Skip to the content
4 layers60 × 40 mmRCcar, the printed circuit board in 3D

Support files for course creating BLE remote controlled car from scratch.

Size
60 × 40 mm
Copper layers
4
Thickness
1.6 mm
Parts
95
Nets
110
Pads
379
Tracks, vias
464, 137
Pours
25
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
23 Jan 2026
Updated
16 Oct 2026

Overview

RCcar is an open-source printed circuit board by jeffreydthompson, from the jeffreydthompson/Open_Roadster repository on GitHub. It is a 4-layer board of 60 × 40 mm with 95 parts on 110 nets, routed with 464 tracks and 137 vias.

It is built around the ESP32-S3-MINI-1-N8, DRV8833RTYR and CP2102N-A02-GQFN28R, with the MAX17048G+T10, MCP73831T-2ACI/OT-HXY and S2B-ZR-SM4A-TF(LF)(SN) among its other parts. Its parts include 34 resistors, 25 capacitors, 10 ICs, 7 transistors and 1 diode. It belongs with the ESP32 boards of this library.

Main components

12

README

README.md

Open Roadster

An open source remote control car you can build from scratch. The chassis, circuit board, firmware, and phone app are all here.

Open Roadster

Open Roadster Blueprint

What's inside

FolderWhat you'll find
Mechanicalmechanical/Chassis, steering and wheels in FreeCAD, ready-to-print STLs, a sheet metal base, and a Blender body
Circuitscircuits/A 4-layer ESP32-S3 controller board in KiCad, with order-ready files for JLCPCB
Firmwarecode/firmware/Arduino firmware for motors, steering, lights, battery monitoring and Bluetooth LE
Appcode/app/An iOS remote: tilt to steer, with throttle, gears, headlights and a fuel gauge

Each folder has its own README with the details.

The car at a glance

  • Brains: ESP32-S3 on a custom 60 × 40 mm board
  • Drive: two N20 gear motors, one per rear wheel
  • Steering: micro servo with a steering linkage
  • Power: single-cell LiPo, charged over USB-C, with a fuel gauge
  • Lights: headlights, plus tail lights that double as brake lights
  • Control: Bluetooth LE from your phone

Building one

  1. Order the circuit board. See circuits.
  2. Make the parts: print the STLs, have the sheet metal base cut, and buy the motors, servo and bearings. See mechanical.
  3. Flash the firmware over USB-C. See firmware.
  4. Install the app on your phone and drive. See app.

Next steps

A soft power switch. Right now the car is turned on and off with a plain mechanical power switch. If it's left on, it keeps drawing current until the LiPo is run flat. Over-discharging a LiPo ruins it, and a damaged cell is a fire risk the next time it's charged.

The next board revision will add a soft switch: a push button that turns the car on, with power held on by the microcontroller. The firmware can then cut power completely, for example after a period of inactivity or when the battery gets low. That way the car can never be accidentally left on to drain the battery.

Other work in progress and known issues are tracked in TODO.md.

License

  • Code (code/): MIT
  • Hardware and mechanical designs (mechanical/, circuits/): CC BY 4.0

See LICENSE for details.

The Open Source Hardware logo was designed by Macklin Chaffee and is used under a CC-SA license. Open Roadster is not OSHWA certified.

Parts

95
QtyValueFootprintReferences
910kΩRCcar:R0402R2, R3, R8, R14, R16, R19, R37, R38, R41
5100nFRCcar:C0603C11, C27, C29, C30, C32
5100nFRCcar:C0402_NEWC6, C18, C20, C22, C23
5100ΩRCcar:R0402R4, R15, R17, R18, R20
42SC2712-GR,LF(TRCcar:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BRQ3, Q4, Q7, Q8
45.1kΩRCcar:R0402R1, R5, R6, R9
310uFRCcar:C0603C7, C8, C9
322uFRCcar:C1206C5, C25, C34
3470ΩRCcar:R0603R7, R10, R11
20ΩRCcar:R0402R39, R40
210nFRCcar:C0603C28, C31
21kΩRCcar:R0603R22, R24
22.2uFRCcar:C0603C26, C33
222ΩRCcar:R0603R21, R23
24.7kΩRCcar:R0402R12, R13
24.7uFRCcar:C0805C3, C4
250mΩRCcar:R1206U4, U11
2DRV8833RTYRRCcar:QFN-16_L4.0-W4.0-P0.65-TL-EP2.6U8, U10
2S2B-ZR-SM4A-TF(LF)(SN)RCcar:CONN-SMD_S2B-ZR-SM4AL.MOTOR, R.MOTOR
2SM02B-SRSS-TB (LF)(SN)RCcar:CONN-SMD_2P-P1.00_SM02B-SRSS-TB-LF-SNB.LED, F.LED
2SS8050-GRCcar:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BRQ10, Q11
2TS-1088-AR02016RCcar:SW-SMD_L3.9-W3.0-P4.45BOOT, EN
10805G (Green)RCcar:LED0805-R-RDCHARGED
1100kΩRCcar:R0603R25
1100nFRCcar:C0402_v2C10
117-21SUYC/TR8RCcar:LED0805-R-RDCHARGING
11kΩRCcar:R0402R31
12.2uHRCcar:IND-SMD_L3.0-W3.0_FNR30XXSL1
122.1kΩRCcar:R0402R33
122uFRCcar:C0805C2
122ΩRCcar:R0402R35
14.7uFRCcar:C0402C1
147.5kΩRCcar:R0402R32
1CP2102N-A02-GQFN28RRCcar:QFN-28_L5.0-W5.0-P0.50-TL-EP3.3U6
1ESP32-S3-MINI-1-N8RCcar:BULETM-SMD_ESP32-S3-MINI-1-N8U1
1FC-2012HRK-620DRCcar:LED0805-R-RDPOWER
1HCZZ0323-3RCcar:CONN-SMD_3P-P1.50_HCZZ0323-3SERVO
1Hole_gge8842846562267455RCcar:Hole_gge8842846562267455Hole_gge8842846562267455
1Hole_gge8842846562267458RCcar:Hole_gge8842846562267458Hole_gge8842846562267458
1Hole_gge8842846562267461RCcar:Hole_gge8842846562267461Hole_gge8842846562267461
1Hole_gge8842846562267464RCcar:Hole_gge8842846562267464Hole_gge8842846562267464
1MAX17048G+T10RCcar:TDFN-8_L2.0-W2.0-P0.50-BL-EP1.2U7
1MCP73831T-2ACI/OTRCcar:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BRU9
1MS-12D08G3.5RCcar:SW-TH_MS-12D08G3.5SW2
1PH2.0-2PWBRCcar:CONN-SMD_2P-P2.00_PH2.0-SPWBBATTERY
1SI2305CDSRCcar:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BRQ1
1SP0503BAHTGRCcar:SOT-143_L2.9-W1.3-P1.92-LS2.3-BRD3
1TPS2116DRLRRCcar:SOT-583-8_L2.1-W1.6-P0.50-LS1.6-BLU3
1TPS63001DRCRRCcar:VSON-10_L3.0-W3.0-P0.50-TL-EP_TPS62410DRCRU5
1TYPE-C 16PIN 2MD(073)RCcar:USB-C-SMD_TYPE-C-6PIN-2MD-073USB

Similar boards

  • 2 layers70 × 136.4 mmKiCAD Camsat PCB, the printed circuit board in 3D

    KiCAD Camsat PCB

    National-Association-of-Rocketry-UCD/2025_NAR_CanSat

    PCB and schematic files can be accesed by downloading KiCADCamsatPCB as a zip file and then opening the KiCAD project file.

    64 parts
  • 4 layers99 × 99.3 mmDeliverable4 schematics, the printed circuit board in 3D

    Deliverable4 schematics

    satomm1/EE256Project

    Project for EE256 at Stanford University, Autumn 2023

    114 partsMIT
  • 2 layers40 × 40 mmToytalker mini v0.2, the printed circuit board in 3D

    Toytalker mini v0.2

    tomonoriyamazaki/toytalker

    AI voice companion toy for kids

    47 parts
  • 4 layers149.6 × 98 mmMch2022, the printed circuit board in 3D

    Mch2022

    kitspace-test-repos/kicad6-file-collection

    235 partsMIT
  • 4 layers70 × 72 mmSPINC AA Charger, the printed circuit board in 3D

    SPINC AA Charger

    CoretechR/SPINC

    DIY Automatic Battery Charger Using RP2040

    101 parts467GPL-3.0
  • 2 layers51 × 61 mmRHS 3, the printed circuit board in 3D

    RHS 3

    pa-pa/HB-Sec-RHS-3

    68 parts9
  • 4 layers69.5 × 62.6 mmPower Module, the printed circuit board in 3D

    Power Module

    Queens-Rocket-Engineering-Team/av-power

    QRET Avionics PCBs and firmware for delivering power to SRAD PCBs

    136 parts1
  • 4 layers50 × 80 mmPami 2026, the printed circuit board in 3D

    Pami 2026

    robotronik/cdfr2026_pamis

    Les Pamis pour la coupe de france de robotique de 2026

    147 parts1MIT

Questions

How big is the RCcar PCB?

It measures 60 × 40 mm and has 4 copper layers, 1.6 mm thick.

What parts does the RCcar use?

95 parts, built around the ESP32-S3-MINI-1-N8, DRV8833RTYR, CP2102N-A02-GQFN28R and MAX17048G+T10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RCcar KiCad files?

From the jeffreydthompson/Open_Roadster repository on GitHub, at the commit this page was made from: the board is circuits/kicad/RCcar.kicad_pcb and its schematic circuits/kicad/LED Drivers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RCcar design in my own project?

Its repository states no licence, so its author keeps all rights: ask jeffreydthompson before reusing the design.