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 11.3 ns | 8 |
| tPLH tPLH | A to B; VCCB = 1.8V ±0.15V | min 1.9 · max 15.1 ns | 8 |
| tPLH tPLH | A to B; VCCB = 2.5V ±0.2V | min 1 · max 7.5 ns | 8 |
| tPLH tPLH | A to B; VCCB = 3.3V ±0.3V | min 0.6 · max 5.4 ns | 8 |
| tPLH tPLH | A to B; VCCB = 5V ±0.5V | min 0.5 · max 3.9 ns | 8 |
| tPHL tPHL | A to B; VCCB = 1.8V ±0.15V | min 1.8 · max 12.2 ns | 8 |
| tPHL tPHL | A to B; VCCB = 2.5V ±0.2V | min 0.9 · max 6.2 ns | 8 |
| tPHL tPHL | A to B; VCCB = 3.3V ±0.3V | min 0.7 · max 4.5 ns | 8 |
| tPHL tPHL | A to B; VCCB = 5V ±0.5V | min 0.5 · max 3.5 ns | 8 |
| tPLH tPLH | B to A; VCCB = 1.8V ±0.15V | min 1.4 · max 7.2 ns | 8 |
| tPLH tPLH | B to A; VCCB = 2.5V ±0.2V | min 1 · max 5.1 ns | 8 |
| tPLH tPLH | B to A; VCCB = 3.3V ±0.3V | min 0.7 · max 4.4 ns | 8 |
| tPLH tPLH | B to A; VCCB = 5V ±0.5V | min 0.5 · max 3.9 ns | 8 |
| tPHL tPHL | B to A; VCCB = 1.8V ±0.15V | min 1.7 · max 7 ns | 8 |
| tPHL tPHL | B to A; VCCB = 2.5V ±0.2V | min 0.9 · max 4.6 ns | 8 |
| tPHL tPHL | B to A; VCCB = 3.3V ±0.3V | min 0.7 · max 4 ns | 8 |
| tPHL tPHL | B to A; VCCB = 5V ±0.5V | min 0.5 · max 3.5 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 1.8V ±0.15V | min 2.1 · max 5.4 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 2.5V ±0.2V | min 2.2 · max 5.4 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 3.3V ±0.3V | min 2.2 · max 5.5 ns | 8 |
| tPHZ tPHZ | DIR to A; VCCB = 5V ±0.5V | min 2.2 · max 5.4 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 1.8V ±0.15V | min 0.9 · max 3.8 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 2.5V ±0.2V | min 1 · max 3.8 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 3.3V ±0.3V | min 0.7 · max 3.7 ns | 8 |
| tPLZ tPLZ | DIR to A; VCCB = 5V ±0.5V | min 0.7 · max 3.7 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 1.8V ±0.15V | min 4.8 · max 20.2 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 2.5V ±0.2V | min 2.5 · max 9.8 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 3.3V ±0.3V | min 1 · max 8.5 ns | 8 |
| tPHZ tPHZ | DIR to B; VCCB = 5V ±0.5V | min 2.5 · max 6.5 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 1.8V ±0.15V | min 3.2 · max 14.8 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 2.5V ±0.2V | min 2.5 · max 7.4 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 3.3V ±0.3V | min 2.5 · max 7 ns | 8 |
| tPLZ tPLZ | DIR to B; VCCB = 5V ±0.5V | min 1.6 · max 4.5 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 22 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 12.5 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 11.4 ns | 8 |
| tPZH tPZH | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 8.4 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 1.8V ±0.15V; calculated enable time | max 27.2 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 2.5V ±0.2V; calculated enable time | max 14.4 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 3.3V ±0.3V; calculated enable time | max 12.5 ns | 8 |
| tPZL tPZL | DIR to A; VCCB = 5V ±0.5V; calculated enable time | max 10 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 18.9 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 11.3 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 9.1 ns | 8 |
| tPZH tPZH | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 7.6 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 1.8V ±0.15V; calculated enable time | max 17.6 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 2.5V ±0.2V; calculated enable time | max 11.6 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 3.3V ±0.3V; calculated enable time | max 10 ns | 8 |
| tPZL tPZL | DIR to B; VCCB = 5V ±0.5V; calculated enable time | max 8.6 ns | 8 |
Pins, by the datasheet
6- 1 VCCA
- SYSTEM-1 supply voltage, 1.65V to 5.5V. · p. 2
- 2 GND
- Device GND. · p. 2
- 3 A
- Output level depends on VCC1 voltage. · p. 2
- 4 B
- Input threshold value depends on VCC2 voltage. · p. 2
- 5 DIR
- GND (low level) determines B-port to A-port direction. · p. 2
- 6 VCCB
- SYSTEM-2 supply voltage, 1.65V to 5.5V. · p. 2
- 4 layers70 × 54 mm

- 6 layers80 × 49 mm

ButterStick
butterstick-fpga/butterstick-hardware
Basic ECP5 based GigE to SYZYGY interface.
256 parts225 - 4 layers35 × 85 mm

Vimdrones esc development board
VimDrones/AM32_esc_development_board
Open Source AM32 ESC development board
95 parts44GPL-3.0 - 2 layers30.4 × 12.7 mm

- 2 layers84.2 × 100 mm

Fabpack out v5 8
yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)
126 parts41 - 4 layers21 × 21 mm

- 2 layers182.6 × 130.9 mm

Blackmacro base
KipJM/blackmacro-hardware
An open source, smaller, more configurable, and more capabable video editing keyboard based on the raspberry Pi Pico 2W.
189 parts29CERN-OHL-W-2.0 - 2 layers196.9 × 114.3 mm

CobraPin v1 00
cobra18t/CobraPin
Pinball Controller based on OPP and designed for use with MPF
243 parts17GPL-3.0
Parts like it
874LVC1T45W6
SOT-26-40℃~+125℃ 1 1 1.65V~5.5V 1.65V~5.5V Bidirectional Power-Off Protection Tri-State SOT-26 Translators, Level Shifters ROHSDiodes IncorporatedTranslators, Level ShiftersTXS0101DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~3.6V 2.3V~5.5V 24Mbps Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersSN74AXC1T45DBV
SOT-23-6-40℃~+125℃ 1 1 500Mbps 650mV~3.6V 650mV~3.6V Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersSN74LXC1T45DBV
SOT-23-6-40℃~+125℃ 1 1 1.1V~5.5V 1.1V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersLV3842XDBV
SOT-23-6-40℃~+125℃ SOT-23-6 DC-DC Converters ROHSTexas InstrumentsTranslators, Level ShiftersTXU0101DBV
SOT-23-6-40℃~+125℃ 1 1 1.1V~5.5V 1.1V~5.5V 12mA 12mA 200Mbps Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersETA1038S2G
SOT23-6-40℃~+85℃ 1 1.5A 1.8V~5V 40uA 700kHz~1.3MHz Adjustable Boost Boost Built-in Yes SOT23-6 DC-DC Converters ROHSetasolutionTranslators, Level ShiftersSN74LVC1T45DB(LX)
SOT-23-6-40℃~+125℃ 1 1 1.2V~5.5V 1.2V~5.5V 420Mbps Bidirectional Power-Off Protection Tri-State SOT-23-6 Translators, Level Shifters ROHSlingxingicTranslators, Level Shifters
Questions
Is there a KiCad symbol and footprint for the SN74LVC1T45DBV?
Yes. The symbol is Logic_LevelTranslator:SN74LVC1T45DBV and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC1T45DBV?
SOT-23-6, with 6 pins. Its footprint is drawn on this page.
Where is the SN74LVC1T45DBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC1T45DBV?
JLCPCB lists it as part C7843, with 232,146 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC1T45DBV?
Parts like it in the library: the 74LVC1T45W6 by Diodes Incorporated, the TXS0101DBV by Texas Instruments, the SN74AXC1T45DBV by Texas Instruments and the SN74LXC1T45DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN74LVC1T45DBV?
120 boards in 100 repositories on GitHub; the most starred are listed on this page, with their KiCad files.