Skip to the content
2 layersAK4490DAC, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
156
Pads
187
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
11 Sep 2026
Updated
25 Sep 2026

Overview

AK4490DAC is an open-source printed circuit board by fTomo-robot, from the fTomo-robot/AK4490DAC repository on GitHub. It is a 2-layer board with 14 parts on 156 nets.

It is built around the AK4118AEQ, AK4490EN and LM1117MP-3.3, with the TL072-P8, TCM809RENB713 and LM1117MP-5.0 among its other parts. Its parts include 13 ICs and 1 transistor.

Main components

8

README

README.md

AK4490DAC

AKM(旭化成エレクトロニクス)の AK4490(32bit プレミアムDAC)と AK4118(SPDIFレシーバー)を使ったUSB DACのKiCadプロジェクト。

経緯

元の回路図(Eagle形式、NEWDAC.sch)はWindows PC上にのみ存在しており、このリポジトリ作成時点では発見できていません。 このプロジェクトは、JLCPCBに発注した際の製造データ(ガーバー・BOM・部品配置データ)から構成部品を復元し、KiCadで新規に組み直した上で、USB入力段・電源・出力段を改良したものです。

  • reference/NEWDAC_original_BOM.txt : 元のEagle回路図から書き出された部品表(オリジナル、参考用)
  • reference/PnP_NEWDAC_*.txt : 元の部品配置(Pick & Place)データ(参考用)

回路構成(改良版)

text
PC --USB--> SA9227(非同期USBオーディオ) --I2S--------------------+
                                                                  |
   (同軸/光)--SPDIF--> DA103C(絶縁トランス) --> AK4118(SPDIFレシーバ)
                                                    |  I2S        |
                                                    v              v
                                                74LS157(2:1 I2Sセレクタ)
                                                                  |
                                                                  v
                                                             AK4490(DAC)
                                                                  |  差動アナログ出力
                                                                  v
                                                    MUSES8920 x3(差動→SE変換 + LPF)
                                                                  |
                                                                  v
                                                              ライン出力
  • USB入力(U2 SA9227): Savitech製の非同期USBオーディオストリーミングコントローラ。32bit/384kHzまで対応し、旧PCM2704C(16bit/48kHz止まり)のボトルネックを解消。SPDIF送受信も内蔵
    • 要注意: SA9227は動作に外部I2C EEPROM(U8, 24LC02)へのファームウェア書き込みが必須。書き込み用のファームウェアイメージは別途入手が必要
  • 入力切り替え(U7, 74LS157): USB(SA9227のI2S出力)とSPDIF(AK4118のI2S出力)を1系統に統合してAK4490へ
  • 絶縁(T1, DA103C): Murata製パルストランスでSPDIF入力経路をガルバニック絶縁
  • SPDIF受信(U5, AK4118): 同軸/光デジタル入力を受信・PLLでクロック再生成しI2Sに変換
  • D/A変換(U6, AK4490): 差動電流出力を生成。リファレンス電圧まわりは徹底したデカップリング
  • 出力段(IC5-7, MUSES8920): 旧TL072から低ノイズ・低歪みのオーディオ用オペアンプに変更(ピン互換のドロップイン)
  • 電源(IC1-4, ADP7142): 旧LM1117(ノイズ大きめの汎用LDO)から、Analog Devices製の低ノイズLDOに変更。3.3V×3・5.0V×1
  • リセット(U3/U4, TCM809): AK4118・AK4490それぞれのパワーオンリセットシーケンシング

注意事項

  • AK4118 / AK4490 / DA103C / SA9227 のシンボル・フットプリントは、旭化成系は過去の検証済みEagleライブラリから、SA9227は公式データシート(Savitech BRAVO-DSD SA9227 v1.3)のピン配置表から復元したもの
  • 実際の配線(ネット接続)はまだ行っていない。KiCad上で全ICを配置しただけの状態
  • SA9227のファームウェア(EEPROM書き込みイメージ)は別途入手・準備が必要
  • ADP7142/MUSES8920/TCM809/BSS138/74LS157はKiCad標準ライブラリのシンボル・フットプリントをそのまま使用

次回作業予定(方針変更)

USB入力段について、SA9227のファームウェア/EEPROM書き込みが手間・コスト面で見合わないと判断し、方針を変更することにした(2026-09-12時点、回路図は未反映):

  • USB入力ICの自作(SA9227)はやめる。市販の完成品コンバータを外付けで使う
    • 候補: Cubilux USB-C to SPDIF(TOSLINK)変換アダプタ(¥2,500前後、48kHz/24bit〜192kHz/24bit、ドライバ不要)
    • 元のBOMがUSB Type-Cコネクタ(TYPE-C-31-M-12)だったため、変換アダプタもそのまま挿せる
  • 上記に伴い、次回は回路図から U2(SA9227)・U8(24LC02 EEPROM)・U7(74LS157マルチプレクサ)を撤去
  • 代わりに AK4118のSPDIF入力(RX0ピン)へTOSLINK光入力ジャックを追加
  • 検討したが採用しなかった他のUSB IC案(参考): PCM2704C(現状維持案)、TE7022L(EEPROM任意で24bit/96kHz)、CM6631A(LQFP-100・要ファーム)、CP2114(Silicon Labs製・EOL/48kHz止まりのため見送り)、Amanero Combo384モジュール(高性能だが¥15,400と割高)

Parts

14
QtyValueFootprintReferences
3LM1117MP-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2IC1, IC2, IC3
3TL072PPackage_DIP:DIP-8_W7.62mmIC5, IC6, IC7
2TCM809RENB713Package_TO_SOT_SMD:SOT-23U3, U4
1AK4118Package_QFP:LQFP-48_7x7mm_P0.5mmU5
1AK4490Package_QFP:LQFP-48_7x7mm_P0.5mmU6
1BSS138Package_TO_SOT_SMD:SOT-23Q1
1LM1117MP-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2IC4
1PCM2704CDBRPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU2
1SN74LS06NSRPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1

Similar boards

  • 4 layers142.3 × 105.7 mmQmtech minimig, the printed circuit board in 3D

    Qmtech minimig

    ranzbak/qmtech_minimig

    KiCad design for a minimig compatible board for the QM_XC7A100T_DDR3 board.

    222 parts24
  • 2 layers380 × 45 mmAddOnC, the printed circuit board in 3D

    AddOnC

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    97 parts226CC-BY-SA-4.0
  • 4 layers76.9 × 56.5 mmSpdif recv ak4118 ak4137, the printed circuit board in 3D

    Spdif recv ak4118 ak4137

    schenkmi/electronic-projects

    misc electronic projects

    87 parts6CERN-OHL-W-2.0
  • 4 layers100 × 100 mmIchnaeaV2, the printed circuit board in 3D

    IchnaeaV2

    brandonbraun653/Ichnaea

    2KW Solar Charge Controller w/MPPT

    444 partsMIT
  • 4 layers126.6 × 37.7 mmGruzik2.0, the printed circuit board in 3D

    Gruzik2.0

    NYDEREK/LineFollower_GRUZIK2.0-light

    GRUZIK2.0 is simple light construction made for "line follower light" competition

    50 parts101MIT
  • 4 layers160 × 60.6 mmRegin, the printed circuit board in 3D

    Regin

    awtismlover/Regin-Line-follower-v1

    53 parts
  • 2 layers127.5 × 50.5 mmLidarsystemcopy, the printed circuit board in 3D

    Lidarsystemcopy

    filipandersson3/Gait-speed-lidar-system

    Lidar system for measuring walking speed using a Garmin LIDAR-Lite v3

    54 parts
  • 2 layers103.8 × 50.9 mmFINAL final, the printed circuit board in 3D

    FINAL final

    PavitpalSingh2004/TRUESENSE_V2

    TrueSense V2 is a compact high-speed reflection spectrometer using the Hamamatsu C12880MA, ESP32-S3, custom PCBs, high-speed ADC acquisition, FT2232H USB, Wi-Fi/UDP streaming, and a PyQt6 GUI for real-time spectrum…

    113 parts

Questions

What parts does the AK4490DAC use?

14 parts, built around the AK4118AEQ, AK4490EN, LM1117MP-3.3 and TL072-P8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AK4490DAC KiCad files?

From the fTomo-robot/AK4490DAC repository on GitHub, at the commit this page was made from: the board is AK4490DAC.kicad_pcb and its schematic .codex-work/power-cleanup/before.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AK4490DAC design in my own project?

Its repository states no licence, so its author keeps all rights: ask fTomo-robot before reusing the design.