Boards using the TLV76133DCY

32 boards

Boards in 27 GitHub repositories, designed in KiCad, that use the TLV76133DCY by Texas Instruments (-40℃~+125℃ 1 1.6V@(1A) 16V 1A 3.3V 60dB@(1kHz) 60uA 60uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the TLV76133DCY’s symbol, footprint and pinout are on its own page.

2 layers100 × 63.7 mm
Fcart
hi0t/fcart
Open source flash cartridge
115 parts23GPL-3.0
2 layers109.5 × 51 mm
CANBOB (MAGE CANBOB-003)
Mage-Control-Systems-Ltd/CANBOB
A breakout board that enables USB or SPI to CAN communication using the MCP2515.
98 parts8CC-BY-4.0
4 layers87.4 × 175.5 mm
TM MUX Board REV B
emilefarine/redpitaya-afm
master project, low cost solution for afm acquisition
183 parts1MIT
2 layers105 × 107.2 mm
Ittypda
ingobeans/ittypda
An itty-bitty PDA with a touch of whimsy !!! :3
175 parts1
4 layers49 × 49 mm
GLITCHING FMAW
wicware/multitool
Glitching tool with examples
77 parts1
4 layers170 × 80 mm
UMTK
AmorphousX/UMTK
Code for running UMTK
99 partsCC0-1.0
2 layers69.6 × 26.4 mm
ESP32-C6-DevBoard
Ekmansoft/ESP32-C6-DevBoard-1
ESP32 Devboard test
43 partsMIT
4 layers49 × 49 mm
GLITCHING FMAW
fmaw/multitool

72 parts
4 layers180 × 70 mm
Bt pcb
giacomo-ascari/busy-toad
Stereophonic sound fx processor with line/instrument support, plus dedicated stereo headphone output.
237 parts
2 layers54 × 34 mm
Testing2
GKevinLi/babys-first-pcb
An ESP32 devboard designed to be a drone flight controller. Includes a gyro, accelerometer, and a buck converter to step down drone battery voltage (14.8v) to 5v.
39 parts
2 layers446.9 × 141.7 mm
Person keyboard
jtljac/person-keyboard
My personal Keyboard Design
374 parts
4 layers144 × 133 mm
TerkaPCB
kaszmirek/TerkaPCB

99 parts
4 layers88 × 57 mm
Measurement Board
marionas01/Global_Resist_Electronics
This Repo contains the Schematics and PCB files for the various electronic components designed to measure and control the EvolChip Bioreactor used in the Global Resist Project.
87 parts
2 layers165 × 135 mm
Countdown timer
MartinCowen/countdown-timer-hardware
Child-friendly Countdown Timer: KiCad projects for PCB and Front Panel
111 partsMIT
4 layers85.5 × 54.5 mm
Adc fpga
prydin/hdr
Hardware Defined Radio
49 parts
2 layers56.4 × 140 mm
Control Board
sarahGruber6/Litter-Robot-3-Upgrade
Upgrade/Replacement Control Board and other improvements
36 parts
4 layers100 × 50 mm
Controller
usbalbin/hw-half-bridge

226 parts
2 layers130.8 × 92.7 mm
Junior design
WayneGretzky1/EE-3951W
You will be designing and building a weight scale using a pre-built strain gauge bridge as shown in the link below:
37 parts
4 layers90 × 124.3 mm
Duck
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
94 parts915
4 layers106 × 66.8 mm
Molenet V6.3 15 05 25
ComNets-Bremen/MoleNet
MoleNet: A Wireless Underground Sensor Network platform
71 parts13GPL-3.0
2 layers40.8 × 55 mm
Daughterboard
lutetjeff/popn2
pop'n controller v2
18 parts3BSD-3-Clause
4 layers150 × 120 mm
Pi usb port switch
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
197 parts3MIT
2 layers75 × 55 mm
Dolby
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
91 parts1
2 layers75 × 55 mm
Rectifier
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
80 parts1