Skip to the content
4 layers49.3 × 66.2 mmSTM32 GPS tracker, the printed circuit board in 3D

Welcome to my KiCad Learning Projects repository!

Size
49.3 × 66.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
57
Nets
144
Pads
292
Tracks, vias
505, 81
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Jun 2026
Updated
28 Jun 2026

Overview

STM32 GPS tracker is an open-source printed circuit board by dohaahmed2135-oss, from the dohaahmed2135-oss/kicad-learning-projects repository on GitHub. It is a 4-layer board of 49.3 × 66.2 mm with 57 parts on 144 nets, routed with 505 tracks and 81 vias.

It is built around the SIM808, TPS5430DDA and SMF05CT1G, with the U.FL-R-SMT-1, AO3407A and B340 among its other parts. Its parts include 19 capacitors, 13 resistors, 5 diodes, 4 ICs and 3 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.

Main components

6

README

README.md

KiCad Learning Projects

Welcome to my KiCad Learning Projects repository!

This repository documents my journey of learning PCB design using KiCad through a series of practical hardware projects. Each project has helped me build a stronger understanding of schematic design, PCB layout, component placement, routing, and hardware documentation.


Skills Developed

  • Schematic Capture
  • PCB Layout & Routing
  • Component & Footprint Selection
  • Electrical Rule Check (ERC)
  • Design Rule Check (DRC)
  • Power & Signal Routing
  • PCB Visualization
  • Embedded Hardware Design
  • GitHub

Projects

01 - 12V AC to DC Converter

Designed a PCB for converting AC voltage to a regulated DC output while learning the complete PCB design workflow in KiCad.


PCB Layout

3D Front View

02 - Motor Driver

Designed a motor driver PCB to practice component placement, power routing, and PCB organization for embedded applications.


PCB Layout

3D Front View

03 - STM32 GPS Tracker with SIM808

Designed an STM32-based GPS tracking PCB integrating the SIM808 GSM/GPRS and GPS module.


PCB Front Layout

3D Front View

04 - STM32 Bluetooth

Designed a custom STM32 Bluetooth development board to gain experience with wireless embedded hardware design. This project focused on Bluetooth module integration, PCB placement, routing, and overall board organization.


PCB Layout

3D Front View

05 - ESP32 S3 IOT Testboard

Designed a four-layer ESP32-S3 IoT development board featuring sensor interfaces and a QWIIC connector. This project provided practical experience with multilayer PCB design, power distribution, and high-density routing techniques.


PCB Front Layout

3D Front View

Learning Goal

The purpose of this repository is to document my progress in PCB design while building a strong foundation in embedded systems and hardware engineering.

My long-term goal is to design complete embedded and robotics systems by combining PCB design, embedded software, CAD, and robotics.

Acknowledgements

The projects in this repository were completed as part of my PCB design learning journey using the following educational resources:

Ampnics – Master KiCad With Projects (Projects 01–03)

Phil's Lab – KiCad 7 STM32 Bluetooth Hardware Design (Project 04)

KiCad 9: Design an ESP32-S3 IoT 4-layer PCB with Sensor and QWIIC Interface – Complete Guide (Project 05)

Parts

57
QtyValueFootprintReferences
6100nCapacitor_SMD:C_0805_2012MetricC8, C9, C10, C11, C12, C15
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2, H3, H4
310KResistor_SMD:R_0805_2012MetricR11, R12, R13
31k5Resistor_SMD:R_0805_2012MetricR5, R6, R10
3LEDLED_SMD:LED_0805_2012MetricD2, D4, D5
210pCapacitor_SMD:C_0805_2012MetricC5, C16
230pCapacitor_SMD:C_0805_2012MetricC13, C14
24u7Capacitor_SMD:C_0805_2012MetricC6, C7
2Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2, J3
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJRESET, USER
2U.FL-R-SMT-1new_components:U.FL-R-SMT-1GPS1, GSM1
1100kResistor_SMD:R_0805_2012MetricR4
1100uCapacitor_SMD:C_0805_2012MetricC3
110kResistor_SMD:R_0805_2012MetricR2
110nCapacitor_SMD:C_0805_2012MetricC17
110uCapacitor_SMD:C_0805_2012MetricC1
115uHInductor_SMD:L_10.4x10.4_H4.8L1
11K5Resistor_SMD:R_0805_2012MetricR8
11kResistor_SMD:R_0805_2012MetricR3
11uCapacitor_SMD:C_0805_2012MetricC18
1220uCapacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-WC2
122pCapacitor_SMD:C_0805_2012MetricC19
12K7Resistor_SMD:R_0805_2012MetricR9
133pCapacitor_SMD:C_0805_2012MetricC4
14K7Resistor_SMD:R_0805_2012MetricR1
1693010020611new_components:693010020611SIM CARD HOLDER
18K2Resistor_SMD:R_0805_2012MetricR7
18MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
1AO3407Anew_components:SOT95P280X125-3NQ1
1B340Diode_SMD:D_SMCD1
1D_ZenerDiode_SMD:D_0805_2012MetricD3
1Fuse 2.5AFuse:Fuse_0402_1005MetricF1
1SIM808Library:XCVR_SIM808U1
1SMF05CT1Gnew_components:SOT65P210X110-6NU4
1STM32F030C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU2
1Screw_Terminal_01x02TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type073_RT02602HBLU_1x02_P5.08mm_HorizontalJ1
1TPS5430DDAnew_components:VREG_LM5017MR_NOPBU3

More from dohaahmed2135-oss/kicad-learning-projects

3
  • 4 layers61 × 60.7 mmESP32-S3 IOT, the printed circuit board in 3D

    ESP32-S3 IOT

    dohaahmed2135-oss/kicad-learning-projects

    Welcome to my KiCad Learning Projects repository!

    42 parts
  • 2 layers41 × 33 mm12ACDC converter, the printed circuit board in 3D

    12ACDC converter

    dohaahmed2135-oss/kicad-learning-projects

    Welcome to my KiCad Learning Projects repository!

    10 parts
  • 2 layers25.8 × 19 mmMotor driver, the printed circuit board in 3D

    Motor driver

    dohaahmed2135-oss/kicad-learning-projects

    Welcome to my KiCad Learning Projects repository!

    8 parts

Similar boards

  • 4 layers42.5 × 58.5 mmSTM32 GPS Tracking Module, the printed circuit board in 3D

    STM32 GPS Tracking Module

    tejashviraj19/PCB-Design-Lab

    PCB Design projects, KiCad layouts, embedded hardware experiments, and fabrication-ready PCB designs.

    61 parts1
  • 4 layers41.4 × 60.1 mmGPS TRACKER USING STM32, the printed circuit board in 3D

    GPS TRACKER USING STM32

    MAHESH-THILAK-K/USING-STM32-GPS-TRACKER

    This project presents a compact GPS tracking system using an STM32 microcontroller and SIM808 GSM/GPS module. It enables real-time location tracking and cellular data transmission for IoT applications such as vehicle…

    59 parts
  • 4 layers35.4 × 57.2 mmSTM32 GPS Tracker, the printed circuit board in 3D

    STM32 GPS Tracker

    Suman-Gayen/STM32_GPS_Tracker

    STM32 based GPS_Tracker using SIM800 PCB design

    60 parts
  • 4 layers56 × 59.8 mmSTM32 GPS Tracker, the printed circuit board in 3D

    STM32 GPS Tracker

    Manideep136/GPS-Tracker-using-STM32

    A custom PCB design for an STM32-based GPS tracking system using the SIM808 GPS/GPRS module.

    53 parts
  • 2 layers48.7 × 66.6 mmGPS Tracker STM32, the printed circuit board in 3D

    GPS Tracker STM32

    midhun09-git/KiCad-PCB-Projects

    This repository contains a collection of my PCB design projects created using KiCad. Each project demonstrates a different type of power electronics or embedded circuit design.

    57 parts
  • 4 layers42.3 × 61 mmSTM32 GPS Tracke, the printed circuit board in 3D

    STM32 GPS Tracke

    PratibhaMishra2614/STM32_GPS_TRACKER

    STM32-based GPS Tracker PCB designed in KiCad with integrated GPS module, power regulation and optimized PCB layout for embedded tracking applications.

    58 parts
  • 4 layers68 × 53.1 mmSTM32 and GPS Technology PCB, the printed circuit board in 3D

    STM32 and GPS Technology PCB

    JayTzw/Mechanical---Robotics---Electronics

    CAD files, Circuit schematics & PCB designs, Robotics simulations

    66 parts
  • 2 layers35 × 53 mmMcudev, the printed circuit board in 3D

    Mcudev

    HarshBihani18/GPS-Tracker-PCB

    GPS Tracker PCB designed using KiCad.

    57 parts

Questions

How big is the STM32 GPS tracker PCB?

It measures 49.3 × 66.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the STM32 GPS tracker use?

57 parts, built around the SIM808, TPS5430DDA, SMF05CT1G and U.FL-R-SMT-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32 GPS tracker KiCad files?

From the dohaahmed2135-oss/kicad-learning-projects repository on GitHub, at the commit this page was made from: the board is 03-STM32-GPS-Tracker/STM32_GPS_tracker.kicad_pcb and its schematic 01-12V_AC_to_DC_Converter/12ACDC converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32 GPS tracker design in my own project?

Its repository states no licence, so its author keeps all rights: ask dohaahmed2135-oss before reusing the design.