
TritonECU Main
alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry
Boards in 26 GitHub repositories, designed in KiCad, that use the LM74700QDBVRQ1 by Texas Instruments (-40℃~+150℃ 11mA 15V 2.37A 20mV 3.2V~65V 65V 80uA External FET Reverse current blocking、Reverse polarity protection、With enable SOT-23-6 ORing Controllers ROHS). See how each wires it, with its parts, size, README and files; the LM74700QDBVRQ1’s symbol, footprint and pinout are on its own page.

alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry





JRavenelco/WRO_2025_SSbots
We are the SSBots team from Mexico, competitors in the WRO Future Engineers category. This is our first year competing in this category, exploring further into WRO after competing for years in the Robo Mission Category.

loganrf/compactPi
compactPi is a project to develop a compact Raspberry Pi Compute Module carrier suitable for ArduPilot applications. It's primarily targeted at marine applications (ArduSub/ArduRover).

mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.


HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.

Queens-Rocket-Engineering-Team/av-power
QRET Avionics PCBs and firmware for delivering power to SRAD PCBs


Atif6894/automotive-ble-can-pcb
A small 4-layer board that sits on a vehicle's 12/24 V harness, talks CAN FD through a TCAN4550-Q1, and exposes it over Bluetooth LE through a CC2340R5-Q1.


Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.


gonewx/quadcuber
本目录是 A1 电子源目录。打开 quadcuber.kicadpro,包含原生可编辑原理图和四层 PCB、本地符号/封装库。本设计为单块PCB,RP2040、QSPI Flash、晶振、USB-C、驱动和电源均直接焊接在板上;A0的Pico H插装已移除。马达使用EV3裸插座。接线定义仍从 ../wiring/spec.py 导入,固件未改动,也没有把 R/L 固件描述成已支持四臂控制。



winson3QQ/Batman
Home project for Halow+openMANET on Pi4 & & Seeed WM1302 HAT & Wio-WM6108


mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.