4 layers126.6 × 37.7 mm
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT
Boards using the LM1117MP-5.0
38 boardsBoards in 37 GitHub repositories, designed in KiCad, that use the LM1117MP-5.0 by Texas Instruments. See how each wires it, with its parts, size, README and files; the LM1117MP-5.0’s symbol, footprint and pinout are on its own page.
- 2 layers20 × 107 mm
RawWavesV2
SherpaModular/RawWaves
Raw Waves is a eurorack synthesizer module that plays RAW or WAV sample files from a micro SDcard. It is a derivate work of "Radio Music" from Tom Whitwell. Raw Waves is released under a CC-by-SA 3.0 license.
55 parts26 - 2 layers44.4 × 29.3 mm
ElectronicTriggerUnit
aNThiCu/AirsoftETU
The code for a airsoft MOSFET board that includes the trigger , active break mode and semi-auto,full-auto detection.
36 parts8GPL-3.0 - 2 layers55.2 × 43.8 mm
Encabulator
imad-drs/mini_encabulator_PCB
A complete PCB design exercise demonstrating schematic capture, component selection, and board layout using KiCAD. This project implements a simple LED blinker with user-controllable blink rate.
17 parts3 - 2 layers45 × 72 mm
Relay
adarwoo/modbus_relay
A modbus RTU relay board with 3 relays for the CNC. This uses the ASX framework
43 parts1 - 4 layers75.5 × 62 mm
Bspd
chithigun23/ANUFS-BSPD-2026
ANUFS's BSPD for 2026 Formula SAE ICE Car. The goal of this project is to be AEC-Q100/Q101/Q200 compliant.
120 parts1 - 2 layers51 × 51 mm
SuperGauge
KenwoodFox/SuperGauge
This repo contains all the firmware and hardware for the SuperGauge.
32 parts1 - 2 layers169.4 × 71 mm
Transmitter PCB
PrashantHalai-212/Transmitter_PCB
A Batman inspired Batarang shaped wireless transmitter board featuring an ATmega328P microcontroller, NRF24L01 module, and onboard CH340G USB programmer.
55 parts1MIT - 2 layers37.5 × 110 mm
- 4 layers51 × 19 mm
- 4 layers160 × 60.6 mm
- 4 layers100 × 100 mm
- 4 layers80 × 100 mm
NuBiHo atmega328P
clover-clever/NuBiHo_Quad_Drone
Microprocessor Quad Drone System, based on SPRacing R3 w/Arduino PPM Control Signal
81 parts - 2 layers64.7 × 56 mm
- 2 layers48 × 40 mm
- 2 layers127.5 × 50.5 mm
Lidarsystemcopy
filipandersson3/Gait-speed-lidar-system
Lidar system for measuring walking speed using a Garmin LIDAR-Lite v3
54 parts - 2 layers
- 4 layers45 × 19 mm
- 4 layers45.7 × 19.5 mm
Arduino Nano
Hirusha785/arduino-nano-kicad-design
⚙️ Arduino Nano-compatible development board designed in KiCad for the Mastering KiCad Specialization final project. Includes schematic, PCB layout, 3D renders, BOM, and fabrication-ready files for manufacturing. 🚀📐
35 parts - 2 layers120 × 120 mm
- 4 layers47.5 × 22 mm
Arduino nano
MaheshChowdaryDamuluri/Arduino-Nano-Project
Welcome to the official repository for the Custom Arduino Nano Hardware Clone project. This repository houses the full programmatic schematic blueprints, advanced multi-layer stackup routing configurations, and…
35 partsMIT - 2 layers18 × 43.2 mm
- 2 layers103.8 × 50.9 mm
FINAL final
PavitpalSingh2004/TRUESENSE_V2
TrueSense V2 is a compact high-speed reflection spectrometer using the Hamamatsu C12880MA, ESP32-S3, custom PCBs, high-speed ADC acquisition, FT2232H USB, Wi-Fi/UDP streaming, and a PyQt6 GUI for real-time spectrum…
113 parts - 2 layers56.5 × 61.5 mm
Arduino Nano
Rehmanchaudhary/custom-pcb-design
Custom Arduino Nano–compatible board — full schematic and PCB design in KiCad, physically etched and soldered
39 parts