
Control Board
marionas01/Global_Resist_Electronics
This Repo contains the Schematics and PCB files for the various electronic components designed to measure and control the EvolChip Bioreactor used in the Global Resist Project.

This Repo contains the Schematics and PCB files for the various electronic components designed to measure and control the EvolChip Bioreactor used in the Global Resist Project.
Measurement Board is an open-source printed circuit board by marionas01, from the marionas01/Global_Resist_Electronics repository on GitHub. It is a 4-layer board of 88 × 57 mm with 87 parts on 69 nets, routed with 498 tracks and 61 vias.
It is built around the TLV76133DCY, AO3407A and B340, with the TL2285EE among its other parts. Its parts include 48 resistors, 10 transistors, 9 connectors, 8 capacitors and 4 diodes. It belongs with the sensors and measurement boards of this library.
This Repo contains the Schematics and PCB files for the electronic components of the EvolChip.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +26 |
| 8 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | P0, P1, P2, P3, P4, P5, P6, P7 |
| 8 | Conn_01x06 | Connector_Molex:Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical | Q0, Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R46, R47 |
| 2 | 200 | Resistor_SMD:R_0603_1608Metric | R44, R48 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R42, R43 |
| 2 | AO3407A | AO3407A:SOT95P280X125-3N | Q8, Q9 |
| 2 | B340 | Diode_SMD:D_SMA | D3, D4 |
| 2 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | L-ESP32-C3, R-ESP32-C3 |
| 2 | LD271 | Diode_SMD:D_0603_1608Metric | D1, D2 |
| 2 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | MUX1, MUX2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C39 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C40 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | SPI_SD-Card_1 |
| 1 | TL2285EE | TL2285EE:SW_TL2285EE | S1 |
| 1 | TLV76133DCY | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | ~ | Custom_Symbols:BMP580 | BMP580 |

marionas01/Global_Resist_Electronics
This Repo contains the Schematics and PCB files for the various electronic components designed to measure and control the EvolChip Bioreactor used in the Global Resist Project.

marionas01/Global_Resist_Electronics
This Repo contains the Schematics and PCB files for the various electronic components designed to measure and control the EvolChip Bioreactor used in the Global Resist Project.

tejashviraj19/PCB-Design-Lab
PCB Design projects, KiCad layouts, embedded hardware experiments, and fabrication-ready PCB designs.

dohaahmed2135-oss/kicad-learning-projects
Welcome to my KiCad Learning Projects repository!
MAHESH-THILAK-K/USING-STM32-GPS-TRACKER
This project presents a compact GPS tracking system using an STM32 microcontroller and SIM808 GSM/GPS module. It enables real-time location tracking and cellular data transmission for IoT applications such as vehicle…
Manideep136/GPS-Tracker-using-STM32
A custom PCB design for an STM32-based GPS tracking system using the SIM808 GPS/GPRS module.

midhun09-git/KiCad-PCB-Projects
This repository contains a collection of my PCB design projects created using KiCad. Each project demonstrates a different type of power electronics or embedded circuit design.
PratibhaMishra2614/STM32_GPS_TRACKER
STM32-based GPS Tracker PCB designed in KiCad with integrated GPS module, power regulation and optimized PCB layout for embedded tracking applications.
Suman-Gayen/STM32_GPS_Tracker
STM32 based GPS_Tracker using SIM800 PCB design

upsidedownlabs/BioAmp-v1.5
Upside Down Lab's Biopotential Amplifier v1.5 - Buy on Tindie at https://bit.ly/BioAmp-v1_5
It measures 88 × 57 mm and has 4 copper layers, 1.6 mm thick.
87 parts, built around the TLV76133DCY, AO3407A, B340 and TL2285EE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the marionas01/Global_Resist_Electronics repository on GitHub, at the commit this page was made from: the board is Measurement_Board/Measurement_Board.kicad_pcb and its schematic Control_Board/Control_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask marionas01 before reusing the design.