

SuperGauge
This repo contains all the firmware and hardware for the SuperGauge.
- Size
- 51 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 50
- Pads
- 158
- Tracks, vias
- 354, 86
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Sep 2023
- Updated
- 30 Nov 2023
Overview
SuperGauge is an open-source printed circuit board by KenwoodFox, from the KenwoodFox/SuperGauge repository on GitHub. It is a 2-layer board of 51 × 51 mm with 32 parts on 50 nets, routed with 354 tracks and 86 vias.
It is built around the ATMEGA16U2-MU, LM1117MP-5.0 and MBR0520L-TP. Its parts include 10 resistors, 8 capacitors, 5 diodes, 4 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA16U2-MU
QFN-32-EP(5x5)-40℃~+85℃ 16KB 16MHz 2.7V~5.5V 22 512Byte 512Byte 8 Bit AVR Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM1117MP-5.0
SOT-223Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTexas InstrumentsMBR0520L-TP
SOD-123-65℃~+125℃ 1 Independent 20V 385mV@0.5A 5.5A 500mA 75uA@20V SOD-123 Schottky Diodes ROHSMicro Commercial ComponentsSchottky Diodes
README
README.mdSuperGauge

This repo contains all the firmware and hardware for the SuperGauge.
If you're looking for the latest docs/builds, see our Releases Page.
Getting Started
First, clone this repo (and optionally checkout a branch)
git clone https://github.com/KenwoodFox/SuperGauge.git
cd SuperGaugeInit Submodules
Some libraries and resources are included as submodules, run the following command to initialize them before opening the main sch
(If you get a missing library error, make sure to do this)
git submodule update --init --recursiveProject Layout
If you want to use this project template for yourself, you can find it here!
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R101, R102, R103, R104 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C102, C103 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R109, R110 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C107, C108 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric | R105, R108 |
| 2 | 22pf | Capacitor_SMD:C_0603_1608Metric | C105, C106 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric | R106, R107 |
| 2 | BACKLIGHTING | LED_THT:LED_D5.0mm_Clear | D102, D103 |
| 1 | 10uf | Capacitor_SMD:CP_Elec_4x3 | C101 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C104 |
| 1 | ATmega16U2 | Package_QFP:TQFP-32_7x7mm_P0.8mm | U103 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y101 |
| 1 | LM1117MP-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U105 |
| 1 | LOGO | KenwoodFox:KITSUNE_LOGO | G*** |
| 1 | MBR0520LT | Diode_SMD:D_SOD-123 | D105 |
| 1 | MainConn | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J102 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D101 |
| 1 | STAT | LED_SMD:LED_0805_2012Metric | D104 |
| 1 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U104 |
| 1 | Tag Connect | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J103 |
| 1 | USBC | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J101 |
| 1 | ~ | KenwoodFox:X27-168 | U101 |
Similar boards
- 2 layers70.9 × 45.6 mm

- 2 layers82 × 52 mm

EmoePower V1.0
emoestudio/EmoePower
A DIY Buck-Boost Power Supply for Laboratory works and personal use, based on LM5175 and ESP32.
72 parts20GPL-3.0 - 2 layers54.5 × 37 mm

- 4 layers160 × 99.5 mm

High Current Driver
Strathclyde-EQOP/Vernier-Current-Driver
The Vernier Current Driver is an ultra low noise, programmable, bi-polar current source. It comes in two flavours:
248 parts9CC-BY-SA-4.0 - 2 layers35 × 75 mm

- 2 layers13.1 × 2.1 mm

- 2 layers60.8 × 31 mm

- 4 layers58.4 × 62.2 mm

Daybreak mk3b
reedtaylor/daybreak_mk3
A PCB interface between the Decent Espresso DE1 and USB or Adafriuit Feather HUZZAH32 EESP32
63 parts3
Questions
How big is the SuperGauge PCB?
It measures 51 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SuperGauge use?
32 parts, built around the ATMEGA16U2-MU, LM1117MP-5.0 and MBR0520L-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SuperGauge KiCad files?
From the KenwoodFox/SuperGauge repository on GitHub, at the commit this page was made from: the board is Hardware/SuperGauge/SuperGauge.kicad_pcb and its schematic Hardware/SuperGauge/SuperGauge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SuperGauge design in my own project?
Its repository states no licence, so its author keeps all rights: ask KenwoodFox before reusing the design.