4 layers65 × 49.8 mm
2.5in IDE SSD no lengthmatch
dosdude1/2.5-inch-ide-ssd
A custom-designed IDE SSD for use in any machine that utilizies a 2.5" IDE hard disk.
91 parts334GPL-3.0
Boards using the TLV75533PDRV
26 boardsBoards in 23 GitHub repositories, designed in KiCad, that use the TLV75533PDRV by Texas Instruments (-40℃~+125℃@(Tj) 1 238mV@(500mA) 25uA 3.3V 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the TLV75533PDRV’s symbol, footprint and pinout are on its own page.
- 2 layers41.6 × 47.3 mm
Homekey
lollokara/HomeKey-ESP32-PCB
HomeKey-ESP32-PCB A miniaturized, wall-mountable HomeKey reader board
71 parts20 - 6 layers26 × 25 mm
Tektag
teklabsdigital/TekTag
Biosensor for telehealth, patient monitoring, fall detection, dementia geofencing and cardiograms
93 parts18 - 4 layers52.5 × 59.7 mm
ESPHome Indoor Multi Sensor
mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.
113 parts14CERN-OHL-P-2.0 - 2 layers31 × 17 mm
UsbCarrierMM8108
JeffersonSchostakovich/halowBoards
MM8108-based adapters in different form factors for EU availability of sub-GHz halow 802.11ah hardware - mainly for decentralised networking (Reticulum mesh) and distributed IoT experimentation purposes.
23 parts8 - 2 layers46 × 15.2 mm
Tots
mimok/yast-hw
Hardware source files of the YAST security token from OTS Security
29 parts6CC-BY-4.0 - 4 layers35.6 × 17.8 mm
- 4 layers26.4 × 50.8 mm
IOT
yuanyong2024/IoT-feather
a IoT evb board that based on Quectel BG95 modem and in adafruit feather form factor
111 parts2 - 4 layers35 × 35 mm
NavIC GNSS
Chirag-Vadrali/ASTRA-NAV-M9-Reverse-Engineered
A reverse-engineered GNSS receiver board centered on the u-blox NEO-M9N module. The KiCad design is labeled ASTRA-NAV M9, Rev 1.0 and is intended to provide a compact, host-connected GNSS interface with a dedicated RF…
25 parts1 - 2 layers50 × 30 mm
- 4 layers26.7 × 20.3 mm
- 2 layers
- 4 layers36.4 × 44.1 mm
- 4 layers
- 2 layers42 × 58.1 mm
- 4 layers100 × 100 mm
LM399-Voltage Standard
IndexAsm/LM399-Voltage-Standard
10V Voltage Standard used to calibrate equipment.
118 parts - 4 layers81 × 49 mm
- 2 layers32.8 × 52.5 mm
Scrapped
matarga/simple-devboard
Mk1 is the internal name of this project. I am using this as a way to learn about PCB design and embedded systems and make a "final" out of it.
52 parts - 2 layers
Pcb dev fpga iCE40
shishir-dey/pcb-dev-fpga-iCE40
A 2 layer development board with a Lattice Semiconductor ICE40UP5K-SG48ITR FPGA. Made with KiCad
57 partsMIT - 2 layers50 × 50 mm
- 2 layers37 × 18 mm
ProMicro
nerdyscout/Arduino_MCP3x6x_Library
Library to support Microchip MPC3x6x 16/24bit analog to digital converters.
34 parts20MIT - 2 layers31 × 17 mm
UsbaCarrierMM8108 revC
JeffersonSchostakovich/halowBoards
MM8108-based adapters in different form factors for EU availability of sub-GHz halow 802.11ah hardware - mainly for decentralised networking (Reticulum mesh) and distributed IoT experimentation purposes.
23 parts8 - 4 layers36 × 18 mm
- 2 layers27.8 × 33.6 mm
Simple devboard
matarga/simple-devboard
Mk1 is the internal name of this project. I am using this as a way to learn about PCB design and embedded systems and make a "final" out of it.
28 parts