GPS Tracker PCB designed using KiCad.
- Size
- 35 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 105
- Pads
- 300
- Tracks, vias
- 285, 27
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jun 2026
- Updated
- 27 Jun 2026
Overview
Mcudev is an open-source printed circuit board by HarshBihani18, from the HarshBihani18/GPS-Tracker-PCB repository on GitHub. It is a 2-layer board of 35 × 53 mm with 57 parts on 105 nets, routed with 285 tracks and 27 vias.
It is built around the SIM808, TPS5430DDA and SMF05CT1G, with the U.FL-R-SMT(10), AO3407 and B340 among its other parts. Its parts include 22 ICs, 13 resistors, 5 diodes, 4 connectors and 2 switches. It belongs with the STM32 boards of this library.
Main components
7SIM808
SMD,24x24mm-40℃~+85℃ 1.07mA 3.4V~4.4V GPRS、GSM I2C、USB、UART、GPIO、ADC、PWM PCM voice function、DTMF function、Audio playback and recording function、CMUX function、Noise suppression function、USSD function SMD,24x24mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G ModulesTPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSMF05CT1G
SOT-363-55℃~+125℃ 100W 100nA 10V 1A 30pF 5 5V 6V IEC 61000-4-2、IEC 61000-4-4 TVS SOT-363 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)U.FL-R-SMT(10)
SMD-40℃~+90℃ 1 1.25mm 2mm 50Ω 6GHz Board Side IPEX Male Pin SMD Coaxial Connectors (RF) ROHSHirose ElectricCoaxial Connectors (RF)AO3407
SOT-23-55℃~+150℃ 1 P-Channel 1.4W 1V 260pF 30V 37pF 4.1A 75mΩ@4.5V P-Channel ±20V SOT-23 MOSFETs ROHSBORNMOSFETsB340
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 40V 500mV@3A 500uA@40V SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesSMO-1512
SMD-25℃~+85℃ 1.8mm Connector and Ejector Hinged Lid MicroSIM Card SMD SIM Card Connectors ROHSSOFNGSIM Card Connectors
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | U2, U3, U4, U5, U6, U12 |
| 3 | 1k5 | Resistor_SMD:R_0603_1608Metric | R1, R2, R8 |
| 3 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H4 |
| 3 | R22 | Resistor_SMD:R_0402_1005Metric | R4, R5, R12 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | U11, U22 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | U8, U9 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric | U1, U17 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW1, SW2 |
| 2 | U.FL-R-SMT(10) | u.fl:HRS_U.FL-R-SMT(10) | GPS1, GSM1 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | U20 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | U13 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | U15 |
| 1 | 15uH | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | U18 |
| 1 | 220u | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C1 |
| 1 | 22p | Capacitor_SMD:C_0402_1005Metric | U19 |
| 1 | 2k7 | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 33p | Capacitor_SMD:C_0402_1005Metric | U21 |
| 1 | 4k7 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 5V-20V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | U7 |
| 1 | 8k2 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | AO3407 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | B340 | Diode_SMD:D_SMA | D3 |
| 1 | D_Zener | Zener:LL-34 | D5 |
| 1 | Fuse 2.5A | Fuse:Fuse_0402_1005Metric | F1 |
| 1 | LED1 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED2 | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Left Header Pins | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H3 |
| 1 | PWR Status | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | Right Header Pins | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | SIM808 | SIM808:XCVR_SIM808 | U16 |
| 1 | SMF05CT1G | SMF05CT1G:SOT65P210X110-6N | U23 |
| 1 | SMO-1512 | SMO-1512:SIM-SMD_SMO-1512 | P1 |
| 1 | STM32F030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | STM32F30 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U14 |
Similar boards
- 2 layers

- 4 layers42.5 × 58.5 mm

STM32 GPS Tracking Module
tejashviraj19/PCB-Design-Lab
PCB Design projects, KiCad layouts, embedded hardware experiments, and fabrication-ready PCB designs.
61 parts1 - 4 layers49.3 × 66.2 mm

STM32 GPS tracker
dohaahmed2135-oss/kicad-learning-projects
Welcome to my KiCad Learning Projects repository!
57 parts - 4 layers41.4 × 60.1 mm

GPS TRACKER USING STM32
MAHESH-THILAK-K/USING-STM32-GPS-TRACKER
This project presents a compact GPS tracking system using an STM32 microcontroller and SIM808 GSM/GPS module. It enables real-time location tracking and cellular data transmission for IoT applications such as vehicle…
59 parts - 4 layers56 × 59.8 mm

STM32 GPS Tracker
Manideep136/GPS-Tracker-using-STM32
A custom PCB design for an STM32-based GPS tracking system using the SIM808 GPS/GPRS module.
53 parts - 2 layers48.7 × 66.6 mm

GPS Tracker STM32
midhun09-git/KiCad-PCB-Projects
This repository contains a collection of my PCB design projects created using KiCad. Each project demonstrates a different type of power electronics or embedded circuit design.
57 parts - 4 layers42.3 × 61 mm

STM32 GPS Tracke
PratibhaMishra2614/STM32_GPS_TRACKER
STM32-based GPS Tracker PCB designed in KiCad with integrated GPS module, power regulation and optimized PCB layout for embedded tracking applications.
58 parts - 4 layers35.4 × 57.2 mm

STM32 GPS Tracker
Suman-Gayen/STM32_GPS_Tracker
STM32 based GPS_Tracker using SIM800 PCB design
60 parts
Questions
How big is the Mcudev PCB?
It measures 35 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mcudev use?
57 parts, built around the SIM808, TPS5430DDA, SMF05CT1G and U.FL-R-SMT(10). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcudev KiCad files?
From the HarshBihani18/GPS-Tracker-PCB repository on GitHub, at the commit this page was made from: the board is mcudev.kicad_pcb and its schematic mcudev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcudev design in my own project?
Its repository states no licence, so its author keeps all rights: ask HarshBihani18 before reusing the design.