Skip to the content
12345

MIC5219-3.3YM5

Microchip Technology

3.3V 500mA Peak Output Low Drop-Out (LDO) Regulator

Part id
microchip/MIC5219-3.3YM5
Category
Uncategorised
Package
SOT23-5
Pins
5
Used on
117 open-source boards

Overview

The MIC5219-3.3YM5 is an uncategorised made by Microchip Technology in a SOT23-5 package with 5 pins. 3.3V 500mA Peak Output Low Drop-Out (LDO) Regulator.

PCBKit's library has its KiCad symbol (Regulator_Linear:MIC5219-3.3YM5, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 117 open-source boards in 100 repositories on GitHub use it.

Symbol

1IN2GND3EN4BP5OUT
Regulator_Linear:MIC5219-3.3YM5From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the MIC5219-3.3YM5
PinNameType
1INPower in
2GNDPower in
3ENInput
4BPInput
5OUTPower out

Open-source boards using it

117See all 117
  • 2 layers80 × 50 mmThermal Camera, the printed circuit board in 3D

    Thermal Camera

    Circuit-Digest/MLX90640-Thermal-Camera

    An Open Source Thermal Imaging IR camera that you can build yourserlf

    66 parts94
  • 2 layers67.8 × 55 mmVFD Watch, the printed circuit board in 3D

    VFD Watch

    Pakue95/VFD_Watch

    Portable VFD based on IVL2-7/5 and ESP32

    67 parts41
  • 2 layers166 × 105 mmPico synth sandbox, the printed circuit board in 3D

    Pico synth sandbox

    relic-se/PicoSynth_Sandbox-hardware

    Raspberry Pi Pico digital synthesizer board with I2S stereo audio i/o, MEMS microphones, MIDI i/o, a capacitive keybed, 1602 display, 2 rotary encoders, and LiPo battery. Designed for use with CircuitPython and synthio.

    184 parts26GPL-3.0
  • 2 layers81 × 49 mmMmStep, the printed circuit board in 3D

    MmStep

    luni64/mmStep

    Stepper driver board for the sparkfun MicroMod system. Compatible to DRV8825, A4988 etc.

    39 parts14MIT
  • 2 layers49 × 75 mmDuoDrive, the printed circuit board in 3D

    DuoDrive

    ManhTi3012/DuoDrive

    Duo closed-loop brushed motor driver

    115 parts10
  • 2 layers23 × 19 mmOpenRCDG, the printed circuit board in 3D

    OpenRCDG

    dot1nt/openRCDG

    An Arduino based rc drift gyro

    28 parts8GPL-3.0
  • 2 layers17 × 21.5 mmFlockOne, the printed circuit board in 3D

    FlockOne

    RavenLRS/Flock

    Flock is an inter-craft communication system intended mainly for radio controlled vehicles

    14 parts8
  • 4 layers91 × 22 mmLC PAMV4b, the printed circuit board in 3D

    LC PAMV4b

    WMXZ-EU/LC-MARE

    low-cost marine acoustic recorder

    74 parts8MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MIC5219-3.3YM5?

Yes. The symbol is Regulator_Linear:MIC5219-3.3YM5 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MIC5219-3.3YM5?

SOT23-5, with 5 pins. Its footprint is drawn on this page.

What can replace the MIC5219-3.3YM5?

Parts like it in the library: the TPAP2125K-3.3TRG1 by TECH PUBLIC, the 4A2D by TECH PUBLIC, the TPS7A0233DBV by Texas Instruments and the APX823-29W5G by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MIC5219-3.3YM5?

117 boards in 100 repositories on GitHub; the most starred are listed on this page, with their KiCad files.