Skip to the content
2 layers60 × 80 mmLED board PWM, the printed circuit board in 3D

temporary

Size
60 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
36
Pads
121
Tracks, vias
360, 8
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Mar 2025
Updated
16 Mar 2025

Overview

LED board PWM is an open-source printed circuit board by AndreasNosal, from the AndreasNosal/NatureCircuit-led-PWM repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 80 mm with 43 parts on 36 nets, routed with 360 tracks and 8 vias.

It is built around the LM393N, IRLZ44N and TL2285EE. Its parts include 12 capacitors, 10 resistors, 6 connectors, 4 transistors and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.

Main components

3

README

PCB/LED-board/readme.md

Board for controlling the led panel.

Parts

43
QtyValueFootprintReferences
60.1uFCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC3, C4, C5, C6, C10, C11
447uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC7, C8, C9, C12
3IRLZ44NIRLZ44N:IRLZ44NQ1, Q2, Q4
3K10Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3, R7
21000uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2
2Conn_01x01_PinTestPoint:TestPoint_Pad_D3.0mmJ2, J3
2Conn_01x02_SocketConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ1, J4
12N3906digikey-footprints:TO-92-3Q3
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5
1K4.7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6
1K5Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8
1K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10
1LEDLED_THT:LED_D2.0mm_W4.0mm_H2.8mm_FlatTopD1
1LM393N_LTBdigikey-footprints:DIP-8_W7.62mmU2
1R150Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1R200Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1R50Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR9
1R65Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5
1RGBfootprints:RGB_LEDLED1
1R_Potentiometer_TrimPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1
1Seeed_Studio_XIAO_ESP32C3Seeed_Studio_XIAO_ESP32C3:MODULE_Seeed_Studio_XIAO_ESP32C3U1
1TL2285EETL2285EE:SW_TL2285EES1
1Thermistor_NTCResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_VerticalTH1
1~PWM_regulator_2A:PWM_regulator_2Apwm1
1~Battery_module_MH-CD42_THT:MH_CD42_Charge_Discharge_Modulebms1
1~Buck_Converter_TZT_THT:TZT_4A_Mini_DC_DC_Buck_Converterbuck_converter1

Similar boards

  • 2 layers180 × 130 mmCell test bench, the printed circuit board in 3D

    Cell test bench

    0hasant/Liion_Cell_Simulator

    Single-cell characterization bench for 18650 and 21700 Li-ion cells (DMEGC INR45E, generic 3.5 Ah 18650). Part of the Solaris final-year project.

    133 parts
  • 2 layers101.5 × 63 mmN24 ACAmplifier, the printed circuit board in 3D

    N24 ACAmplifier

    deqit/PhilipsPM2528

    Hardware and software for the Philips PM2528

    114 parts3
  • 2 layers36 × 26 mmChemE, the printed circuit board in 3D

    ChemE

    CalebJM04/ChemE-Car-

    op amp circuit for the cheme car club

    12 parts
  • 2 layers120 × 95 mmRain Sense, the printed circuit board in 3D

    Rain Sense

    Iva0108/Rain-Sense

    PCB design as well as case design for a rain sensor. KiCad and FreeCad.

    55 parts
  • 2 layers48 × 72 mmTachometer, the printed circuit board in 3D

    Tachometer

    Numata-wasa/Tachometer

    22 partsMIT
  • 2 layers81 × 54.5 mmFullSheetCurlingTimer, the printed circuit board in 3D

    FullSheetCurlingTimer

    theznerd/FullSheetCurlingTimer

    An exploration of ESP32, Bluetooth GATT, and ESP-NOW to create a full-sheet curling timer for practice.

    25 parts
  • 2 layers32 × 60 mmBioAmp v1.5, the printed circuit board in 3D

    BioAmp v1.5

    upsidedownlabs/BioAmp-v1.5

    Upside Down Lab's Biopotential Amplifier v1.5 - Buy on Tindie at https://bit.ly/BioAmp-v1_5

    34 parts42
  • 2 layers99.7 × 35 mmPocket lightning detector, the printed circuit board in 3D

    Pocket lightning detector

    Matyas604/Pocket-lightning-detector

    A lightning detector that runs on a battery and fits in your pocket. It records the distance, energy and current time of a lightning strike, and you can then view this data via Bluetooth in mobile app.

    74 parts1GPL-3.0

Questions

How big is the LED board PWM PCB?

It measures 60 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED board PWM use?

43 parts, built around the LM393N, IRLZ44N and TL2285EE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED board PWM KiCad files?

From the AndreasNosal/NatureCircuit-led-PWM repository on GitHub, at the commit this page was made from: the board is PCB/LED-board/LED-board-PWM.kicad_pcb and its schematic PCB/LED-board/LED-board-PWM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED board PWM design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).