Skip to the content
2 layers32 × 60 mmBioAmp v1.5, the printed circuit board in 3D

Upside Down Lab's Biopotential Amplifier v1.5 - Buy on Tindie at https://bit.ly/BioAmp-v1_5

Size
32 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
21
Pads
86
Tracks, vias
210, 14
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Nov 2020
Updated
26 Mar 2023

Overview

BioAmp v1.5 is an open-source printed circuit board by upsidedownlabs, from the upsidedownlabs/BioAmp-v1.5 repository on GitHub. It is a 2-layer board of 32 × 60 mm with 34 parts on 21 nets, routed with 210 tracks and 14 vias.

It is built around the PJ-3062-CO and TL2285EE. Its parts include 11 resistors, 9 connectors, 8 capacitors, 1 IC and 1 diode. It belongs with the audio and music boards of this library.

Main components

2

README

README.md

BioAmp v1.5

Project Category BioAmp v1.5 Revision PayPal Link Tindie Link Intro to BioAmp v1.5 BioAmp EXG Pill Hackaday Page

BioAmp v1.5 is a single chip Bio-potential amplifier for recording any Bio-potential signal non-invasively. It's compatible with Backyard Brains Spike Recorder, which you can use to record and visualize all the Bio-potential signals.

Upside Down Labs BioAmp v1.5.6 back

Hardware

BioAmp v1.5 has been created using KiCad and all the design files can be found under hardware folder, including production Gerber files. Images below shows a quick overview of the hardware design.

FrontBack
Upside Down Labs BioAmp v1.5.6 frontUpside Down Labs BioAmp v1.5.6 back
Assembled PCB
Upside Down Labs BioAmp v1.5.6 front
DimensionsSchematic
32x60mmUpside Down Labs BioAmp v1.5.6 dimensionsUpside Down Labs BioAmp v1.5.6 schematic
Licenses FactsOSHWA Certification
Open Source Licenses FactsOpen Source Hardware Certification mark

License

Hardware

CERN Open Hardware License Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0).

Software

MIT open source license.

Documentation:

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Parts

34
QtyValueFootprintReferences
610kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R5, R6, R7, R8
5100nFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1, C3, C4, C5, C6
4Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J5, J6, J7
347uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2, C7, C8
2100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9, R10
2220kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR11
19v snapConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ7
1Audio cableConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Electode cableConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1PJ-3062-COudlabs:PJ3062COJ2
1RED LEDLED_THT:LED_D5.0mmD1
1TL074Package_DIP:DIP-14_W7.62mm_Socket_LongPadsU1
1TL2285EEudlabs:G64_DPDTS1

The 31 most common of 34 parts.

Similar boards

  • 2 layers60.3 × 53.3 mmMuscle BioAmpShield, the printed circuit board in 3D

    Muscle BioAmpShield

    upsidedownlabs/DIY-Muscle-BioAmp-Shield

    A Do It Yourself (DIY) Electromyography (EMG) shield for learning neauroscience with ease.

    60 parts15
  • 2 layers99.7 × 35 mmPocket lightning detector, the printed circuit board in 3D

    Pocket lightning detector

    Matyas604/Pocket-lightning-detector

    A lightning detector that runs on a battery and fits in your pocket. It records the distance, energy and current time of a lightning strike, and you can then view this data via Bluetooth in mobile app.

    74 parts1GPL-3.0
  • 2 layers220 × 91.3 mmProtoGuitarPedalBoard, the printed circuit board in 3D

    ProtoGuitarPedalBoard

    michalgluszak/ProtoGuitarPedalBoard

    The Proto-Guitar Pedal Board is a universal hardware platform designed specifically for comfortable prototyping and testing of custom guitar effects.

    25 parts1
  • 2 layers60 × 80 mmLED board PWM, the printed circuit board in 3D

    LED board PWM

    AndreasNosal/NatureCircuit-led-PWM

    temporary

    43 partsGPL-3.0
  • 4 layers88 × 57 mmMeasurement Board, the printed circuit board in 3D

    Measurement Board

    marionas01/Global_Resist_Electronics

    This Repo contains the Schematics and PCB files for the various electronic components designed to measure and control the EvolChip Bioreactor used in the Global Resist Project.

    87 parts
  • 2 layers55 × 36 mmDesktopPowerSupply, the printed circuit board in 3D

    DesktopPowerSupply

    michalgluszak/DesktopPowerSupply

    The Desktop Power Supply is a compact workshop power supply based on the popular and reliable LM317 linear voltage regulator.

    16 parts
  • 2 layers58.8 × 47.3 mmSKEMATIK, the printed circuit board in 3D

    SKEMATIK

    muhammadfaqidin/TapSit

    Sistem Pemilihan dan Pemantauan Tempat Duduk Berbasis RFID untuk Optimalisasi Industri F&B

    14 parts
  • 2 layers161.4 × 165 mmLight, the printed circuit board in 3D

    Light

    zeyad-hisham-cyper/Solar-IoT-Smart-Irrigation-System

    A distributed, low-power irrigation platform that closes the loop between soil sensors in the field and a phone in your hand. It is built from three cooperating subsystems:

    84 partsMIT

Questions

How big is the BioAmp v1.5 PCB?

It measures 32 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BioAmp v1.5 use?

34 parts, built around the PJ-3062-CO and TL2285EE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BioAmp v1.5 KiCad files?

From the upsidedownlabs/BioAmp-v1.5 repository on GitHub, at the commit this page was made from: the board is hardware/BioAmp v1.5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BioAmp v1.5 design in my own project?

Its repository states no licence, so its author keeps all rights: ask upsidedownlabs before reusing the design.