
TLV76133DCY
Texas InstrumentsExtended
-40℃~+125℃ 1 1.6V@(1A) 16V 1A 3.3V 60dB@(1kHz) 60uA 60uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- ti/TLV76133DCY
- Category
- Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
- Package
- SOT-223
- Pins
- 4
- In stock
- 7,085 at JLCPCB (C7527500)
- Used on
- 32 open-source boards
Overview
The TLV76133DCY is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-223 package with 3 pins. -40℃~+125℃ 1 1.6V@(1A) 16V 1A 3.3V 60dB@(1kHz) 60uA 60uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Regulator_Linear:TLV76133DCY, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-223-3_TabPin2, from KiCad's library), ready for a KiCad board. 7,085 are in stock at JLCPCB (part C7527500). 32 open-source boards in 27 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
16- Supply, least
- 2.5 V · VIN, recommended operating min · p. 4
- Supply, most
- 18 V · VIN, recommended operating max · p. 4
- Supply, absolute maximum
- 20 V · VIN, absolute max · p. 4
- Works from
- -40 °C · Operating ambient temperature min · p. 15
- Works up to
- 125 °C · Operating ambient temperature max · p. 15
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 65 µA · Quiescent current typical, IOUT = 0mA · p. 5
- Takes asleep
- 1.5 µA · Shutdown current approximately typical · p. 1
- Gives
- 800 mA · Output current max, 2.5 V ≤ VIN < 3 V · p. 4
- Gives
- 1 A · Output current max, VIN ≥ 3 V · p. 4
- Current limit
- 1.1 A · Output current limit min, VOUT = 0.9 × VOUT(NOM), VIN ≥ 3.0V · p. 5
- Output
- 3.3 V · TLV76133 fixed nominal output · p. 16
- Dropout
- 900 mV · Dropout typical, VIN ≥ 3.0V, IOUT = 1A · p. 5
- Junction to air (DCY (SOT–223))
- 95.4 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DCY (SOT–223))
- 55.6 K/W · Junction-to-case top thermal resistance · p. 5
- Junction to board (DCY (SOT–223))
- 33.7 K/W · Junction-to-board thermal resistance · p. 5
What it is and has
7- Output current
- Up to 1 A · p. 1
- Output accuracy
- ±1% across line and load · p. 1
- PSRR
- 60dB at 1kHz; 40dB at 1MHz · p. 10
- Internal soft start
- 500µs typical · p. 1
- Protection
- Foldback current limit and thermal protection · p. 1
- Output capacitor stability
- Stable with 1µF ceramic output capacitor · p. 1
- Package
- 4-pin SOT-223, 6.5mm x 7mm · p. 1
Around it
3- cap 1 µF
- between IN and GND; Recommended nominal input capacitance; use a low ESR ceramic capacitor and place close to IN and GND. · p. 4
- cap 2.2 µF
- between OUT and GND; Recommended nominal output capacitance; range 1 to 220 uF, ESR 2 to 500 mΩ. Place close to OUT and GND. · p. 4
- diode Schottky diode
- between OUT and IN; Example external protection when reverse current is expected. · p. 14
Specifications
35| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage VIN | Over operating free-air temperature range; all voltages with respect to GND | min -0.3 · max 20 V | 4 |
| Voltage VOUT | Maximum is VIN + 0.3 V or 18 V, whichever is smaller; all voltages with respect to GND | min -0.3 V | 4 |
| Operating junction (TJ) TJ | min -50 · max 150 °C | 4 | |
| Storage (TSTG) TSTG | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±3000 V | max 3000 V | 4 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±1000 V | max 1000 V | 4 |
| Input voltage VIN | Over operating free-air temperature range | min 2.5 · max 18 V | 4 |
| Output voltage VOUT | Family output voltage range | min 0.8 · max 13.5 V | 4 |
| Output current (2.5 V ≤ VIN < 3 V) IOUT | 2.5 V ≤ VIN < 3 V | min 0 · max 0.8 A | 4 |
| Output current (VIN ≥ 3 V) IOUT | VIN ≥ 3 V | min 0 · max 1 A | 4 |
| Output capacitor ESR COUT ESR | min 2 · max 500 mΩ | 4 | |
| Output capacitor COUT | Nominal value 2.2 uF; effective output capacitance of 0.47 uF minimum required for stability | min 1 · typ 2.2 · max 220 uF | 4 |
| Input capacitor CIN | Nominal value; not required for LDO stability | typ 1 uF | 4 |
| Junction temperature TJ | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DCY (SOT–223), 4 PINS | typ 95.4 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DCY (SOT–223), 4 PINS | typ 55.6 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DCY (SOT–223), 4 PINS | typ 33.7 °C/W | 5 |
| Junction-to-top characterization parameter ΨJT | DCY (SOT–223), 4 PINS | typ 13.9 °C/W | 5 |
| Junction-to-board characterization parameter ΨJB | DCY (SOT–223), 4 PINS | typ 33.4 °C/W | 5 |
| Nominal output accuracy VOUT | TJ = 25°C | min -1 · max 1 % | 5 |
| Output accuracy over temperature VOUT | VIN ≥ 3.0V, VOUT(NOM) ≤ 9.0V, 1mA ≤ IOUT ≤ 1A | min -1.75 · max 1.75 % | 5 |
| Line regulation ΔVOUT(ΔVIN) | VOUT(NOM) ≤ 9.0V, VOUT(NOM) + 1.5V ≤ VIN ≤ 18V, IOUT = 10mA | max 0.02 %/V | 5 |
| Load regulation ΔVOUT(ΔIOUT) | 1mA ≤ IOUT ≤ 1A, VIN ≥ 3.0V | typ 0.1 · max 0.75 %/A | 5 |
| Dropout voltage VDO | VIN ≥ 3.0V, IOUT = 1A | typ 0.9 · max 1.6 V | 5 |
| Output current limit ICL | VOUT = 0.9 x VOUT(NOM), VIN ≥ 3.0V | min 1.1 · max 1.6 A | 5 |
| Short-circuit current limit ISC | VOUT = 0V | min 150 · typ 250 · max 350 mA | 5 |
| Quiescent current IQ | IOUT = 0mA | typ 65 · max 100 uA | 5 |
| Output pulldown current IPULLDOWN | VIN = 1.8V, VOUT = 2.5V | min 0.7 · max 1.1 mA | 5 |
| Power-supply rejection ratio PSRR | VIN = 3.3V, VOUT = 1.8V, IOUT = 300mA, f = 120Hz | typ 70 dB | 5 |
| Output noise voltage Vn | BW = 10Hz to 100kHz, VIN = 3.3V, VOUT = 0.8V, IOUT = 100mA | typ 60 uVRMS | 5 |
| UVLO threshold rising VUVLO+ | VIN rising | typ 2.2 · max 2.4 V | 5 |
| UVLO hysteresis VUVLO(HYS) | typ 130 mV | 5 | |
| UVLO threshold falling VUVLO- | VIN falling | min 1.9 V | 5 |
| Thermal shutdown temperature TSD(shutdown) | Temperature increasing | typ 180 ºC | 5 |
| Thermal shutdown reset temperature TSD(reset) | Temperature falling | typ 160 ºC | 5 |
Pins, by the datasheet
4- 1 GND
- Ground pin. · p. 3
- 2 OUT
- Output pin; use the recommended output capacitor and place it as close to OUT and GND as possible. · p. 3
- Tab OUT
- Output tab; use the recommended output capacitor and place it as close to OUT and GND as possible. · p. 3
- 3 IN
- Input pin; use the recommended input capacitor and place it as close to IN and GND as possible. · p. 3
- 2 layers100 × 63.7 mm

- 2 layers109.5 × 51 mm

CANBOB (MAGE CANBOB-003)
Mage-Control-Systems-Ltd/CANBOB
A breakout board that enables USB or SPI to CAN communication using the MCP2515.
98 parts8CC-BY-4.0 - 4 layers87.4 × 175.5 mm

TM MUX Board REV B
emilefarine/redpitaya-afm
master project, low cost solution for afm acquisition
183 parts1MIT - 2 layers105 × 107.2 mm

- 4 layers49 × 49 mm

- 4 layers170 × 80 mm

- 2 layers69.6 × 26.4 mm

- 4 layers49 × 49 mm

Parts like it
8AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.3V@(1A) 12V 1A 3.3V 5mA 60dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3V
SOT-2230℃~+125℃@(Ta) 1 12mA 15V 1A 20mV@(1A) 3.3V Fixed Positive SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-3L-40℃~+125℃@(Tj) 0.003%Vout 1 1.4V@(1A) 12V 1A 3.3V 3mA 70dB@(120Hz) Fixed Over Temperature Protection Positive SOT-223-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTWGMCVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-50℃~+140℃ 1 1.3V@(1A) 12V 1A 3.3V 4mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-3-40℃~+125℃@(Ta) 1 1.3V@(1A) 15V 1A 3.3V 4mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSGUOXIN JIAPIN SEMICONDUCTORVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-3-20℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(800mA) 15V 1A 2mA 3.3V 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-2230.003%Vout 0℃~+150℃@(Tj) 1 1.2V@(1A) 15V 1A 3.3V 5mA 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSGRVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Questions
Is there a KiCad symbol and footprint for the TLV76133DCY?
Yes. The symbol is Regulator_Linear:TLV76133DCY and the footprint Package_TO_SOT_SMD:SOT-223-3_TabPin2, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TLV76133DCY?
SOT-223, with 3 pins. Its footprint is drawn on this page.
Where is the TLV76133DCY datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TLV76133DCY?
JLCPCB lists it as part C7527500, with 7,085 in stock; the sellers' links on this page open their listings.
What can replace the TLV76133DCY?
Parts like it in the library: the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW, the AMS1117-3.3V by MSKSEMI and the AMS1117-3.3 by TWGMC. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TLV76133DCY?
32 boards in 27 repositories on GitHub; the most starred are listed on this page, with their KiCad files.