Skip to the content

Boards using the ESD2CAN24DBZRQ1

17 boards

Boards in 15 GitHub repositories, designed in KiCad, that use the ESD2CAN24DBZRQ1 by Texas Instruments (-55℃~+150℃ 2 210W@8/20us 24V 35.5V 37V 3pF 5.7A@8/20us 50nA Bidirectional ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the ESD2CAN24DBZRQ1’s symbol, footprint and pinout are on its own page.

  • 4 layers52 × 74 mmFRC Sensor CAN, the printed circuit board in 3D

    FRC Sensor CAN

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    144 parts1
  • 4 layers100 × 150 mmPCB336, the printed circuit board in 3D

    PCB336

    marcorispoli/PCB336

    (Z275) PCB-25-336 Scheda Filamento Z275

    256 parts1
  • 2 layers175 × 120 mmJackOfAllTradesV2p0, the printed circuit board in 3D

    JackOfAllTradesV2p0

    czalinski/ThlHwTestDevices

    KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.

    172 partsMIT
  • 2 layers39 × 49 mmAdc to can, the printed circuit board in 3D

    Adc to can

    Diavolo-v/ADC-to-CAN-Module

    Design of ADC-to-CAN measurement module for Formula Student

    34 parts
  • 4 layers54 × 86 mmEgolf monitor, the printed circuit board in 3D

    Egolf monitor

    ewfuentes/egolf_monitor

    108 parts
  • 4 layers143.1 × 87.6 mmThermistor Expansion Module, the printed circuit board in 3D

    Thermistor Expansion Module

    Gad9889/Thermistor-Expansion-Module

    KiCad project files remain at the repository root. Hierarchical schematic sheets are organized under schematics/, with connector sheets in schematics/connectors/ and gate sheets in schematics/gates/.

    114 parts
  • 4 layers60 × 60 mmBLDC Controller, the printed circuit board in 3D

    BLDC Controller

    HSabinoR/K-9R

    A Low-Cost (hopefully) Robotic Dog

    84 parts
  • 4 layers72.5 × 34 mmXr25, the printed circuit board in 3D

    Xr25

    KreativeName1/Renault-PiDash

    digital gauge pods for the Renault 19 and other cars

    47 partsMIT
  • 4 layers45.5 × 51 mmCanBus Sniffer v1, the printed circuit board in 3D

    CanBus Sniffer v1

    Kubakl11/CAN_Bus_Sniffer_BP

    The bachelor’s thesis is focused on the design and implementation of a system for CAN bus data analysis for automotive monitoring.

    78 parts
  • 4 layers98 × 53 mm2025 rover CAN board, the printed circuit board in 3D

    2025 rover CAN board

    maramirok/Rover-arm-hardware

    Custom motor control PCB for the Space Concordia Mars rover robotic arm, designed in KiCad.

    73 parts
  • 2 layersMacropad, the printed circuit board in 3D

    Macropad

    moonbeeper/moonpad

    109 partsMIT
  • 2 layers100 × 95 mmRRFExtRP2040, the printed circuit board in 3D

    RRFExtRP2040

    nyarurato/RRFExtRP2040Board

    DIY Duet3 Extension Board

    92 parts
  • 4 layers30 × 87.6 mm26-107-2 MAIN, the printed circuit board in 3D

    26-107-2 MAIN

    SCRB-Hardware/SCRB-26-107

    BlueBus Status Indicator

    54 parts
  • 4 layers100 × 150 mmNCU, the printed circuit board in 3D

    NCU

    sebhalldesigns/NCU

    NCU (Network Control Unit)

    323 partsMIT
  • 4 layers25.4 × 38.1 mmSom, the printed circuit board in 3D

    Som

    embedconsult/quadesc

    BeagleConnect QuadESC is a four-motor power board with BeagleConnect Torque installed as its system-on-module. This repository contains the editable mainboard and module designs, schematics, firmware sources and…

    69 parts9
  • 4 layers52 × 64 mmPrerouted, the printed circuit board in 3D

    Prerouted

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    124 parts1
  • 2 layers100 × 100 mmPocCanV1p0, the printed circuit board in 3D

    PocCanV1p0

    czalinski/ThlHwTestDevices

    KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.

    26 partsMIT