
CAN ECU
dhruxraj/stm32-can-ecu
A compact, "ECU-style" CAN node for learning and prototyping automotive-type embedded software. It has an STM32G4 MCU, a CAN transceiver with protection and switchable termination, a 6-axis IMU, a protected 8-18 V…

STM32-based sensor hub for autonomous underwater vehicles, integrating CAN bus communication, inertial and pressure sensing, and multi-rail power regulation.
Auv sensor hub is an open-source printed circuit board by ginomcfino, from the ginomcfino/auv-sensor-hub repository on GitHub. It is a 4-layer board of 40 × 40 mm with 59 parts on 78 nets, routed with 160 tracks and 101 vias.
It is built around the TCAN332D, LM2596S-5.0 and MS5837-30BA, with the AP2112K-3.3, BNO085 and TLV75533PDBV among its other parts. Its parts include 28 capacitors, 9 resistors, 7 ICs, 5 diodes and 1 transistor. It belongs with the sensors and measurement boards and the STM32 boards of this library.
A sensor-hub design for an autonomous underwater vehicle, combining an STM32 microcontroller, CAN communication, inertial and pressure sensing, and multiple power rails.
Status: CAD design study; not yet fabricated or bench-tested. ERC, DRC, and schematic-to-board checks report zero findings in KiCad 10.0.5 under the saved project rules.
This is my manually developed circuit and PCB design. Component libraries, manufacturer models, and other supplied assets retain their original attribution.
Open hardware/AUV_SENSOR_HUB.kicad_pro with KiCad 10 and its standard symbol, footprint, and 3D model libraries.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C8, C14, C15, C16, C22, C23, C24, C25, C26, C27, C28 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C12, C18, C20, C21 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C11, C17, C19 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R8, R9 |
| 2 | 100pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 10Ω | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 47uF | Capacitor_SMD:C_1206_3216Metric | C3, C6 |
| 2 | PESD1CAN | Diode_SMD:D_SOD-323 | D2, D3 |
| 1 | 100Ω @ 100MHz | Inductor_SMD:L_CommonModeChoke_Murata_DLW5BTMxxxSQ2x_5x5mm | FL1 |
| 1 | 12V | Diode_SMD:D_SOD-123 | D4 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_8x10 | C7 |
| 1 | 33uH | Inductor_SMD:L_Wuerth_WE-PD2-Typ-L | L1 |
| 1 | 600Ω @ 100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BNO085 | BNO085:IC_BNO085 | U5 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J1 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | MS5837-30BA | Sensor_Pressure:TE_MS5837-xxBA | U4 |
| 1 | SI2301CDS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SMBJ18A | Diode_SMD:D_SMB | D1 |
| 1 | SS34 | Diode_SMD:D_SMA | D5 |
| 1 | STM32F072C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | TCAN332 | Package_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |

dhruxraj/stm32-can-ecu
A compact, "ECU-style" CAN node for learning and prototyping automotive-type embedded software. It has an STM32G4 MCU, a CAN transceiver with protection and switchable termination, a 6-axis IMU, a protected 8-18 V…


renatorgr/Boards
Hardware and firmware for the AgOpenGPS AiO v4.5 autosteer boards: Teensy 4.1 firmware with its own web page (GPS, IMU, autosteer), a XIAO ESP32 Wi-Fi status page, XIAO adapter boards, and an Arduino Nano sprayer…

sreedharRP/TT_0.4_Control_Unit_PCB_design
PCB Design File of TT_0.4 AUV

jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

mohamed1920said/STARTUP
KiCad 10 carrier board for the AMR central gateway firmware. The board accepts an ESP32-S3-DevKitC-1-N8R8, adds a soldered RFM95W 868 MHz radio, protected sensor interfaces, regulated 7-18 V input, an enclosure-button…


It measures 40 × 40 mm and has 4 copper layers, 1.6 mm thick.
59 parts, built around the TCAN332D, LM2596S-5.0, MS5837-30BA and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ginomcfino/auv-sensor-hub repository on GitHub, at the commit this page was made from: the board is hardware/AUV_SENSOR_HUB.kicad_pcb and its schematic hardware/AUV_SENSOR_HUB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ginomcfino before reusing the design.