This repository is all software/PCB schematics for the dynamic lighting system in the CASAR lab. In order to track unbiased nitrogen fixation levels, the light intensity inside their incubation vessel has to match environmental conditions. Our sensor module sends lux values to the lab module, which projects onto LED strips after feature extraction.
Central board is an open-source printed circuit board by harshith998, from the harshith998/ORCA-Optical-Replication-Control-Apparatus repository on GitHub. It is a 2-layer board of 65 × 56 mm with 64 parts on 71 nets, routed with 437 tracks and 162 vias.
It is built around the MAX3485ED, TPS5430DDAR and XC6220B331MR, with the AO3400A and MTJ-88ARX1-FSM-LG among its other parts. Its parts include 19 capacitors, 18 resistors, 11 connectors, 6 ICs and 6 transistors. It belongs with the lEDs and displays and sensors and measurement boards of this library.
A dynamic lighting system designed for the Cassar Lab to accurately replicate environmental light conditions inside incubation vessels for unbiased nitrogen fixation measurements in marine phytoplankton research. ORCA is a two-part system that automatically modulates light intensity within incubation vessels to match real-time environmental conditions aboard ocean research vessels. The system enables accurate measurement of nitrogen-fixing microorganism activity using the FARACAS technique.
# Clone repository
git clone https://github.com/yourusername/ORCA-Optical-Replication-Control-Apparatus.git
cd ORCA-Optical-Replication-Control-Apparatus
# Install dependencies (example for PlatformIO)
pio lib install "Adafruit VEML7700"
pio lib install "TinyGPSPlus"# Upload to sensor module
cd firmware/module
pio run --target upload
# Upload to chamber module
cd ../chamber
pio run --target upload
🧪 Testing Plan
Our comprehensive testing validates all design criteria:
1. Continuous Use Test (Reliability)
Duration: 23 hours continuous operation
Trials: 3 repetitions
Metrics: System failures, measurement standard deviation (<5%), transmission success rate (>90%)
2. Sensor Accuracy Test
Environments: Sunny outdoor, cloudy, indoor, lamp, dark
Reference: Hongnew Light Intensity Meter
Pass Criteria: <15% average error, precision ratio <2.0
3. Time of Use Test (Ease of Use)
Subjects: 10 EGR101 students
Metrics: Task completion rate (target: >80%)
4. Time of Setup Test
Target: <5 minutes
Subjects: 10 individuals
Evaluation: Identify difficult components for improvement
5. IP54 Compliance Test
Dust Test: Sand exposure with <1.0mm access probe
Water Test: Weak/medium/strong spray (simulated rain)
Trials: 2 repetitions for reliability
👥 Team
Team Orca (Duke University)
Harshith
Akira
Michael
Citlalli
Faculty Advisors
Dr. Kyle
Dr. Bucholz
Client
Cassar Lab (Dr. Niva, Dr. Merikhi)
📚 Documentation
Detailed technical documentation available in /docs:
Problem Statement & Design Criteria
Solution Evaluation & Pugh Analysis
Electrical Design Overview
Testing Procedures & Validation
User Operation Manual
🔄 Development Updates
2025 November 13th
Replaced Raspberry Pi Zero 2 W with ESP32-DevKit for chamber module
Improved ADC capabilities and resolved GPIO issues
Updated GPIO wiring documentation
📄 License
This project is licensed under the MIT License - see the LICENSE file for details.
🙏 Acknowledgments
Cassar Lab for project guidance and domain expertise
Duke University for resources and support
Open-source hardware and software communities
📞 Contact
For questions or collaboration opportunities, please open an issue or contact the team through the repository.
Note: This is an active research project. Design specifications may change as development progresses.
This repository is all software/PCB schematics for the dynamic lighting system in the CASAR lab. In order to track unbiased nitrogen fixation levels, the light intensity inside their incubation vessel has to match…
This repository is all software/PCB schematics for the dynamic lighting system in the CASAR lab. In order to track unbiased nitrogen fixation levels, the light intensity inside their incubation vessel has to match…
This repository is all software/PCB schematics for the dynamic lighting system in the CASAR lab. In order to track unbiased nitrogen fixation levels, the light intensity inside their incubation vessel has to match…
Modular PCB to supply power to and control LED strips, providing input for both 5V and 12V. For the Mars Rover of the Toronto Metropolitan Robotics Team
Modular relay board designed for Toronto Metropolitan Robotics featuring 4 relay circuits that isolate high-voltage inputs from low-voltage control signals to prevent interference.
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Central board use?
64 parts, built around the MAX3485ED, TPS5430DDAR, XC6220B331MR and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Central board KiCad files?
From the harshith998/ORCA-Optical-Replication-Control-Apparatus repository on GitHub, at the commit this page was made from: the board is hardware/central-board/central-board.kicad_pcb and its schematic hardware/central-board/central-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Central board design in my own project?
Its repository states no licence, so its author keeps all rights: ask harshith998 before reusing the design.