

MTAG V2 0
- Size
- 32.4 × 26.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 99
- Pads
- 336
- Tracks, vias
- 500, 257
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Sep 2024
- Updated
- 4 Feb 2025
Overview
MTAG V2 0 is an open-source printed circuit board by tyson-lin, from the tyson-lin/mtag2.1 repository on GitHub. It is a 4-layer board of 32.4 × 26.2 mm with 88 parts on 99 nets, routed with 500 tracks and 257 vias.
It is built around the ESP32-S3FN8, MS5837-30BA and MIC5219-3.3YM5, with the AP2112K-3.3, BQ24075RGT and ICM-20948 among its other parts. Its parts include 36 capacitors, 27 resistors, 11 ICs, 5 connectors and 3 diodes. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3FN8
QFN-56-EP(7x7)Watchdog reset、Software reset、Built-in general-purpose timer、Built-in temperature sensor、Touch function、True random number generator (TRNG)、Storage encryption、Infrared remote control QFN-56-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)MS5837-30BA
SMD-4PSMD-4P Pressure Sensors ROHSTE ConnectivityPressure SensorsMIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorisedAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedBQ24075RGT
QFN-16-EP(3x3)-40℃~+125℃ 1.5A 4.2V 4.35V~6.4V 6.5uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementICM-20948
QFN-24(3x3)-40℃~+85℃ 0.5KB 1.71V~3.6V 16bit 8uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersMIC5247-1.8YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 150mA 150mV@(150mA) 30uVrms 50dB@(1kHz) 6V 85uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMTAG 2.1 0 EECS 473
Code
The code for the ESP32-S3 on the PCB is located in mtag2.1-espidf/espidf on branch main. All of the interfaces are in the components folder.
GUI
The .js, .css, and .html files are located in the gui folder. Run the shell script ./run_wsl/sh or ./run_mac.sh depending on your computer's operating system to host the server. You also need to connect to the ESP32's WiFi in order to receive data from the tag.
PCB Design
All PCB design files are on the peeceebee branch inside the pcb_* folders. These PCBs were all designed in KiCAD.
Post Processing
MATLAB scripts are in the matlab_scripts folder. There is currently only one script, which is to extrapolate heartrate from NIRS data.
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 1.0uf | MTAG_V2:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C9, C12, C13, C17, C18, C30 |
| 12 | 10kΩ | MTAG_V2:R_0402_1005Metric | R4, R6, R7, R8, R9, R10, R20, R21, R22, R23, R24, R25 |
| 10 | 0.1uf | MTAG_V2:C_0402_1005Metric | C16, C19, C20, C22, C23, C32, C33, C34, C35, C36 |
| 6 | 1.13kΩ | MTAG_V2:R_0402_1005Metric | R1, R2, R14, R15, R18, R19 |
| 4 | 12pf | MTAG_V2:C_0402_1005Metric | C21, C24, C25, C26 |
| 3 | C | MTAG_V2:C_0402_1005Metric | C27, C28, C29 |
| 2 | 4.7uf | MTAG_V2:C_0603_1608Metric | C8, C11 |
| 2 | MIC5219-3.3YM5 | MTAG_V2:SOT-23-5 | U2, U3 |
| 1 | 0 | MTAG_V2:R_0402_1005Metric | R12 |
| 1 | 0.47uf | MTAG_V2:C_0402_1005Metric | C10 |
| 1 | 1.6kΩ | MTAG_V2:R_0402_1005Metric | R26 |
| 1 | 1.87kΩ | MTAG_V2:R_0402_1005Metric | R5 |
| 1 | 10000pf | MTAG_V2:C_0402_1005Metric | C15 |
| 1 | 100pf | MTAG_V2:C_0402_1005Metric | C31 |
| 1 | 10mΩ | MTAG_V2:R_0612_1632Metric | R3 |
| 1 | 10uf | MTAG_V2:C_0805_2012Metric | C14 |
| 1 | 2.0nH | MTAG_V2:L_0402_1005Metric | L1 |
| 1 | 200kΩ | MTAG_V2:R_0402_1005Metric | R17 |
| 1 | 24nH | MTAG_V2:L_0402_1005Metric | L2 |
| 1 | 300kΩ | MTAG_V2:R_0402_1005Metric | R16 |
| 1 | 300Ω | MTAG_V2:R_0402_1005Metric | R27 |
| 1 | 32.768KHz | MTAG_V2:Crystal_32.768KHz_Geyer | Y2 |
| 1 | 40MHz | MTAG_V2:Crystal_40MHz_Kyocera | Y1 |
| 1 | 499Ω | MTAG_V2:R_0402_1005Metric | R11 |
| 1 | 693072010801 | MTAG_V2:microSD_693072010801 | U11 |
| 1 | AP2112K-3.3 | MTAG_V2:SOT-23-5 | U1 |
| 1 | Antenna | MTAG_V2:Johanson_2450AT18A0100 | AE1 |
| 1 | BQ24075RGT | MTAG_V2:VQFN-16-1EP_BQ24075RGT | U4 |
| 1 | BQ27441-G1 | MTAG_V2:S-PDSO-N12_BQ27441-G1 | U5 |
| 1 | Batt+ | MTAG_V2:+_Pad | J2 |
| 1 | Batt- | MTAG_V2:-_Pad | J3 |
| 1 | Blue | MTAG_V2:SunLED_0805_2012Metric | D3 |
| 1 | ESP32-S3FN8 | MTAG_V2:QFN-56-1EP_ESP32-S3 | U6 |
| 1 | Green | MTAG_V2:SunLED_0805_2012Metric | D2 |
| 1 | Hall Header | MTAG_V2:Hall_Pad | J5 |
| 1 | ICM-20948 | MTAG_V2:InvenSense_QFN-24_3x3mm_P0.4mm | U10 |
| 1 | L | MTAG_V2:L_0402_1005Metric | L3 |
| 1 | MIC5247-1.8YM5-TR | MTAG_V2:SOT-23-5 | U7 |
| 1 | MS5837-30BA | MTAG_V2:MS5837-30BA-4-SMD | U9 |
| 1 | R | MTAG_V2:R_0402_1005Metric | R13 |
| 1 | Red | MTAG_V2:SunLED_0805_2012Metric | D1 |
| 1 | TCA39306DDFR | MTAG_V2:DDF-TSOT-23-8 | U8 |
| 1 | UART Header | MTAG_V2:UART_Header_1.27mm | J4 |
| 1 | USB Header | MTAG_V2:USB_Header_2mm | J1 |
More from tyson-lin/mtag2.1
1- 2 layers19.9 × 17.3 mm

Similar boards
- 4 layers40 × 40 mm

Auv sensor hub
ginomcfino/auv-sensor-hub
STM32-based sensor hub for autonomous underwater vehicles, integrating CAN bus communication, inertial and pressure sensing, and multi-rail power regulation.
59 parts - 2 layers224 × 90.4 mm

TT 0.4 Control board!
sreedharRP/TT_0.4_Control_Unit_PCB_design
PCB Design File of TT_0.4 AUV
68 partsMIT - 5 layers62 × 52 mm

Tideband
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
24 parts - 4 layers16 × 23.6 mm

- 4 layers48.5 × 25 mm

- 4 layers35.5 × 14.7 mm

- 4 layers55 × 55 mm

- 2 layers29 × 23 mm

MCU
Ironman-007/Digital_Artifact
Input devices: - mouse encoder: https://www.amazon.com/gp/product/B0CF9FS3QS/ref=ppxyodtbasintitleo00s00?ie=UTF8&psc=1 - thumb joystick: https://www.adafruit.com/product/5628 - thumbwheel: -…
36 parts1
Questions
How big is the MTAG V2 0 PCB?
It measures 32.4 × 26.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MTAG V2 0 use?
88 parts, built around the ESP32-S3FN8, MS5837-30BA, MIC5219-3.3YM5 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MTAG V2 0 KiCad files?
From the tyson-lin/mtag2.1 repository on GitHub, at the commit this page was made from: the board is pcb_mtag2.0/MTAG_V2_0.kicad_pcb and its schematic pcb_ekg_adc/pcb_ekg_adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MTAG V2 0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask tyson-lin before reusing the design.