

Adc to can
Design of ADC-to-CAN measurement module for Formula Student
- Size
- 39 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 65
- Pads
- 129
- Tracks, vias
- 174, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 Oct 2026
- Updated
- 31 Oct 2026
Overview
Adc to can is an open-source printed circuit board by Diavolo-v, from the Diavolo-v/ADC-to-CAN-Module repository on GitHub. It is a 2-layer board of 39 × 49 mm with 34 parts on 65 nets, routed with 174 tracks and 0 vias.
It is built around the TCAN332D, SM4T21AY and ESD2CAN24DBZRQ1, with the SS34 among its other parts. Its parts include 9 capacitors, 6 resistors, 6 connectors, 4 diodes and 3 ICs. It belongs with the STM32 boards of this library.
Main components
4TCAN332D
SOIC-8-40℃~+125℃ 1Mbps 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversSM4T21AY
SMA(DO-214AC)-55℃~+150℃ 18V 200nA 22.2V 39.3V 400W@10/1000us 59A@8/20us TVS Unidirectional SMA(DO-214AC) ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)ESD2CAN24DBZRQ1
SOT-23-55℃~+150℃ 2 210W@8/20us 24V 35.5V 37V 3pF 5.7A@8/20us 50nA Bidirectional ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdADC-to-CAN-Module
Design of a compact ADC-toCAN measurement module for Formula Student
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C8, CHF1 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R5, R6, R8 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J3 |
| 2 | SM4T21AY | Diode_SMD:D_SMA | D4, D5 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | CBOOT1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 15uH | Inductor_SMD_Wurth:L_Wurth_WE-LQSH-3012 | L1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | Cvcc1 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | Cn1 |
| 1 | 4,7uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | Conn_01x03 | 691101710003:CONN3x1_691101710003_WRE | J4 |
| 1 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J5 |
| 1 | ESD2CAN24DBZRQ1 | ESD2CAN24DBZRQ1:SOT-23_DBZ_TEX | D6 |
| 1 | LMR36503-Q1-3V3 | LMR36503MSC3RPERQ1:RPE0009A | U1 |
| 1 | POWER_IN | 691101710002:CONN2_WR-TBL-SERIES101_691101710002_WRE | J1 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | STM32G0B1CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TCAN332 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
The 31 most common of 34 parts.
Similar boards
- 2 layers100 × 95 mm

- 4 layers40 × 40 mm

Auv sensor hub
ginomcfino/auv-sensor-hub
STM32-based sensor hub for autonomous underwater vehicles, integrating CAN bus communication, inertial and pressure sensing, and multi-rail power regulation.
59 parts - 4 layers52 × 74 mm

FRC Sensor CAN
barkinvar/sugerCANe
A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.
144 parts1 - 4 layers100 × 150 mm

- 2 layers175 × 120 mm

JackOfAllTradesV2p0
czalinski/ThlHwTestDevices
KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.
172 partsMIT - 4 layers54 × 86 mm

- 4 layers143.1 × 87.6 mm

Thermistor Expansion Module
Gad9889/Thermistor-Expansion-Module
KiCad project files remain at the repository root. Hierarchical schematic sheets are organized under schematics/, with connector sheets in schematics/connectors/ and gate sheets in schematics/gates/.
114 parts - 4 layers60 × 60 mm

Questions
How big is the Adc to can PCB?
It measures 39 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adc to can use?
34 parts, built around the TCAN332D, SM4T21AY, ESD2CAN24DBZRQ1 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adc to can KiCad files?
From the Diavolo-v/ADC-to-CAN-Module repository on GitHub, at the commit this page was made from: the board is adc-to-can-Kicad/adc-to-can.kicad_pcb and its schematic adc-to-can-Kicad/adc-to-can.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adc to can design in my own project?
Its repository states no licence, so its author keeps all rights: ask Diavolo-v before reusing the design.