

Power Module
QRET Avionics PCBs and firmware for delivering power to SRAD PCBs
- Size
- 69.5 × 62.6 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 136
- Nets
- 136
- Pads
- 496
- Tracks, vias
- 901, 287
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Jan 2026
- Updated
- 11 Sep 2026
Overview
Power Module is an open-source printed circuit board by Queens-Rocket-Engineering-Team, from the Queens-Rocket-Engineering-Team/av-power repository on GitHub. It is a 4-layer board of 69.5 × 62.6 mm with 136 parts on 136 nets, routed with 901 tracks and 287 vias.
It is built around the STM32F103CBT6, TCAN1051HGVDRQ1 and ACS37041KLHBLT-010B3, with the CP2102N-A02-GQFN20R, LM74700QDBVRQ1 and AMS1117-3.3 among its other parts. Its parts include 53 capacitors, 32 resistors, 16 ICs, 7 diodes and 7 connectors. It belongs with the STM32 boards of this library.
Main components
12STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCAN1051HGVDRQ1
SOIC-8-55℃~+125℃ 5Mbps 70mA CAN Transceiver TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Bus fault protection、Silent mode、Integrated level shifting SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversACS37041KLHBLT-010B3
SOT-23-5-W-40℃~+125℃ 0.1kVrms 1.6mΩ 125kHz 132mV/A 3V~3.6V 3us Bidirectional detection、Power-on reset Support ±10A SOT-23-5-W Current Sensors ROHSAllegro MicroSystems, LLCCurrent SensorsCP2102N-A02-GQFN20R
QFN-20-EP(3x3)-40℃~+85℃ 1.3uA 13.7mA 3Mbps 3V~3.6V、3V~5.25V USB 2.0 USB to UART QFN-20-EP(3x3) USB Converters ROHSSilicon LabsUSB ConvertersLM74700QDBVRQ1
SOT-23-6-40℃~+150℃ 11mA 15V 2.37A 20mV 3.2V~65V 65V 80uA External FET Reverse current blocking、Reverse polarity protection、With enable SOT-23-6 ORing Controllers ROHSTexas InstrumentsPower Distribution SwitchesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBY25Q128ESWIG
WSON8 6*5mmWSON86x5mm New Arrivals ROHSBOYAMICROUncategorisedAO4447A
SOIC-81 P-Channel 130nC@10V 18.5A 2.2V 3.1W 30V 5.02nF 615pF 8.2mΩ@4.5V 815pF P-Channel SOIC-8 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBZV55C12
LL-341 Independent 100nA@9.1V 11.4V~12.7V 12V 20Ω 500mW 90Ω LL-34 Zener Diodes ROHSLGEZener DiodesSI2305CDS
SOT-23-3(TO-236-3)-55℃~+150℃ 1 P-Channel 1.7W 1V 300pF 30nC@8V 330pF 5.8A 65mΩ@1.8V 8V 96pF P-Channel SOT-23 MOSFETs ROHSVishay IntertechnologyMOSFETsSMAJ30CA
DO-214AC(SMA)-55℃~+150℃ 1 30V 33.3V 400W 48.4V 5uA 8.3A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)X322516MMB4SI
SMD3225-4P-40℃~+85℃ 10pF 16MHz 50Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
README
README.mdAvionics Power Delivery (Power Module, Backplane, Screw Switch, etc)
2023-2026 Season - Power Delivery Projects
- Repo contains board's firmware, schematics, and related documentation and datasheets.
- The Main branch contains current functional hardware/software
- Branches contain board revisions/versions or planned features/fixes.
- If you're contributing, make sure you're working in a branch other than Main
Folder Structure
/Schematics: PCB design files (KiCad V8)/Firmware: Arduino C/C++ code (for STM)/Datasheets: Datasheets and reference materials
Parts
136| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C13, C15, C16, C17, C20, C21, C22, C23, C34, C46, C47, C48 |
| 10 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C28, C29, C30, C36, C44, C45 |
| 6 | 22uF | Capacitor_SMD:C_1206_3216Metric | C12, C49, C50, C51, C52, C53 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric | R14, R16, R20, R21, R24 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C24, C25, C26, C27, C37 |
| 5 | 10uF | Capacitor_SMD:C_1206_3216Metric | C9, C10, C11, C18, C19 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C38, C39, C41, C42 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R13, R15, R29, R30 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C31, C32, C40 |
| 3 | 30k | Resistor_SMD:R_0603_1608Metric | R5, R7, R11 |
| 3 | LM66100DCKR | LMR66100:SC-70-6 | U9, U10, U11 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C3, C43 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C33, C35 |
| 2 | 12k | Resistor_SMD:R_0603_1608Metric | R3, R10 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R12, R27 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric | R17, R25 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C14 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R22, R23 |
| 2 | ACS37041KLHBLT-010B3 | footprints:APS12628LLHALTBAP_HandSolder | U4, U5 |
| 2 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2 |
| 2 | LM74700QDBVRQ1 | Package_TO_SOT_SMD:SOT-23-6 | U2, U3 |
| 2 | LMR51430XDDCR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U7, U8 |
| 2 | ScrewSwitch | footprints:CONN_2-1445057-2_TYCO | J1, J3 |
| 1 | 100m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 22uH | Inductor_SMD:L_Bourns_SRN8040TA | L2 |
| 1 | 24V PWR (WHIT) | LED_SMD:LED_0805_2012Metric | D7 |
| 1 | 24V.B | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | 24V.G | TestPoint:TestPoint_Pad_1.5x1.5mm | TP13 |
| 1 | 24V.OR | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | 3.3V PWR (GRN) | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 33nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 3v3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP7 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 47uH | Inductor_SMD:L_Bourns_SRN8040TA | L1 |
| 1 | 50V 3A | Diode_SMD:D_SMA | D4 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 5V | TestPoint:TestPoint_Pad_1.5x1.5mm | TP8 |
| 1 | 5V PWR (RED) | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | 5V.S | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |
| 1 | 6.2k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 600R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 680R | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 68uH | Inductor_SMD:L_Bourns_SRN8040TA | L3 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 9.1k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U12 |
| 1 | AO4447A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | B.S | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | BATT | TestPoint:TestPoint_Pad_1.5x1.5mm | TP12 |
| 1 | BY25Q128ES | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U16 |
| 1 | BZV55C12 | Diode_SMD:D_MiniMELF | D3 |
| 1 | Battery | footprints:CONN_2-1445057-2_TYCO | J2 |
| 1 | CP2102N-A02-GQFN20R | digikey-footprints:QFN-20-1EP_3x3mm | U13 |
| 1 | DB_LED (YLW) | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | DMN6040SSD-13 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q3 |
| 1 | GSE | footprints:CONN_2-1445057-2_TYCO | J4 |
| 1 | GSE.S | TestPoint:TestPoint_Pad_1.5x1.5mm | TP9 |
| 1 | INA187A | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | SI2305CDS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | SMAJ30CA | Diode_SMD:D_SMA | D9 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U14 |
| 1 | SWD_B | SWD_Header:SWD_PinHeader_1x04_P2.54mm_Horizontal_SMD | J6 |
| 1 | SW_STM_BOOT_MODE | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | SW_STM_RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | Stack Male Edge Connector | Connector_PCBEdge:BUS_PCIexpress_x1 | J7 |
| 1 | TCAN1051HGVDR | ISO1044:SOIC_1044BDR_TEX | U15 |
| 1 | TPS61175PWPR | footprints:IC_TPS27S100BPWPR | U1 |
| 1 | USB_C_Female_USB2_Small | footprints:USB_C_DB-108PWB | J5 |
| 1 | X322516MMB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
Similar boards
- 4 layers69.5 × 60 mm

- 4 layers69.5 × 62.6 mm

Power Module
Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.
131 parts4 - 4 layers329.5 × 199.5 mm

KEPR
RapportTecnologia/kit-de-prototipacao-educacional-e-engenharia
KEPR - Kit Educacional de Prototipação Rapport, é um kit que visa trazer total flexibilidade ao desenvolvimento de sistemas embarcados e IoT, permitindo trocar facilmente o processador e até mesmo Rede e WiFi sem…
38 parts3 - 4 layers70 × 72 mm

- 2 layers51 × 61 mm

- 4 layers60 × 40 mm

RCcar
jeffreydthompson/Open_Roadster
Support files for course creating BLE remote controlled car from scratch.
95 parts1 - 2 layers154.7 × 113 mm

DeskMixer
RaduAndre/DeskMixer
DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.
113 parts3 - 4 layers42 × 65 mm

Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT
Questions
How big is the Power Module PCB?
It measures 69.5 × 62.6 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Power Module use?
136 parts, built around the STM32F103CBT6, TCAN1051HGVDRQ1, ACS37041KLHBLT-010B3 and CP2102N-A02-GQFN20R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power Module KiCad files?
From the Queens-Rocket-Engineering-Team/av-power repository on GitHub, at the commit this page was made from: the board is Schematics/Hybrid_Power_Module/Power_Module.kicad_pcb and its schematic Schematics/Backplane/Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask Queens-Rocket-Engineering-Team before reusing the design.