Skip to the content
1234567891011121314151617181920212223242526272829

MCP25625-E/ML

Microchip TechnologyExtended

-40℃~+125℃ 10uA 1Mbps 4.5V~5.5V CAN Controller QFN-28-EP(6x6) CAN Transceivers ROHS

Part id
microchip/MCP25625-E/ML
Category
CAN Transceivers
Package
QFN-28-EP(6x6)
Pins
29
In stock
2,740 at JLCPCB (C191253)
Used on
12 open-source boards

Overview

The MCP25625-E/ML is a CAN Transceiver made by Microchip Technology in a QFN-28-EP(6x6) package with 29 pins. -40℃~+125℃ 10uA 1Mbps 4.5V~5.5V CAN Controller QFN-28-EP(6x6) CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP25625T-E_ML, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-28_L6.0-W6.0-P0.65-BL-EP3.7, from EasyEDA), ready for a KiCad board. 2,740 are in stock at JLCPCB (part C191253). 12 open-source boards in 9 repositories on GitHub use it.

Symbol

1CS#2RESET#3VDD4TxCAN5RxCAN6CLKOUT7Tx0RTS#8Tx1RTS#9Tx2RTS#10RXD11VIO12CANL13CANH14NC15STBY16TXD17NC18VSS19VDDA20OSC221OSC122GND23Rx1BF#24Rx0BF#25INT#26SCK27SI28SO29EP
EasyEDA_Cloud:MCP25625T-E_MLFrom EasyEDA

Footprint

1234567891011121314151617181920212223242526272829
EasyEDA_Cloud:QFN-28_L6.0-W6.0-P0.65-BL-EP3.7From EasyEDA

From the datasheet

12
Supply, least
2.7 V · VDD, recommended operating min · p. 68
Supply, most
5.5 V · VDD, recommended operating max · p. 68
Supply, least
4.5 V · VDDA, recommended operating min · p. 71
Supply, absolute maximum
7 V · VDD, absolute max · p. 67
Works from
-40 °C · Operating ambient min · p. 67
Works up to
125 °C · Operating ambient max · p. 67
Junction, hottest
150 °C · Virtual junction temperature absolute max · p. 67
Takes working
20.03 mA · sum of VDD, VDDA and VIO max currents, recessive, controller at 25 MHz · p. 68
Takes at most
80.5 mA · sum of VDD, VDDA and VIO max currents, dominant, controller at 25 MHz · p. 71
Takes asleep
23 µA · sum of VDD sleep and VDDA standby max currents; VDDA includes VIO · p. 71
Data rate, most
1 Mbit/s · CAN bit frequency max · p. 73
Junction to air (28L-QFN 6x6 mm)
32.8 K/W · Junction to ambient typical · p. 77

What it is and has

12
CAN interface
Stand-alone CAN 2.0B controller with integrated CAN transceiver and SPI · p. 1
CAN data rate
Up to 1 Mb/s · p. 1
SPI clock
Up to 10 MHz · p. 1
Package options
SSOP-28L and 6x6 QFN-28L · p. 1
Temperature grade
Extended (E): -40°C to +125°C · p. 1
Transmit buffers
3, with prioritization and abort features · p. 1
Receive buffers
2 · p. 1
Acceptance filters and masks
6 filters and 2 masks · p. 1
SPI modes
0,0 and 1,1 · p. 1
Interrupt output
1 · p. 1
Protection
Automatic thermal shutdown · p. 1
CAN operation
Up to 1 Mb/s · p. 1

Around it

3
res 10 k
between RESET and VDD; Optional RESET pull-up. · p. 5
res 2 to 10 M
between OSC1 and OSC2; Typical feedback resistor RF in crystal/ceramic resonator circuit. · p. 28
res 1 k to 10 k
between RESET and Reset RC junction; R1 in the reset configuration example limits current from the external capacitor during RESET pin breakdown due to ESD or EOS. · p. 30

Specifications

164
ParameterConditionsAs printedPage
VDD VDDmax 7 V67
VDDA VDDAmax 7 V67
VIO VIOmax 7 V67
DC Voltage at CANH, CANLmin -58 · max 58 V67
DC Voltage at TXD, RXD, STBY w.r.t VSSmin -0.3 V67
DC Voltage at All Other I/Os w.r.t GNDmin -0.3 V67
Transient Voltage on CANH, CANLISO-7637; Figure 7-5min -150 · max 100 V67
Storage temperaturemin -55 · max 150 °C67
Operating Ambient Temperaturemin -40 · max 125 °C67
Virtual Junction Temperature TVJIEC60747-1min -40 · max 150 °C67
Soldering Temperature of Leads10 secondsmax 300 °C67
ESD Protection on CANH and CANL PinsIEC 61000-4-2min -8 · max 8 kV67
ESD Protection on CANH and CANL PinsIEC 801; Human Body Modelmin -8 · max 8 kV67
ESD Protection on All Other PinsIEC 801; Human Body Modelmin -4 · max 4 kV67
ESD Protection on All PinsIEC 801; Machine Modelmin -300 · max 300 V67
ESD Protection on All PinsIEC 801; Charge Device Modelmin -750 · max 750 V67
Supply Voltage VDDCAN controller; Extended (E)min 2.7 · max 5.5 V68
Register Retention Voltage VRETCAN controllermin 2.4 V68
High-Level Input Voltage VIHRxCANmin 2 V68
Low-Level Input Voltage VILRxCAN, TxnRTS Pinsmin -0.3 V68
Low-Level Input Voltage VILSCK, CS, SImin -0.3 V68
Low-Level Output Voltage VOLTxCAN; IOL = +6.0 mA, VDD = 4.5Vmax 0.6 V68
Low-Level Output Voltage VOLRxnBF Pins; IOL = +8.5 mA, VDD = 4.5Vmax 0.6 V68
Low-Level Output Voltage VOLSO, CLKOUT; IOL = +2.1 mA, VDD = 4.5Vmax 0.6 V68
Low-Level Output Voltage VOLINT; IOL = +1.6 mA, VDD = 4.5Vmax 0.6 V68
Input Leakage Current ILIAll I/Os except OSC1 and TxnRTS Pins; CS = RESET = VDD, VIN = VSS to VDDmin -1 · max 1 uA68
Input Leakage Current ILIOSC1 Pinmin -5 · max 5 uA68
Internal Capacitance (all inputs and outputs) CINTTAMB = +25°C, fC = 1.0 MHz, VDD = 0V; characterized, not 100% testedmax 7 pF68
Operating Current IDDVDD = 5.5V, FOSC = 25 MHz, FCLK = 1 MHz, SO = Openmax 10 mA68
Standby Current (Sleep mode) IDDSCS, TxnRTS = VDD, Inputs tied to VDD or VSS, -40°C to +125°Cmax 8 uA68
Clock In Frequency FOSCExtended (E); characterized, not 100% testedmin 1 · max 25 MHz68
Clock In Period TOSCExtended (E); characterized, not 100% testedmin 40 · max 1000 ns68
Duty Cycle (External Clock input) tDUTYTOSH/(TOSH + TOSL); characterized, not 100% testedmin 0.45 · max 0.55 —68
Wake-up Noise Filter tWFExtended (E)min 100 ns69
RESET Pin Low Time tRLExtended (E)min 2 us69
CLKOUT Pin High Time tHCLKOUTTOSC = 40 ns; Note 1min 10 ns69
CLKOUT Pin Low Time tLCLKOUTTOSC = 40 ns; Note 1min 10 ns69
CLKOUT Pin Rise Time tRCLKOUTMeasured from 0.3 VDD to 0.7 VDD; Note 1max 10 ns69
CLKOUT Pin Fall Time tFCLKOUTMeasured from 0.7 VDD to 0.3 VDD; Note 1max 10 ns69
CLKOUT Propagation Delay tDCLKOUTNote 1max 100 ns69
Clock Frequency FCLKExtended (E)max 10 MHz70
CS Setup Time tCSSmin 50 ns70
CS Hold Time tCSHmin 50 ns70
CS Disable Time tCSDmin 50 ns70
Data Setup Time tSUmin 10 ns70
Data Hold Time tHDmin 10 ns70
Clock Rise Time tRCharacterized, not 100% testedmax 2 us70
Clock Fall Time tFCharacterized, not 100% testedmax 2 us70
Clock High Time tHImin 45 ns70
Clock Low Time tLOmin 45 ns70
Clock Delay Time tCLDmin 50 ns70
Clock Enable Time tCLEmin 50 ns70
Output Valid from Clock Low tVmax 45 ns70
Output Hold Time tHOmin 0 ns70
Output Disable Time tDISmax 100 ns70
Voltage Range VDDAVDDA Pinmin 4.5 · max 5.5 V71
Supply Current IDDVDDA Pin; Recessive; VTXD = VDDAtyp 5 · max 10 mA71
Supply Current IDDVDDA Pin; Dominant; VTXD = 0Vtyp 45 · max 70 mA71
Standby Current IDDSVDDA Pin; Includes IIOtyp 5 · max 15 uA71
High Level of the POR Comparator VPORHmin 3.8 · max 4.3 V71
Low Level of the POR Comparator VPORLmin 3.4 · max 4 V71
Hysteresis of POR Comparator VPORDmin 0.3 · max 0.8 V71
Digital Supply Voltage Range VIOVIO Pinmin 2.7 · max 5.5 V71
Supply Current on VIO IIORecessive; VTXD = VIOtyp 4 · max 30 uA71
Supply Current on VIO IIODominant; VTXD = 0Vtyp 85 · max 500 uA71
Standby Current IDDSVIO Pin; characterized, not 100% testedtyp 0.3 · max 1 uA71
Undervoltage Detection on VIO VUVD(IO)Characterized, not 100% testedtyp 1.2 V71
CANH, CANL: Recessive Bus Output Voltage VO(R)VTXD = VDDA; No loadmin 2 · max 3 V71
CANH, CANL: Bus Output Voltage in Standby VO(S)STBY = VTXD = VDDA; No loadmin -0.1 · typ 0 · max 0.1 V71
Recessive Output Current IO(R)-24V < VCAN < +24Vmin -5 · max 5 mA71
CANH: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 2.75 · typ 3.5 · max 4.5 V71
CANL: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 0.5 · typ 1.5 · max 2.25 V71
Symmetry of Dominant Output Voltage (VDD – VCANH – VCANL) VO(D)(M)VTXD = VSS; characterized, not 100% testedmin -400 · typ 0 · max 400 mV71
Dominant: Differential Output Voltage VO(DIFF)VTXD = VSS; RL = 50 to 65; Figure 7-2, Figure 7-4min 1.5 · typ 2 · max 3 V71
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDDA; Figure 7-2, Figure 7-4min -120 · typ 0 · max 12 mV71
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDDA; No load; Figure 7-2, Figure 7-4min -500 · typ 0 · max 50 mV71
CANH: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floatingmin -120 · typ 85 mA71
CANH: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL floating; VDDA = 5V, TAMB = +25°C; Note 1min -100 mA71
CANL: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floatingtyp 75 · max 120 mA71
CANL: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH floating; VDD = 5V, TAMB = +25°C; Note 1max 100 mA71
Recessive Differential Input Voltage VDIFF(R)(I)Normal mode; -12V < V(CANH, CANL) < +12V; Figure 7-6; Note 2min -1 · max 0.5 V72
Recessive Differential Input Voltage VDIFF(R)(I)Standby mode; -12V < V(CANH, CANL) < +12V; Figure 7-6; Note 2min -1 · max 0.4 V72
Dominant Differential Input Voltage VDIFF(D)(I)Normal mode; -12V < V(CANH, CANL) < +12V; Figure 7-6; Note 2min 0.9 V72
Dominant Differential Input Voltage VDIFF(D)(I)Standby mode; -12V < V(CANH, CANL) < +12V; Figure 7-6; Note 2min 1 V72
Differential Receiver Threshold VTH(DIFF)Normal mode; -12V < V(CANH, CANL) < +12V; Figure 7-6; Note 2min 0.5 · typ 0.7 · max 0.9 V72
Differential Receiver Threshold VTH(DIFF)Standby mode; -12V < V(CANH, CANL) < +12V; Figure 7-6; Note 2min 0.4 · max 1.15 V72
Differential Input Hysteresis VHYS(DIFF)Normal mode; see Figure 7-6; Note 1min 50 · max 200 mV72
Common-Mode Input Resistance RINNote 1min 10 · max 30 k72
Common-Mode Resistance Matching RIN(M)VCANH = VCANL; Note 1min -1 · typ 0 · max 1 %72
Differential Input Resistance RIN(DIFF)Note 1min 10 · max 100 k72
Common-Mode Input Capacitance CIN(CM)VTXD = VDDA; Note 1max 20 pF72
Differential Input Capacitance CIN(DIFF)VTXD = VDDA; Note 1max 10 pF72
CANH, CANL: Input Leakage ILIVDDA = VTXD = VSTBY = 0V, VIO = 0V, VCANH = VCANL = 5Vmin -5 · max 5 uA72
Low-Level Input Voltage VILTXD, STBYmin -0.3 V72
High-Level Input Current IIHTXD, STBYmin -1 · max 1 uA72
TXD: Low-Level Input Current IIL(TXD)min -270 · typ -150 · max -30 uA72
STBY: Low-Level Input Current IIL(STBY)min -30 · max -1 uA72
Low-Level Output Voltage VOLRXD; IOL = 4 mA; typical 8 mAmax 0.4 V72
Shutdown Junction Temperature TJ(SD)-12V < V(CANH, CANL) < +12V; Note 1min 165 · typ 175 · max 185 °C72
Shutdown Temperature Hysteresis TJ(HYST)-12V < V(CANH, CANL) < +12V; Note 1min 20 · max 30 °C72
Bit Time tBITExtended (E); RL = 60min 1 · max 69.44 us73
Bit Frequency fBITExtended (E); RL = 60min 14.4 · max 1000 kHz73
Delay TXD Low to Bus Dominant tTXD-BUSONmax 70 ns73
Delay TXD High to Bus Recessive tTXD-BUSOFFmax 125 ns73
Delay Bus Dominant to RXD tBUSON-RXDmax 70 ns73
Delay Bus Recessive to RXD tBUSOFF-RXDmax 110 ns73
Propagation Delay TXD to RXD tTXD-RXDNegative edge on TXDmax 125 ns73
Propagation Delay TXD to RXD tTXD-RXDPositive edge on TXDmax 235 ns73
Delay Bus Dominant to RXD (Standby mode) tFLTR(WAKE)Standby modemin 0.5 · typ 1 · max 4 us73
Delay Standby to Normal mode tWAKENegative edge on STBYmin 5 · typ 25 · max 40 us73
Permanent Dominant Detect Time tPDTTXD = 0Vtyp 1.25 ms73
Permanent Dominant Timer Reset tPDTRThe shortest Recessive pulse on TXD or CAN bus to reset permanent Dominant timertyp 100 ns73
Specified Temperature Range TAmin -40 · max 125 C77
Operating Temperature Range TAmin -40 · max 125 C77
Storage Temperature Range TAmin -65 · max 150 C77
Thermal Resistance, 28L-QFN 6x6 mm JA28L-QFN 6x6 mmtyp 32.8 C/W77
Transient Voltage on CANH, CANL (ISO-7637)Figure 7-5min -150 · max 100 V67
Virtual Junction Temperature, TVJ (IEC60747-1) TVJmin -40 · max 150 °C67
ESD Protection on CANH and CANL Pins (IEC 61000-4-2)IEC 61000-4-2min -8 · max 8 kV67
ESD Protection on CANH and CANL Pins (IEC 801; Human Body Model)IEC 801; Human Body Modelmin -8 · max 8 kV67
ESD Protection on All Other Pins (IEC 801; Human Body Model)IEC 801; Human Body Modelmin -4 · max 4 kV67
ESD Protection on All Pins (IEC 801; Machine Model)IEC 801; Machine Modelmin -300 · max 300 V67
ESD Protection on All Pins (IEC 801; Charge Device Model)IEC 801; Charge Device Modelmin -750 · max 750 V67
Supply Voltage VDDExtended (E): TAMB = -40°C to +125°Cmin 2.7 · max 5.5 V68
Register Retention Voltage VRETmin 2.4 V68
Internal Capacitance (all inputs and outputs) CINTTAMB = +25°C, fC = 1.0 MHz, VDD = 0V (Note 1)max 7 pF68
Clock In Frequency FOSCExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5V; characterized, not 100% testedmin 1 · max 25 MHz68
Clock In Period TOSCExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5V; characterized, not 100% testedmin 40 · max 1000 ns68
Wake-up Noise Filter tWFExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmin 100 ns69
RESET Pin Low Time tRLExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmin 2 us69
CLKOUT Pin High Time tHCLKOUTTOSC = 40 ns (Note 1)min 10 ns69
CLKOUT Pin Low Time tLCLKOUTTOSC = 40 ns (Note 1)min 10 ns69
CLKOUT Pin Rise Time tRCLKOUTMeasured from 0.3 VDD to 0.7 VDD (Note 1)max 10 ns69
CLKOUT Pin Fall Time tFCLKOUTMeasured from 0.7 VDD to 0.3 VDD (Note 1)max 10 ns69
Clock Frequency FCLKExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmax 10 MHz70
Clock Rise Time tRNote 1max 2 us70
Clock Fall Time tFNote 1max 2 us70
High Level of the POR Comparator VPORHVDDA Pinmin 3.8 · max 4.3 V71
Low Level of the POR Comparator VPORLVDDA Pinmin 3.4 · max 4 V71
Hysteresis of POR Comparator VPORDVDDA Pinmin 0.3 · max 0.8 V71
Supply Current on VIO IIOVIO Pin; Recessive; VTXD = VIOtyp 4 · max 30 uA71
Supply Current on VIO IIOVIO Pin; Dominant; VTXD = 0Vtyp 85 · max 500 uA71
Standby Current IDDSVIO Pin; Note 1typ 0.3 · max 1 uA71
Undervoltage Detection on VIO VUVD(IO)Note 1typ 1.2 V71
Symmetry of Dominant Output Voltage (VDD – VCANH – VCANL) VO(D)(M)VTXD = VSS (Note 1)min -400 · typ 0 · max 400 mV71
CANH: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floating; VDDA = 5V, TAMB = +25°C (Note 1)min -100 mA71
CANL: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floating; VDD = 5V, TAMB = +25°C (Note 1)max 100 mA71
Recessive Differential Input Voltage VDIFF(R)(I)Normal mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6 (Note 2)min -1 · max 0.5 V72
Recessive Differential Input Voltage VDIFF(R)(I)Standby mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6 (Note 2)min -1 · max 0.4 V72
Dominant Differential Input Voltage VDIFF(D)(I)Normal mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6 (Note 2)min 0.9 V72
Dominant Differential Input Voltage VDIFF(D)(I)Standby mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6 (Note 2)min 1 V72
Differential Receiver Threshold VTH(DIFF)Normal mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6 (Note 2)min 0.5 · typ 0.7 · max 0.9 V72
Differential Receiver Threshold VTH(DIFF)Standby mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6 (Note 2)min 0.4 · max 1.15 V72
Differential Input Hysteresis VHYS(DIFF)Normal mode; see Figure 7-6 (Note 1)min 50 · max 200 mV72
Common-Mode Resistance Matching RIN(M)VCANH = VCANL (Note 1)min -1 · typ 0 · max 1 %72
Common-Mode Input Capacitance CIN(CM)VTXD = VDDA (Note 1)max 20 pF72
Differential Input Capacitance CIN(DIFF)VTXD = VDDA (Note 1)max 10 pF72
Low-Level Input Voltage VILDIGITAL INPUT PINS (TXD, STBY)min -0.3 V72
High-Level Input Current IIHDIGITAL INPUT PINS (TXD, STBY)min -1 · max 1 uA72
Low-Level Output Voltage VOLRECEIVE DATA (RXD) OUTPUT; IOL = 4 mA; typical 8 mAmax 0.4 V72
Shutdown Junction Temperature TJ(SD)-12V < V(CANH, CANL) < +12V (Note 1)min 165 · typ 175 · max 185 °C72
Shutdown Temperature Hysteresis TJ(HYST)-12V < V(CANH, CANL) < +12V (Note 1)min 20 · max 30 °C72
Bit Time tBITExtended (E): TAMB = -40°C to +125°C; VDDA = 4.5V to 5.5V, VIO = 2.7V to 5.5V, RL = 60min 1 · max 69.44 us73
Bit Frequency fBITmin 14.4 · max 1000 kHz73

Pins, by the datasheet

29
1 CS
SPI Chip Select Input. · p. 4
2 RESET
Reset Input. · p. 4
3 VDD
Power for CAN Controller. · p. 4
4 TxCAN
Transmit Output to CAN Transceiver. · p. 4
5 RXCAN
Receive Input from CAN Transceiver. · p. 4
6 CLKOUT
Clock Output/SOF. · p. 4
7 Tx0RTS
TXB0 Request-to-Send. · p. 4
8 Tx1RTS
TXB1 Request-to-Send. · p. 4
9 Tx2RTS
TXB2 Request-to-Send. · p. 4
10 RXD
Receive Data Output to CAN Controller. · p. 4
11 VIO
Digital I/O Supply Pin for CAN Transceiver. · p. 4
12 CANL
CAN Low-Level Voltage I/O. · p. 4
13 CANH
CAN High-Level Voltage I/O. · p. 4
14 NC
No Connection. · p. 4
15 STBY
Standby Mode Input. · p. 4
16 TXD
Transmit Data Input from CAN Controller. · p. 4
17 NC
No Connection. · p. 4
18 VSS
Ground. · p. 4
19 VDDA
Power for CAN Transceiver. · p. 4
20 OSC2
External Oscillator Output. · p. 4
21 OSC1
External Oscillator Input. · p. 4
22 GND
Ground. · p. 4
23 Rx1BF
RxB1 Interrupt. · p. 4
24 Rx0BF
RxB0 Interrupt. · p. 4
25 INT
Interrupt Output. · p. 4
26 SCK
SPI Clock Input. · p. 4
27 SI
SPI Data Input. · p. 4
28 SO
SPI Data Output. · p. 4
29 EP
Exposed Thermal Pad. · p. 4

Open-source boards using it

12See all 12
  • 2 layers68 × 58 mmCAN Firewall, the printed circuit board in 3D

    CAN Firewall

    PDXostc/canfw

    CAN Firewall project

    80 parts12MPL-2.0
  • 4 layers141.6 × 116.1 mmFlat sat dev board, the printed circuit board in 3D

    Flat sat dev board

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    371 parts1
  • 4 layers98 × 53 mm2025 rover CAN board, the printed circuit board in 3D

    2025 rover CAN board

    maramirok/Rover-arm-hardware

    Custom motor control PCB for the Space Concordia Mars rover robotic arm, designed in KiCad.

    73 parts
  • 4 layers30 × 87.6 mm26-107-2 MAIN, the printed circuit board in 3D

    26-107-2 MAIN

    SCRB-Hardware/SCRB-26-107

    BlueBus Status Indicator

    54 parts
  • 4 layers75 × 50 mmEOPRA interface, the printed circuit board in 3D

    EOPRA interface

    seanboe/eOPRA_suite

    Contains the board files (KiCAD + gerbers) and CLI for the eOPRA device control suite used in research on transfemoral and transtibial prosthetics at the MIT Biomechatronics Lab.

    256 parts
  • 2 layers68 × 44 mmCAN Firewall, the printed circuit board in 3D

    CAN Firewall

    PDXostc/canfw

    CAN Firewall project

    56 parts12MPL-2.0
  • 2 layers68 × 58 mmCAN Firewall, the printed circuit board in 3D

    CAN Firewall

    PDXostc/canfw

    CAN Firewall project

    70 parts12MPL-2.0
  • 4 layers88 × 94.5 mmFC V4c Express, the printed circuit board in 3D

    FC V4c Express

    proveskit/flight_controller_board

    The main flight computer board for the PROVES Kit.

    155 parts6CERN-OHL-W-2.0

Questions

Is there a KiCad symbol and footprint for the MCP25625-E/ML?

Yes. The symbol is EasyEDA_Cloud:MCP25625T-E_ML and the footprint EasyEDA_Cloud:QFN-28_L6.0-W6.0-P0.65-BL-EP3.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP25625-E/ML?

QFN-28-EP(6x6), with 29 pins. Its footprint is drawn on this page.

Where is the MCP25625-E/ML datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP25625-E/ML?

JLCPCB lists it as part C191253, with 2,740 in stock; the sellers' links on this page open their listings.

Which open-source boards use the MCP25625-E/ML?

12 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.