4 layers100 × 100 mm
4 layers100 × 100 mm
OrangePie
ArthorH/ModuCard-OrangePieOrange Pi 5 pro adapter board for ModuCard System
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 166
- Nets
- 236
- Pads
- 679
- Tracks, vias
- 935, 211
- Pours
- 35
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Feb 2025
- Updated
- 12 Jul 2026
Overview
OrangePie is an open-source printed circuit board by ArthorH, from the ArthorH/ModuCard-OrangePie repository on GitHub. It is a 4-layer board of 100 × 100 mm with 166 parts on 236 nets, routed with 935 tracks and 211 vias.
It is built around the CH340G, TPD2E2U06DCK and AMS1117-3.3, with the CH334R, AO3400A and AO3401A among its other parts. Its parts include 58 resistors, 57 capacitors, 13 ICs, 10 transistors and 5 connectors. It belongs with the STM32 boards of this library.
Main components
9
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
TPD2E2U06DCK
SC-70-3-40℃~+125℃ 1.5pF 10nA 12.4V 2 5.5A@8/20us 5.5V 6.5V 75W@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5 TVS SC-70-3 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CH334R
QSOP-16-150mil-40℃~+85℃ 0.4mA 3.3V、5V 4 480Mbps 85mA Hub I2C USB 2.0 QSOP-16-150mil USB HUB Controllers ROHSWCH (Nanjing Qinheng Microelectronics)USB HUB Controllers
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
1N4002W
SOD-123FLDiodes - General PurposehongjiachengTL2243
插件-20℃~+70℃ 1.8N 12V 3.8mm 30,000 cycles 50mA 7.3mm 9.6mm PC Pin Right Angle Round Button SPST 插件 Tactile Switches ROHSE-SwitchTactile Switches
X322512MSB4SI
SMD3225-4P-40℃~+85℃ 12MHz 20pF 80Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
README
README.mdModuCard System Orange PI 5 pro adapter
Project Status: Ongoing
REV C
Design ⏳ — Fabrication ⏳ — Assembly ⏳ — Bringup ⏳ — Testing ⏳
REV B
Design ✅ — Fabrication ✅ — Assembly ✅ — Bringup ✅ — Testing ⛔ Failed: https://github.com/ArthorH/ModuCard-OrangePie/issues/6
REV A
Design ✅ — Fabrication ✅ — Assembly ✅ — Bringup ✅ — Testing done ✅
Key technologies:
Features
- 5V 8A psu for Orange PI
- Embedded USB audo interface
- Embedded USB CAN adapter
- External Fan controller
- UART debug interface
Block Diagram
Manufactured board
Moducard OrangePie in Zwentendorf Austria!
Check out other projects
Orange Pie -> https://github.com/ArthorH/ModuCard-OrangePie
ModuCard Base module -> https://github.com/ArthorH/ModuCard-base-module
ModuCard Backplane -> https://github.com/ArthorH/ModuCard-backplane
Author
Artem Horiunov
License
To be added
Parts
166| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100nF | PCM_JLCPCB:C_0402 | C11, C16, C17, C18, C19, C20, C21, C22, C23, C28, C29, C30, C31, C32, C36, C51 +6 |
| 17 | 10kΩ | PCM_JLCPCB:R_0402 | R2, R6, R12, R13, R18, R26, R38, R39, R41, R46, R47, R48, R51, R52, R53, R54 +1 |
| 12 | 22Ω | PCM_JLCPCB:R_0402 | R14, R15, R29, R30, R42, R43, R44, R45, R49, R55, R56, R59 |
| 7 | 10uF | PCM_JLCPCB:C_0603 | C8, C12, C13, C58, C61, C62, C63 |
| 7 | 1uF | PCM_JLCPCB:C_0402 | C14, C34, C35, C38, C39, C42, C46 |
| 7 | AO3400A | PCM_JLCPCB:Q_SOT-23 | Q1, Q2, Q4, Q5, Q7, Q10, Q12 |
| 6 | 0Ω | PCM_JLCPCB:R_0402 | R20, R21, R23, R24, R34, R35 |
| 4 | 10uF | PCM_JLCPCB:C_0805 | C33, C37, C40, C56 |
| 3 | 1.5kΩ | PCM_JLCPCB:R_0402 | R19, R22, R25 |
| 3 | 10uF | PCM_JLCPCB:C_0402 | C24, C45, C47 |
| 3 | 1kΩ | PCM_JLCPCB:R_0402 | R5, R31, R33 |
| 3 | 499k | PCM_JLCPCB:R_0402 | R4, R7, R36 |
| 3 | AO3401A | PCM_JLCPCB:Q_SOT-23 | Q6, Q9, Q11 |
| 2 | 100nF 50V Y5V | Capacitor_SMD:C_0402_1005Metric | C26, C27 |
| 2 | 100Ω | PCM_JLCPCB:R_0402 | R8, R37 |
| 2 | 10uF | PCM_JLCPCB:C_1206 | C6, C49 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 20kΩ | PCM_JLCPCB:R_0402 | R32, R40 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C53, C54 |
| 2 | 220Ω | PCM_JLCPCB:R_0402 | R16, R17 |
| 2 | 22uF | PCM_JLCPCB:C_0805 | C10, C57 |
| 2 | 33pF | PCM_JLCPCB:C_0402 | C43, C44 |
| 2 | 47uF 50V RVT1H470M0607 | Capacitor_SMD:CP_Elec_6.3x7.7 | C41, C48 |
| 2 | 5.1kΩ | PCM_JLCPCB:R_0402 | R27, R28 |
| 2 | LM74700 | Package_TO_SOT_SMD:SOT-23-6 | U4, U5 |
| 2 | TJA1044GTK_3Z | Package_SON:HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm | U6, U7 |
| 2 | TPD2E2U06DCK | Package_TO_SOT_SMD:SOT-323_SC-70 | U402, U403 |
| 1 | 09031967921 | Connector_DIN:DIN41612_R_3x32_Female_Horizontal_THT | J1 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C25 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12MHz C7424717 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 1MΩ | PCM_JLCPCB:R_0402 | R50 |
| 1 | 1N4002W | PCM_JLCPCB:D_SOD-123FL | D4 |
| 1 | 1uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L2 |
| 1 | 2.2kΩ | PCM_JLCPCB:R_0402 | R1 |
| 1 | 4.7uF | PCM_JLCPCB:C_0402 | C15 |
| 1 | 73k2 | PCM_JLCPCB:R_0402 | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U13 |
| 1 | CH334R | Package_SO:QSOP-16_3.9x4.9mm_P0.635mm | U10 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U11 |
| 1 | Fan | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | M1 |
| 1 | FixLed307 | FixLed307:FixLed307 | LED1 |
| 1 | G*** | kibuzzard-67B7C241 | kibuzzard-67B7C241 |
| 1 | G*** | kibuzzard-67B7B9C6 | kibuzzard-67B7B9C6 |
| 1 | G*** | kibuzzard-67B7BFDD | kibuzzard-67B7BFDD |
| 1 | G*** | kibuzzard-67B7B9BD | kibuzzard-67B7B9BD |
| 1 | G*** | kibuzzard-67B7BB29 | kibuzzard-67B7BB29 |
| 1 | G*** | kibuzzard-67B7BD37 | kibuzzard-67B7BD37 |
| 1 | G*** | kibuzzard-67B7C21F | kibuzzard-67B7C21F |
| 1 | G*** | kibuzzard-67B62470 | kibuzzard-67B62470 |
| 1 | G*** | kibuzzard-68D47811 | kibuzzard-68D47811 |
| 1 | G*** | kibuzzard-68D47809 | kibuzzard-68D47809 |
| 1 | G*** | kibuzzard-68D4781A | kibuzzard-68D4781A |
| 1 | Green | PCM_JLCPCB:D_0603 | D3 |
| 1 | JST XH | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J3 |
| 1 | Orange pi 5 pro | OrangePi Pro 5:Orange Pi 5 pro | J2 |
| 1 | PCM2704CDBR | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U9 |
| 1 | Programming header | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J4 |
| 1 | RM065 1Meg | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | SIC431AED-T1-GE3 | SIC471:REGULATOR_SIC431AED-T1-GE3 | U2 |
| 1 | STM32G431C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | Solder Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TDA7052A | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | TL2243 | TL2243:TL2243 | BTN1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
| 1 | X322512MSB4SI | PCM_JLCPCB:CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | Yellow | PCM_JLCPCB:D_0603 | D1 |
Similar boards
- 4 layers130 × 105 mm
HomeDeck
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
228 parts1 - 4 layers100 × 100 mm
- 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers105 × 82 mm
Module 16S
botaneta/All-in-one-diybms
Proyecto de módulo para lectura y balanceo de celdas hasta 16S
244 parts - 2 layers25 × 99 mm
Cremini blade atmega328p
nicklasfrahm/mykilio
Mykilio is the proposal for a new Living Standard with the goal to reimagine infrastructure management and monitoring.
102 parts1MIT - 2 layers103.9 × 43.5 mm
- 4 layers53.3 × 85.1 mm
Questions
How big is the OrangePie PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.61 mm thick.
What parts does the OrangePie use?
166 parts, built around the CH340G, TPD2E2U06DCK, AMS1117-3.3 and CH334R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OrangePie KiCad files?
From the ArthorH/ModuCard-OrangePie repository on GitHub, at the commit this page was made from: the board is PCB source/OrangePie.kicad_pcb and its schematic PCB source/5v buck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OrangePie design in my own project?
Its repository states no licence, so its author keeps all rights: ask ArthorH before reusing the design.