

2025 rover CAN board
Custom motor control PCB for the Space Concordia Mars rover robotic arm, designed in KiCad.
- Size
- 98 × 53 mm
- Copper layers
- 4
- Thickness
- 1.14 mm
- Parts
- 73
- Nets
- 85
- Pads
- 285
- Tracks, vias
- 664, 105
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Apr 2026
- Updated
- 23 Apr 2026
Overview
2025 rover CAN board is an open-source printed circuit board by maramirok, from the maramirok/Rover-arm-hardware repository on GitHub. It is a 4-layer board of 98 × 53 mm with 73 parts on 85 nets, routed with 664 tracks and 105 vias.
It is built around the STM32G030C8T6TR, MCP25625-E/ML and TLVM23615RDNR, with the TPD4E05U06DQAR, TLV75533PDBVR-MS and ESD2CAN24DBZRQ1 among its other parts. Its parts include 21 capacitors, 21 resistors, 8 ICs, 7 connectors and 2 crystals. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
7STM32G030C8T6TR
LQFP-48(7x7)-40℃~+85℃ 12bit 2V~3.6V 32 Bit 43 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MCP25625-E/ML
QFN-28-EP(6x6)-40℃~+125℃ 10uA 1Mbps 4.5V~5.5V CAN Controller QFN-28-EP(6x6) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversTLVM23615RDNR
QFN-11(3.5x4.5)-40℃~+125℃@(TJ) 1 1.2uA 1.5A 1V~6V 200kHz~2.2MHz 3V~36V Adjustable Buck Buck Built-in Yes QFN-11(3.5x4.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPD4E05U06DQAR
USON-10-40℃~+125℃ 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.5V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD Protection DevicesTLV75533PDBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorisedESD2CAN24DBZRQ1
SOT-23-55℃~+150℃ 2 210W@8/20us 24V 35.5V 37V 3pF 5.7A@8/20us 50nA Bidirectional ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)MTJ-88ARX1-FSM-LG
插件-40℃~+85℃ 1 Gold Phosphor bronze Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSADAM TECHEthernet Connectors / Modular Connectors (RJ45 RJ11)
README
README.mdRover Arm Hardware
Custom motor control PCB for the Space Concordia Mars rover robotic arm, designed in KiCad.
Overview
The board drives five independent DC motors on the rover arm, receives commands over CAN from the main rover controller, and provides regulated power rails for the MCU and peripherals.
Specifications
- MCU: STM32G030C8T6
- CAN controller/transceiver: MCP25625 (SPI interface)
- Motor outputs: 5 independent channels with PWM speed control and direction signals
- Power input: 16V DC
- Regulation: Buck converter + LDO (MCU/logic supply)
Contents
Schematics/— KiCad schematic filesPCB/— KiCad PCB layout filesGerbers/— Fabrication output filesBOM/— Bill of materials
Tools
Designed in KiCad. Open the project file in KiCad to view schematics and layout.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10 kΩ | SCRB_STD_Passives:R0402 | R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 6 | 0.1 uF | SCRB_STD_Passives:C0402 | C3, C11, C13, C15, C17, C18 |
| 4 | 1 uF | SCRB_STD_Passives:C0402 | C1, C10, C12, C14 |
| 4 | Conn_01x03 | footprints5:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J1, J2, J3, J7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | TPD4E05U06DQAR | SCRB_TexasInstruments:DQA0010A | U1, U2, U4, U6 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4 |
| 3 | 4.7 uF | SCRB_STD_Passives:C0805 | C2, C7, C16 |
| 2 | 0 Ohms | SCRB_STD_Passives:R0402 | R3, R4 |
| 2 | 10k | SCRB_STD_Passives:R0402 | R20, R21 |
| 2 | 12 pF | SCRB_STD_Passives:C0402 | C19, C20 |
| 2 | 22 pF | SCRB_STD_Passives:C0402 | C8, C9 |
| 2 | 22 uF | SCRB_STD_Passives:C0805 | C4, C5 |
| 2 | LED0603 | SCRB_STD_Actives:LED0603 | LD1, LD2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP6 |
| 2 | XTAL3225 | SCRB_STD_Passives:SMD3225 | Y1, Y2 |
| 1 | 0.1 uF | SCRB_STD_Passives:C0603 | C21 |
| 1 | 1 uF | SCRB_STD_Passives:C0805 | C6 |
| 1 | 10 KΩ | SCRB_STD_Passives:R0402 | R19 |
| 1 | 10 kΩ | SCRB_STD_Passives:R0805 | R6 |
| 1 | 10KΩ | SCRB_STD_Passives:R0402 | R2 |
| 1 | 40.2 KΩ | SCRB_STD_Passives:R0402 | R1 |
| 1 | 68KΩ | SCRB_STD_Passives:R0402 | R18 |
| 1 | Conn_01x03 | footprints6:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J6 |
| 1 | EDIF-4 | SCRB_Connectors:JST-GH-BM04B-GHS-TBT | J4 |
| 1 | ESD2CAN24DBZRQ1 | footprints3:SOT-23_DBZ_TEX | D1 |
| 1 | MCP25625 | SCRB_Misc_ICs:Microchip_ML28 | U3 |
| 1 | MTJ-88ARX1-FSM-LG | MTJ-88ARX1-FSM-LG:ADAMTECH_MTJ-88ARX1-FSM-LG | J5 |
| 1 | R0805 | SCRB_STD_Passives:R0805 | R5 |
| 1 | STM32G030C8T6TR | Package_QFP:LQFP-48_7x7mm_P0.5mm | U13 |
| 1 | SW_Push | SCRB_Electromechanical:SW_C913791 | SW1 |
| 1 | TLV75533PDBVR | SCRB_TexasInstruments:DBV0005A | U5 |
| 1 | TLVM23615RDNR | SCRB_TexasInstruments:RDN0011A | U7 |
Similar boards
- 4 layers30 × 87.6 mm

- 6 layers60 × 60 mm

High Temp Load Cell Toolhead Board
garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220
125 parts23GPL-3.0 - 2 layers65 × 56 mm

Central board
harshith998/ORCA-Optical-Replication-Control-Apparatus
This repository is all software/PCB schematics for the dynamic lighting system in the CASAR lab. In order to track unbiased nitrogen fixation levels, the light intensity inside their incubation vessel has to match…
64 parts - 2 layers120 × 120 mm

Modular LED Controller V4
victovats/Modular_LED_Board
Modular PCB to supply power to and control LED strips, providing input for both 5V and 12V. For the Mars Rover of the Toronto Metropolitan Robotics Team
40 parts - 2 layers120 × 120 mm

Modular Relay Board V2.1
victovats/Modular_Relay_Board_PCB_TMR
Modular relay board designed for Toronto Metropolitan Robotics featuring 4 relay circuits that isolate high-voltage inputs from low-voltage control signals to prevent interference.
78 parts - 2 layers95.3 × 95.3 mm

- 6 layers46 × 46 mm

- 4 layers73 × 33 mm

CAN485-dongle
Mehdi-Ldj/usb-can-rs485-dongle
CAN-485 diagnostic gateway — rev A hardware
77 partsCERN-OHL-P-2.0
Questions
How big is the 2025 rover CAN board PCB?
It measures 98 × 53 mm and has 4 copper layers, 1.14 mm thick.
What parts does the 2025 rover CAN board use?
73 parts, built around the STM32G030C8T6TR, MCP25625-E/ML, TLVM23615RDNR and TPD4E05U06DQAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2025 rover CAN board KiCad files?
From the maramirok/Rover-arm-hardware repository on GitHub, at the commit this page was made from: the board is hardware/2025_rover_CAN_board.kicad_pcb and its schematic hardware/2025_rover_CAN_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2025 rover CAN board design in my own project?
Its repository states no licence, so its author keeps all rights: ask maramirok before reusing the design.