
BioAmp v1.5
upsidedownlabs/BioAmp-v1.5
Upside Down Lab's Biopotential Amplifier v1.5 - Buy on Tindie at https://bit.ly/BioAmp-v1_5

A Do It Yourself (DIY) Electromyography (EMG) shield for learning neauroscience with ease.
Muscle BioAmpShield is an open-source printed circuit board by upsidedownlabs, from the upsidedownlabs/DIY-Muscle-BioAmp-Shield repository on GitHub. It is a 2-layer board of 60.3 × 53.3 mm with 60 parts on 53 nets, routed with 411 tracks and 204 vias.
It is built around the PJ-3062-CO. Its parts include 20 resistors, 14 connectors, 12 capacitors, 6 diodes and 2 ICs.
Muscle BioAmp Shield is an all-in-one Arduino Uno ElectroMyography (EMG) shield for learning neuroscience with ease. It is a DIY Electrophysiology/NeuroScience shield inspired from Back Yard Brains (BYB) Muscle Spiker shield and provides similar features like hobby servo output, user buttons, LED Bar, Audio output, and battery input. It is perfect for beginners as they can easily stack it on top of Arduino Uno to record, visualize and listen to their muscle signals to make amazing projects in the domain of Human-Computer Interface (HCI).
Muscle BioAmp Shield comes with various plug-and-play options so you can connect hundreds of extension boards like OLED screens, character displays, accelerometers, and servo controllers to name just a few using the STEMMA I2C interface. You also get STEMMA digital and STEMMA analog ports. On STEMMA analog port you can connect additional BioAmp EXG Pill or any other sensor with analog output. On STEMMA digital port you can connect any digital sensor or actuator of your choice.

You can get your own Muscle BioAmp Shield bag of parts from our store or Tindie and for assembling your shield you can take a look at this interactive BOM or the step by step guide below.
| Step 1 - Bare board | Step 2 - 1M Resistors | Step 3 - 330R Resistors |
|---|---|---|
![]() | ![]() | ![]() |
| Step 4 - 10K Resistors | Step 5 - 22K Resistors | Step 6 - 1K Resistors |
|---|---|---|
![]() | ![]() | ![]() |
| Step 7 - 220K Resistors | Step 8 - 1nF Capacitors | Step 9 - 100nF Capacitors |
|---|---|---|
![]() | ![]() | ![]() |
| Step 10 - 100pF Capacitors | Step 11 - Servo Header Pin | Step 12 - Buttons |
|---|---|---|
![]() | ![]() | ![]() |
| Step 13 - Optoisolator | Step 14 - Angled JST Connectors | Step 15 - Straight JST Connectors |
|---|---|---|
![]() | ![]() | ![]() |
| Step 16 - IC Socket | Step 17 - IC | Step 18 - LEDs |
|---|---|---|
![]() | ![]() | ![]() |
| Step 19 - 3.5mm Headphone Jack | Step 20 - 2.2uF Capacitor | Step 21 - 1uF Capacitor |
|---|---|---|
![]() | ![]() | ![]() |
| Step 22 - 470uF Capacitors | Step 23 - Shield Header Pins | Step 24 - Shield Ready |
|---|---|---|
![]() | ![]() | ![]() |
Muscle BioAmp Shield comes in two variants: Pre-Assembled and DIY (Do-It-Yourself). You can order any of the two variants as per your requirement.

Muscle BioAmp Shield has been created using KiCad and all the design files can be found under hardware folder, including Interactive BOM file. Images below shows a quick overview of the hardware design.
| PCB front | PCB back |
|---|---|
![]() | ![]() |


CERN Open Hardware License Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0).
MIT open source license.

This work is licensed under a Creative Commons Attribution 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R15, R16, R17, R18 |
| 6 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
| 4 | 220K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R8, R11 |
| 3 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C9, C11 |
| 3 | 100pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C5, C8 |
| 3 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12, R19, R20 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R9, R10 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 1nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C4, C7 |
| 2 | 22K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C10, C12 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C6 |
| 1 | 2.2uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Amp | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Audio_output | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J5 |
| 1 | Battery Power | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J9 |
| 1 | BioAmp Input | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J1 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | G*** | kibuzzard-63B5E73F | kibuzzard-63B5E73F |
| 1 | G*** | kibuzzard-63B67C69 | kibuzzard-63B67C69 |
| 1 | G*** | kibuzzard-63B65023 | kibuzzard-63B65023 |
| 1 | Isolated Output | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | LOGO | UDLEOG:CandyMuscle | G*** |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U2 |
| 1 | PJ-3062-CO | udlabs:PJ3062CO | J2 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
| 1 | Servo motor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | Stemma Analog A2 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7 |
| 1 | Stemma Digital D6 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J4 |
| 1 | Stemma I2C | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J8 |
| 1 | Stemma I2C | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |

upsidedownlabs/BioAmp-v1.5
Upside Down Lab's Biopotential Amplifier v1.5 - Buy on Tindie at https://bit.ly/BioAmp-v1_5



sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.




It measures 60.3 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the PJ-3062-CO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the upsidedownlabs/DIY-Muscle-BioAmp-Shield repository on GitHub, at the commit this page was made from: the board is hardware/Muscle-BioAmpShield.kicad_pcb and its schematic hardware/Muscle-BioAmpShield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask upsidedownlabs before reusing the design.